55.32.9.024.2020 Finder Miniature plugin relay 2pole 10A DC 24V

Why Choose the Finder 55.32.9.024.2020 Industrial Plug-In Relay?

The Finder 55.32.9.024.2020 is an industrial electromagnetic relay from the Finder Series 55 range, designed for general-purpose electrical switching and control applications. Featuring a 24 V DC coil and two changeover contacts (DPDT / 2 CO), the relay enables two separate circuits to be controlled simultaneously using a single electrical control signal.

The Finder 55.32 relay family provides a 10 A rated contact current and a 250 V AC rated switching voltage for suitable resistive loads. Its plug-in construction is intended for compatible relay sockets, making it particularly useful in industrial control panels, automation systems and maintenance applications where convenient relay replacement is important.

The 55.32.9.024.2020 belongs to the 24 V DC, two-pole Series 55 relay family. The exact 2020 ordering suffix should be matched against the manufacturer's variant-specific information when identifying any additional construction or indication features. The established 55.32 electrical characteristics provide a useful basis for selecting this relay for compatible industrial switching duties.

Key Advantages

• 24 V DC coil operation: Suitable for industrial control circuits using a compatible DC supply.
• Two changeover contacts: Enables simultaneous switching of two independent circuits.
• 10 A contact rating: Supports suitable general-purpose electrical switching loads.
• DPDT contact configuration: Provides normally open and normally closed functions on both poles.
• Plug-in mounting: Allows installation into a compatible relay socket without direct soldering.
• Socket-based replacement: Simplifies relay removal during equipment maintenance.
• Monostable operation: Contacts return to their normal positions when the coil is de-energised.
• Compact industrial design: Suitable for control panels and automation equipment.
• 600 Ω nominal coil resistance: Supports straightforward control circuit calculations.
• Finder Series 55 platform: Part of an established industrial relay family with compatible socket and accessory options.

Key Features

• Finder Series 55 industrial electromagnetic relay.
• Type 55.32 with two changeover contacts.
• 24 V DC nominal coil voltage.
• DPDT / 2 CO / 2 Form C contact configuration.
• 10 A rated contact current.
• 250 V AC rated switching voltage.
• 600 Ω nominal coil resistance.
• 40 mA nominal coil current.
• 0.96 W nominal DC coil consumption.
• Plug-in relay construction.
• Compatible with suitable Finder Series 94 relay sockets.
• Monostable electromagnetic switching.
• Suitable for industrial automation, electrical control and auxiliary switching.

Dual Changeover Switching for Industrial Automation and Control Panels

The Finder 55.32.9.024.2020 uses a 24 V DC electromagnetic coil to operate two changeover contact sets. Each set provides common, normally closed and normally open connections. When the coil is energised, both common contacts transfer to their normally open positions. When the coil is de-energised, the contacts return to their normal positions.

This DPDT switching arrangement is useful where one control signal must operate two separate circuits, such as an auxiliary control output and an equipment status indication. The relay's plug-in format also makes it practical for control panel maintenance, allowing the relay to be removed from a suitable socket without disturbing the fixed wiring.

The Finder 55.32 family is rated at 10 A for specified switching conditions, but allowable loads depend on their electrical characteristics. Motor, inductive, capacitive and high-inrush applications must be assessed using the relevant manufacturer ratings. For the 55.32.9.024.2020, the exact suffix-specific contact construction, indication features and socket compatibility should also be confirmed before installation or substitution.

Typical Applications

• Industrial automation control panels.
• PLC interface and auxiliary switching circuits.
• Machinery control and interlocking systems.
• Building management and automation equipment.
• Electrical control cabinets.
• Equipment status and alarm signalling.
• Process control and monitoring systems.
• Power management and auxiliary control circuits.
• Industrial equipment maintenance and relay replacement.
• OEM electrical control assemblies.