55.32.9.048.2000 Finder Miniature plugin relay 2pole 10A DC 48V

Why Choose the Finder 55.32.9.048.2000 Industrial Plug-In Relay?

The Finder 55.32.9.048.2000 is a versatile 48 V DC industrial electromagnetic relay designed for reliable electrical switching in industrial automation, machinery controls and electrical control panels. Part of the established Finder Series 55 range, this general-purpose relay provides two independent changeover contacts for flexible control of electrical circuits.

Featuring a double-pole double-throw (DPDT / 2 CO) contact arrangement, the Finder 55.32.9.048.2000 allows two separate circuits to be switched using a single electromagnetic coil. Its 10 A contact rating at 250 V AC for resistive loads makes it suitable for auxiliary switching, control logic and industrial equipment applications.

Designed for plug-in socket mounting, the relay supports convenient installation and replacement using a compatible Finder socket. With a 48 V DC coil, silver cadmium oxide (AgCdO) contacts and monostable electromagnetic operation, it offers a practical switching solution for panel builders, maintenance engineers and OEM equipment manufacturers.

Key Advantages

• 48 V DC electromagnetic coil for compatible industrial DC control circuits.
• DPDT / 2 CO configuration provides two independent changeover contact sets.
• 10 A rated contact current for appropriately rated resistive loads.
• 250 V AC rated contact voltage for industrial switching applications.
• Silver cadmium oxide (AgCdO) contacts for dependable electrical switching.
• Plug-in mounting allows straightforward installation and replacement.
• Compatible socket connection supports organised control panel wiring.
• 2.4 kΩ nominal coil resistance for predictable control circuit design.
• 20 mA nominal coil current at 48 V DC.
• Approximately 0.96 W coil consumption for conventional industrial relay operation.
• Monostable operation automatically returns the contacts to their normal positions when de-energised.
• Two changeover circuits enable combined load switching and auxiliary signalling.
• Suitable for automation systems, machinery controls and electrical control panels.

Key Features

• Finder Series 55.32 industrial electromagnetic relay.
• 48 V DC nominal coil voltage.
• Two changeover contacts (DPDT / 2 Form C).
• 10 A rated switching current per contact set.
• 250 V AC rated contact voltage.
• 2,400 Ω nominal coil resistance.
• 20 mA nominal coil current.
• 0.96 W nominal coil power.
• Silver cadmium oxide contact material.
• Plug-in terminals for compatible relay sockets.
• Non-polarised DC coil.
• Monostable, non-latching electromagnetic operation.
• Compact industrial housing.
• Compatible with selected Finder Series 94 sockets.

Reliable 48 V DC Dual-Contact Switching for Industrial Control Systems

The Finder 55.32.9.048.2000 uses a 48 V DC electromagnetic coil to operate two independent changeover contact sets. When the coil is energised, both contacts transfer from their normally closed positions to their normally open positions. When the coil supply is removed, the relay returns to its normal state, providing predictable control of connected electrical circuits.

The DPDT contact arrangement enables engineers to switch two separate circuits using one control signal. This makes the relay useful for auxiliary load switching, status indication, equipment control and electrical interlocking. Each contact set has a 10 A resistive AC rating, although actual switching capability depends on the load characteristics, voltage, inrush current and operating frequency.

The relay's plug-in construction makes it particularly suitable for electrical control panels where straightforward maintenance and replacement are important. When installed in a compatible Finder socket, the relay can be removed without disconnecting the field wiring from the socket. Appropriate coil suppression, contact protection and socket selection should be considered during system design.

Typical Applications

• Industrial automation and machine control systems.
• Electrical control panels and switchgear assemblies.
• PLC interface and auxiliary switching circuits.
• 48 V DC industrial control systems.
• Motor control auxiliary circuits.
• Industrial process control and monitoring equipment.
• Building automation and HVAC control systems.
• Equipment status signalling and alarm circuits.
• Electrical interlocking and changeover functions.
• Industrial pumps, fans and ventilation controls.
• Conveyor and packaging machinery.
• OEM machinery and electrical equipment assemblies.
• Maintenance and replacement of compatible industrial plug-in relays.