Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
56.42.8.230.0300 Finder Miniature power relay 2pole 12A 230V.
The Finder 56.42.8.230.0300 is a 12 A miniature electromechanical power relay designed for industrial automation, electrical control equipment and printed circuit board (PCB) applications. Part of the established Finder 56 Series, this specialist relay features two normally open contacts with an extended contact gap, making it suitable for applications requiring dependable two-pole switching and enhanced contact separation.
Featuring a 230 V AC operating coil and two normally open contacts (2 NO / DPST-NO), the Finder 56.42.8.230.0300 enables two separate electrical circuits to be switched simultaneously. Its minimum 1.5 mm contact gap distinguishes the -0300 configuration from standard 56.42 changeover relays and provides increased physical separation between open contacts.
With a 12 A rated contact current, 250 V AC rated switching voltage and 3,000 VA AC1 resistive switching capacity, this relay provides a practical solution for industrial control systems, equipment manufacturers and electrical engineers. Its PCB mounting configuration allows direct integration into electronic assemblies and dedicated control boards.
A distinguishing feature of the Finder 56.42.8.230.0300 is its two normally open contact arrangement with a minimum 1.5 mm contact gap. Unlike the standard Finder 56.42 changeover version, the -0300 configuration provides two normally open switching paths without normally closed contact terminals.
When the relay's 230 V AC coil is energised, its electromagnetic mechanism closes both normally open contacts simultaneously. This allows two separate electrical circuits to be switched using one control signal. When the coil supply is removed, the contacts return to their normally open positions.
The extended contact gap provides greater physical separation between the contacts in their open state. The Finder 56.42-0300 configuration also specifies 2,000 V AC dielectric strength between open contacts, compared with the lower open-contact dielectric strength of standard changeover configurations.
This makes the relay useful for appropriately designed control systems where two-pole switching and increased contact separation are required. However, the contact gap alone does not establish suitability for safety isolation or every category of electrical disconnection. The complete application must comply with the relevant installation standards and the manufacturer's insulation specifications.
The PCB mounting arrangement allows the relay to be soldered directly into a compatible printed circuit board. Designers must provide the correct PCB footprint, suitable conductor spacing, adequate copper track capacity and appropriate circuit protection for the connected load.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | PCB / pins | |
| Switching Current (A) | 12 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | PCB | |
| Manufacturer | Finder | |
| Series | 56 Series | |
| Model | 56.42.8.230.0300 | |
| Product type | Miniature electromechanical power relay | |
| Relay configuration | Monostable / non-latching | |
| Number of poles | 2 | |
| Contact configuration | 2 NO (DPST-NO) | |
| Contact arrangement | Two normally open contacts, mechanically operated together | |
| Minimum open-contact gap | 1.5 mm | |
| Contact material | Silver nickel (AgNi) | |
| Rated contact current | 12 A | |
| Maximum peak contact current | 20 A | |
| Rated switching voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive load (AC1) | 3,000 VA | |
| Rated inductive load (AC15) | 700 VA at 230 V AC | |
| Single-phase motor rating | 0.55 kW at 230 V AC | |
| DC1 breaking capacity at 30 V DC | 12 A | |
| DC1 breaking capacity at 110 V DC | 1 A | |
| DC1 breaking capacity at 220 V DC | 0.5 A | |
| Minimum switching load | 500 mW (10 V / 5 mA) | |
| Nominal coil voltage | 230 V AC | |
| Coil supply type | AC | |
| Coil frequency | 50/60 Hz | |
| Rated AC coil consumption | 1.5 VA at 50 Hz | |
| AC coil operating range | 85–110% of nominal voltage | |
| Approximate coil operating voltage range | 195.5–253 V AC | |
| Operate time | Approximately 8 ms | |
| Release time | Approximately 4 ms | |
| Coil-to-contact impulse withstand voltage | 4 kV (1.2/50 µs) | |
| Dielectric strength between open contacts | 2,000 V AC | |
| Mechanical life | 20 million operations | |
| Electrical life at rated AC1 load | 100,000 operations | |
| Operating temperature | −40 to +70 °C | |
| Environmental protection | RT I | |
| Mounting type | Direct PCB mounting | |
| Terminal type | Solder pins | |
| Number of terminals | 6 | |
| Approximate dimensions | 27.7 × 20.7 × 36.8 mm | |
| Typical application | Industrial automation, PCB power switching and two-pole electrical control |
The Finder 56.42.8.230.0300 is a miniature electromechanical power relay designed for industrial automation, PCB switching and two-pole electrical control applications. It features a 230 V AC coil and two normally open contacts rated at 12 A.
The standard Finder 56.42 has two changeover contacts (2 CO / DPDT). The 56.42-0300 has two normally open contacts (2 NO / DPST-NO) with a minimum 1.5 mm contact gap. The -0300 version is intended for applications requiring normally open two-pole switching and increased contact separation.
The relay uses a 230 V AC nominal operating coil designed for 50/60 Hz supplies. Its specified AC operating range is approximately 195.5–253 V AC.
No. The Finder 56.42.8.230.0300 is a PCB mounting relay with solder terminals. It is designed for direct installation into a compatible printed circuit board rather than direct DIN rail mounting.
The 1.5 mm contact gap is the minimum physical separation between the normally open contacts when the relay is de-energised. This configuration provides increased open-contact separation and a specified dielectric strength of 2,000 V AC between open contacts. Suitability for a particular isolation or disconnection requirement must be verified against the relevant standards.
Finder 56 Series miniature power relays provide dependable electromechanical switching solutions for industrial automation, electrical control systems and electronic equipment. The specialist 56.42-0300 configuration combines two-pole normally open switching with an extended contact gap, supporting engineers and equipment manufacturers who require reliable PCB-mounted relay performance.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.