Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 56.34.9.220.0020 is a 56 Series four-pole electromechanical power relay with a 220 V DC coil and 4PDT changeover contacts, designed for industrial automation, electrical switching and control panel applications.
The Finder 56.34.9.220.0020 is a robust and reliable four-pole electromechanical power relay designed for switching electrical loads in industrial control panels, automation systems and electrical machinery. As part of the established Finder 56 Series miniature power relay range, it provides dependable switching performance with four changeover contacts and a 220 V DC coil.
This industrial relay is designed to provide electrical isolation between control and load circuits while allowing multiple circuits to be switched simultaneously. Its 4PDT (four-pole double-throw) contact configuration offers flexible normally open and normally closed switching arrangements, making it suitable for control logic, signalling, interlocking and industrial equipment operation.
With a 12 A rated contact current and 250 V AC rated contact voltage, the Finder 56.34.9.220.0020 is suitable for a wide range of industrial switching applications. Its plug-in construction allows installation with compatible Finder 96 Series relay sockets, supporting straightforward wiring, maintenance and replacement inside electrical control cabinets.
Electromechanical power relays such as the Finder 56.34.9.220.0020 allow a control circuit to operate separate electrical loads through electromagnetically actuated contacts. When the relay coil is energised, its internal armature changes the state of the contacts, enabling controlled switching between normally open and normally closed circuits.
The Finder 56 Series is designed for industrial installations requiring dependable switching, straightforward maintenance and flexible circuit control. Its four-pole configuration allows multiple control functions to be operated from a single relay coil, reducing the need for separate switching components in suitable applications. The plug-in construction also simplifies relay replacement and servicing when used with compatible sockets.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 400 V AC | |
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 12 A | |
| Manufacturer | Finder | |
| Series | 56 Series Miniature Power Relays | |
| Model | 56.34.9.220.0020 | |
| Product type | Electromechanical miniature power relay | |
| Relay configuration | 4 CO / 4PDT | |
| Number of poles | 4 | |
| Nominal coil voltage | 220 V DC | |
| Coil supply type | Direct current (DC) | |
| Rated contact current | 12 A | |
| Maximum peak contact current | 20 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive load (AC1) | 3,000 VA | |
| Contact arrangement | Four independent changeover contacts | |
| Standard contact material | Silver nickel (AgNi) | |
| Mounting type | Plug-in / socket mounting | |
| Terminal type | Faston 187 quick-connect terminals | |
| Compatible socket series | Finder 96 Series | |
| Operating principle | Electromagnetic switching | |
| Typical applications | Industrial automation, control panels and electrical machinery |
The Finder 56.34.9.220.0020 is an electromechanical power relay used for switching electrical circuits in industrial automation, machinery control, electrical panels and signalling applications. Its four changeover contacts allow multiple circuits to be controlled simultaneously.
The relay uses a 220 V DC nominal operating coil and is designed for compatible direct-current control circuits.
The Finder 56.34 relay type has a 12 A rated contact current and a 250 V AC rated contact voltage. The permissible switching load depends on the electrical characteristics of the connected circuit.
4PDT means four-pole double-throw. The relay contains four independent changeover contacts, each capable of switching between normally closed and normally open connections when the coil is energised.
The relay uses a plug-in mounting arrangement and can be installed with an appropriately selected Finder 96 Series socket inside an electrical control panel or industrial equipment enclosure. The socket and wiring must be suitable for the relay's contact arrangement and electrical ratings.
Finder 56 Series miniature power relays provide dependable electromechanical switching for industrial automation, machinery control and electrical installations. Their versatile contact arrangements, robust construction and convenient plug-in mounting make them a practical choice for electrical engineers, panel builders and industrial maintenance professionals.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.