Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
58.34.9.125.0059SMA Finder 4 CO Contacts 125V DC Modular Interface Relay
Finder 58.34.9.125.0059SMA is a 58 Series DIN rail-mounted relay interface module featuring a 125 V DC coil, four changeover contacts and a 6 A resistive contact rating at 250 V AC for industrial automation, PLC interfacing and electrical control applications.
£34.48
Why Choose the Finder 58.34.9.125.0059SMA Relay Interface Module?
The Finder 58.34.9.125.0059SMA is a compact and reliable four-pole electromechanical relay interface module designed for industrial automation, PLC interfacing and electrical control applications. As part of the established Finder 58 Series relay interface module range, it combines a 125 V DC operating coil, four changeover contacts and a convenient DIN rail mounting arrangement to provide dependable switching in industrial electrical installations.
Featuring a 4PDT (four-pole double-throw) contact configuration, this relay interface module allows four independent electrical circuits to be switched using a single control signal. Its integrated relay and socket assembly simplifies installation, while the screw terminal connections provide secure wiring within electrical control panels. The 58 Series also incorporates coil status indication and suppression functionality to support reliable operation in electronic control systems.
With a 125 V DC nominal coil voltage and 6 A resistive contact rating at 250 V AC, the Finder 58.34.9.125.0059SMA is suitable for industrial control circuits, signalling equipment and auxiliary switching applications. Its 27 mm wide DIN rail-mounted construction enables efficient installation inside electrical cabinets, while the specialised 0059 configuration is associated with the Finder 58 Series range of relay interfaces intended for demanding industrial installations.
Key Advantages
- Reliable four-pole relay interface module for industrial automation and PLC control applications.
- 125 V DC operating coil suitable for compatible industrial DC control circuits.
- 4PDT changeover contact configuration enables switching of four independent electrical circuits.
- 6 A resistive contact rating at 250 V AC for industrial electrical switching.
- 15 A maximum peak contact current under specified switching conditions.
- Integrated coil status indication and suppression support dependable control system operation.
- Screw terminal connections provide secure and convenient electrical wiring.
- 35 mm DIN rail mounting allows straightforward installation inside control cabinets.
- Compact 27 mm wide design helps optimise panel space.
- Four changeover contacts provide flexible normally open and normally closed switching arrangements.
- Modular relay interface construction simplifies maintenance and replacement.
- Suitable for PLC interfacing, industrial machinery, signalling and electrical control systems.
Key Features
- Finder 58 Series relay interface module.
- 58.34 four-pole relay interface configuration.
- 125 V DC nominal coil voltage.
- Four changeover contacts (4 CO / 4PDT).
- 6 A rated resistive switching current at 250 V AC.
- 6 A rated resistive switching current at 24 V DC.
- 15 A maximum peak contact current.
- 250 V AC maximum switching voltage.
- 220 V DC maximum switching voltage, subject to the applicable DC load limits.
- Integrated coil indication and suppression module.
- Four independent changeover contacts for flexible circuit control.
- Screw terminal connections for secure electrical installation.
- 35 mm DIN rail mounting in accordance with EN 60715.
- 27 mm module width for compact panel installation.
- 11 ms typical operating time.
- 15 ms typical release time.
- Operating temperature range of −40 to +70 °C.
- Suitable for industrial PLC interfaces and electronic control systems.
Reliable PLC Interfacing and Industrial Electrical Control
Relay interface modules such as the Finder 58.34.9.125.0059SMA provide an effective connection between industrial control circuits and electrical switching loads. When the 125 V DC coil is energised, the relay's electromagnetic mechanism changes the state of its four changeover contacts, allowing multiple circuits to be operated simultaneously. This provides galvanic isolation between the coil circuit and the switched contact circuits while enabling flexible control of connected equipment.
The Finder 58 Series is designed for industrial automation engineers, panel builders and electrical maintenance professionals requiring compact, serviceable relay interfaces. Its integrated coil indication and suppression, DIN rail mounting and screw terminal connections simplify integration into modern control systems. The four-pole arrangement is particularly useful for applications requiring multiple signalling, interlocking or auxiliary switching functions from a single control signal.
Typical Applications
- Industrial PLC interface and control circuits.
- Electrical automation and machinery control panels.
- Industrial signalling and alarm systems.
- Control circuit interlocking and auxiliary switching.
- Electrical distribution and industrial control cabinets.
- Power generation and industrial electrical installations.
- Process control and manufacturing automation systems.
- Control of contactors, actuators and auxiliary equipment within the relay's rated capacity.
- Industrial monitoring and status indication circuits.
- Building automation and electrical control systems.
- Maintenance and replacement of compatible Finder 58 Series relay interface modules.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Interface Relay | |
|---|---|---|
| Terminal Type | Screw | |
| Mounting Type | DIN rail | |
| Manufacturer | Finder | |
| Series | 58 Series Relay Interface Modules | |
| Model | 58.34.9.125.0059SMA | |
| Product type | Electromechanical relay interface module | |
| Relay configuration | 4 CO / 4PDT | |
| Number of poles | 4 | |
| Nominal coil voltage | 125 V DC | |
| Coil supply type | Direct current (DC) | |
| Contact configuration | Four independent changeover contacts | |
| Rated resistive AC contact current | 6 A at 250 V AC | |
| Rated resistive DC contact current | 6 A at 24 V DC | |
| Maximum peak contact current | 15 A | |
| Maximum AC switching voltage | 250 V AC | |
| Maximum DC switching voltage | 220 V DC | |
| Typical operating time | 11 ms | |
| Typical release time | 15 ms | |
| Operating temperature | −40 to +70 °C | |
| Terminal type | Screw terminals | |
| Mounting type | DIN rail mounting | |
| DIN rail compatibility | 35 mm rail (EN 60715) | |
| Module width | 27 mm | |
| Coil indication | Integrated status indication | |
| Coil protection | Integrated suppression module | |
| Construction | Relay and socket interface assembly | |
| Typical applications | PLC interfacing, industrial automation, signalling and electrical control panels |
Frequently Asked Questions
What is the Finder 58.34.9.125.0059SMA used for?
The Finder 58.34.9.125.0059SMA is a four-pole relay interface module designed for industrial automation, PLC interfacing, signalling and electrical control applications. It allows four independent circuits to be switched using a single control signal.
What coil voltage does the Finder 58.34.9.125.0059SMA require?
The relay interface module uses a 125 V DC nominal operating coil and is intended for compatible direct-current control circuits. The correct DC supply voltage and polarity should be observed during installation.
What is the contact rating of this relay interface module?
The Finder 58.34.9.125.0059SMA has a 6 A resistive contact rating at 250 V AC and 6 A at 24 V DC, with a maximum peak contact current of 15 A. Actual switching capacity depends on the connected load, voltage and operating conditions.
What does the 4PDT contact configuration mean?
4PDT means four-pole double-throw. The module contains four independent changeover contacts, each providing common, normally open and normally closed connections. This allows four separate electrical circuits to be switched simultaneously when the relay coil is energised.
How is the Finder 58.34.9.125.0059SMA installed?
The relay interface module is designed for mounting on a 35 mm DIN rail in accordance with EN 60715. It features screw terminal connections and a compact 27 mm wide housing, making it suitable for installation inside industrial electrical cabinets and automation control panels.
Trusted by Industrial Automation Professionals Worldwide
Finder 58 Series relay interface modules provide reliable electrical switching and control circuit interfacing for industrial automation, machinery and electrical installations. The Finder 58.34.9.125.0059SMA combines four-pole switching flexibility, a 125 V DC operating coil and convenient DIN rail installation, making it a practical choice for electrical engineers, panel builders and industrial maintenance professionals.
