Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
60.12.9.012.2040 Finder General purpose relay 2pole 10A DC 12V
60.12.9.012.2040 Finder General purpose relay 2pole 10A DC 12V.
This product has been discontinued
A direct replacement is available below.
Replacement product
60.12.9.012.0040 Finder General purpose relay 2pole 10A DC 12V
SKU: 60.12.9.012.0040
£11.17 ex VAT
View
Why Choose the Finder 60.12.9.012.2040 General Purpose Relay?
The Finder 60.12.9.012.2040 is a dependable 12 V DC general-purpose electromagnetic relay designed for industrial automation, electrical control panels and auxiliary switching applications. Part of the established Finder 60 Series, this relay features two changeover contacts (DPDT / 2 CO) rated at 10 A, providing flexible switching for electrical control circuits.
Designed for convenient installation and maintenance, the Finder 60.12.9.012.2040 incorporates a lockable test button and mechanical status indicator. These features assist engineers and maintenance technicians with manual functional testing, commissioning and troubleshooting. Its two independent changeover contact sets allow separate circuits to be controlled using a single electromagnetic coil.
With a 12 V DC operating coil, silver nickel (AgNi) contacts and an 8-pin octal plug-in connection, this relay provides a practical solution for machinery control, electrical interlocking, signalling and industrial automation. Its socket-mounted design enables straightforward replacement using a compatible Finder 90 Series relay socket.
Key Advantages
- 12 V DC operating coil suitable for compatible low-voltage DC control circuits.
- Two changeover contacts (DPDT) provide flexible switching of independent circuits.
- 10 A rated contact current supports a range of industrial control applications.
- Lockable test button enables manual functional testing during commissioning and maintenance.
- Mechanical status indicator provides visible confirmation of relay operation.
- Silver nickel (AgNi) contacts offer cadmium-free electrical switching.
- 8-pin octal plug-in design simplifies installation and relay replacement.
- Monostable electromagnetic operation provides predictable switching behaviour.
- Suitable for industrial control panels, machinery, signalling and automation equipment.
- Compatible with appropriately selected Finder 90 Series relay sockets.
Key Features
- Finder 60 Series general-purpose industrial relay.
- 60.12 configuration with two changeover contacts.
- 12 V DC nominal coil voltage.
- 10 A rated contact current.
- DPDT / 2 CO contact arrangement.
- 250 V AC rated contact voltage.
- 2500 VA rated switching capacity for resistive AC loads.
- Silver nickel (AgNi) contact material.
- Lockable test button for manual contact actuation.
- Mechanical indicator for visual operating status.
- 8-pin octal plug-in terminals.
- Non-latching electromagnetic mechanism.
- Two independent changeover contact sets for multi-circuit control.
- Designed for use with compatible industrial relay sockets.
Reliable Electromagnetic Switching for Industrial Control Systems
The Finder 60.12.9.012.2040 operates through an electromagnetic coil that actuates two independent changeover contact sets. When the 12 V DC coil is energised, the relay transfers its contacts from their normal positions to their operated positions. When the coil supply is removed, the spring-return mechanism restores the contacts to their normal state. This arrangement allows a low-voltage control signal to operate appropriately rated external circuits.
The DPDT configuration makes this relay suitable for electrical interlocking, auxiliary equipment control and signalling functions requiring two switching circuits. Its lockable test button enables manual contact actuation for testing, while the mechanical indicator provides a visual indication of the relay mechanism's state. The octal plug-in format also supports convenient maintenance and replacement in industrial control installations.
Typical Applications
- Industrial automation and machine control systems.
- Electrical control panels and switchgear assemblies.
- 12 V DC control and auxiliary circuits.
- Electrical interlocking and signalling systems.
- Motor control auxiliary circuits and contactor interfaces.
- Industrial alarm and monitoring equipment.
- Building automation and equipment control.
- Process control and instrumentation interfaces.
- Control circuit isolation and signal interfacing.
- OEM machinery and industrial panel building.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 10 A | |
| Manufacturer | Finder | |
| Series | 60 Series | |
| Model | 60.12.9.012.2040 | |
| Product type | General-purpose electromagnetic relay | |
| Relay configuration | DPDT / 2 CO | |
| Number of poles | 2 | |
| Number of changeover contacts | 2 | |
| Rated contact current | 10 A | |
| Rated contact voltage | 250 V AC | |
| Rated switching capacity (AC1) | 2500 VA | |
| Nominal coil voltage | 12 V DC | |
| Coil supply type | DC | |
| Nominal coil resistance | 110 Ω | |
| Nominal coil consumption | Approximately 1.3 W | |
| Minimum operate voltage | 9.6 V DC | |
| Contact material | Silver nickel (AgNi) | |
| Operating principle | Electromagnetic, monostable | |
| Mounting type | Plug-in socket mounting | |
| Terminal configuration | 8-pin octal | |
| Compatible socket family | Finder 90 Series, subject to socket model | |
| Test function | Lockable test button | |
| Status indication | Mechanical indicator | |
| Typical operate time | 11 ms | |
| Typical release time | 4 ms | |
| Operating temperature | −40 to +70 °C | |
| Dimensions | 36.4 × 32.5 × 54.2 mm |
Frequently Asked Questions
What is the Finder 60.12.9.012.2040 used for?
The Finder 60.12.9.012.2040 is a general-purpose electromagnetic relay used to switch electrical circuits in industrial automation, machinery control, signalling and electrical control panels.
What coil voltage does the Finder 60.12.9.012.2040 require?
This relay requires a 12 V DC nominal coil supply. It is designed for compatible DC control circuits and should not be connected directly to an AC coil supply.
How many changeover contacts does this relay have?
The relay features two changeover contacts (2 CO), also described as a DPDT configuration. Both contact sets operate together when the relay coil is energised.
What is the contact current rating of the Finder 60.12.9.012.2040?
The relay has a 10 A rated contact current. The permissible switching load depends on the applied voltage, load type and the manufacturer's applicable contact ratings.
Does the Finder 60.12.9.012.2040 have a lockable test button?
Yes. The relay includes a lockable test button for manually actuating its contacts during commissioning and functional testing. Manual operation should only be performed under appropriate electrical safety conditions.
Does this relay include a mechanical indicator?
Yes. The Finder 60.12.9.012.2040 incorporates a mechanical status indicator that provides visual confirmation of the relay mechanism's operating position.
What contact material is used in the Finder 60.12.9.012.2040?
The relay uses silver nickel (AgNi) contacts, a cadmium-free contact material commonly used for reliable general-purpose electrical switching.
How is the Finder 60.12.9.012.2040 installed?
The relay uses an 8-pin octal plug-in connection and is designed for installation in a compatible industrial relay socket, including appropriately selected Finder 90 Series sockets.
Can the Finder 60.12.9.012.2040 operate from a 12 V AC supply?
No. This model has a 12 V DC coil. Applications requiring a 12 V AC control supply should use a suitable relay with an AC-rated coil.
Is this relay suitable for switching DC loads?
Yes, it can switch suitable DC loads when the contact voltage, current and load characteristics remain within the manufacturer's specified DC switching limits. The 10 A AC contact rating should not automatically be applied to DC loads.
Trusted by Industrial Automation and Control Panel Professionals
Finder 60 Series relays are established components in industrial electrical control and automation applications. The Finder 60.12.9.012.2040 combines a 12 V DC coil, two 10 A changeover contacts, a lockable test button and a mechanical indicator in a practical octal plug-in design for dependable switching and convenient maintenance.
