55.14.9.012.0001 Finder Miniature PCB relay 4 pole 7A DC 12V

Why Choose the Finder 55.14.9.012.0001 7 A 4PDT PCB Relay?

The Finder 55.14.9.012.0001 is a versatile 7 A miniature general-purpose electromechanical relay designed for dependable switching in industrial automation, electrical control equipment and PCB-based electronic assemblies. Part of the established Finder 55 Series, this relay combines a 12 V DC coil, four independent changeover contacts and a compact housing for applications requiring multiple switching functions from a single control signal.

Featuring a 4PDT (four-pole double-throw / 4 CO) contact configuration, the Finder 55.14.9.012.0001 offers four separate changeover contact sets, each providing normally open, normally closed and common connections. Its 7 A rated contact current and 250 V AC rated contact voltage make it suitable for appropriately rated industrial control loads, signalling circuits and electrical equipment.

This specific .0001 version features RT III wash-tight protection, silver nickel (AgNi) contacts and PCB through-hole mounting. Its four-pole design is especially useful where several circuits need to be switched simultaneously without installing multiple individual relays. With a nominal 1 W DC coil and a compact construction, the Finder 55.14.9.012.0001 provides a practical solution for automation engineers, electronic equipment designers and OEM manufacturers.

Key Advantages

• Four changeover contacts (4PDT / 4 CO) allow multiple circuits to be controlled from one relay.
• 12 V DC coil for operation from compatible low-voltage DC control supplies.
• 7 A rated contact current for suitably rated industrial switching applications.
• 250 V AC rated contact voltage supports common electrical control applications.
• RT III wash-tight construction provides enhanced protection during compatible PCB manufacturing and cleaning processes.
• Silver nickel (AgNi) contacts offer dependable switching characteristics for general-purpose loads.
• Four independent contact sets support simultaneous switching, signalling and auxiliary control functions.
• PCB through-hole terminals enable direct installation into printed circuit assemblies.
• Compact housing reduces the space required for multi-pole switching.
• 1 W nominal coil consumption provides efficient DC electromagnetic operation.
• Monostable operation automatically returns the contacts to their normal positions when coil power is removed.
• Cadmium-free contact material supports modern electrical equipment design requirements.
• Established Finder 55 Series platform offers a practical solution for OEM production and maintenance applications.

Key Features

• Finder 55 Series miniature general-purpose relay.
• Type 55.14 four-pole PCB relay.
• 12 V DC nominal coil voltage.
• 4 CO / 4PDT contact configuration.
• Four independent changeover contact sets.
• 7 A rated contact current.
• 15 A maximum peak contact current, subject to the manufacturer's specified conditions.
• 250 V AC rated and maximum switching voltage for the 55.14 relay type.
• 1,750 VA rated resistive switching capacity under AC1 conditions.
• 350 VA rated inductive switching capacity under AC15 conditions at 230 V AC.
• Silver nickel (AgNi) contact material.
• 140 Ω nominal coil resistance.
• Approximately 86 mA nominal coil current.
• 1 W nominal DC coil consumption.
• RT III wash-tight environmental protection.
• PCB through-hole mounting.
• 14-pin terminal arrangement.
• Compact 27.7 × 20.7 × 35.8 mm housing.
• −40 to +85 °C operating ambient temperature range.
• Monostable, non-latching electromechanical operation.

Versatile Four-Pole Changeover Switching

The Finder 55.14.9.012.0001 is designed for applications requiring several electrical circuits to change state simultaneously. Its four independent changeover contacts are operated by a single 12 V DC electromagnetic coil, allowing one control signal to operate multiple switching functions.

When the coil is energised, each common contact transfers from its normally closed terminal to its normally open terminal. When the coil supply is removed, all four contact sets return to their normal positions. This arrangement is useful for applications such as auxiliary switching, status signalling, electrical interlocking and the control of multiple low-power or appropriately rated loads.

Unlike a force-guided safety relay, the Finder 55.14.9.012.0001 is a general-purpose electromechanical relay. Its four changeover contacts should not be assumed to provide certified force-guided contact monitoring. Where safety-related switching is required, the complete control architecture and the suitability of the selected components must be assessed against the applicable standards.

RT III Wash-Tight Construction for PCB Applications

A distinguishing feature of the .0001 variant is its RT III wash-tight environmental protection. This construction is intended to provide protection during specified PCB soldering and washing processes, making the relay particularly useful for electronic equipment manufacturers using compatible automated assembly methods.

The relay's PCB through-hole terminals support direct soldering into printed circuit boards, while its compact housing provides four changeover contact sets without requiring four separate relay components. This can simplify circuit layout, reduce component count and make more efficient use of PCB space.

The silver nickel (AgNi) contacts are suitable for a broad range of general-purpose electrical switching applications. Engineers should select the relay according to the actual load characteristics, particularly when switching inductive loads, motors or circuits with high inrush current. The 7 A contact rating applies under specified conditions and should not be interpreted as a universal rating for every load type.

Reliable 12 V DC Coil Operation

The 12 V DC coil makes the Finder 55.14.9.012.0001 suitable for compatible industrial electronic control systems and DC-powered equipment. With a nominal coil resistance of 140 Ω, the relay draws approximately 86 mA at its rated voltage, corresponding to a nominal power consumption of around 1 W.

As a monostable relay, it remains in its energised switching position only while the appropriate coil supply is applied. This provides predictable switching behaviour for general-purpose control circuits. When designing the driving electronics, suitable coil suppression should be considered, as suppression components can influence the relay's release characteristics.

Typical Applications

• Industrial automation and machine control systems.
• PCB-based electrical control assemblies.
• Multi-circuit switching and auxiliary control.
• Industrial equipment status signalling.
• Electrical control panels and automation interfaces.
• Building management and lighting control equipment.
• Heating, ventilation and air conditioning controls.
• Process control and monitoring equipment.
• Electrical interlocking and changeover circuits.
• OEM electronic equipment manufacturing.
• Power management and distribution control.
• Industrial test and measurement equipment.
• Automated machinery and production equipment.
• Replacement of compatible Finder 55.14 PCB relays.