55.12.9.024.2000 Finder Miniature PCB relay 2pole 10A DC 24V

Why Choose the Finder 55.12.9.024.2000 Industrial PCB Relay?

The Finder 55.12.9.024.2000 is a robust 24 V DC industrial electromagnetic relay designed for dependable electrical switching in automation systems, control equipment and printed circuit board assemblies. Part of the established Finder Series 55 range, this general-purpose relay combines a durable construction with two independent changeover contacts, making it suitable for industrial applications requiring flexible control of electrical circuits.

Featuring a double-pole double-throw (DPDT / 2 CO) contact configuration, the Finder 55.12.9.024.2000 provides two separate changeover contact sets operated by a common electromagnetic coil. Each contact set is rated at 10 A at 250 V AC for resistive loads, allowing the relay to switch two appropriately rated circuits or provide combined switching and signalling functions.

Designed for PCB through-hole mounting, the relay features a 24 V DC coil, silver cadmium oxide (AgCdO) contacts and a compact industrial housing. Its monostable operation, straightforward solder-terminal installation and versatile contact arrangement make it a practical solution for OEM machinery, electrical control boards and industrial automation equipment.

Key Advantages

• 24 V DC electromagnetic coil for industrial control applications.
• DPDT / 2 CO contact arrangement provides two independent changeover switching circuits.
• 10 A contact rating at 250 V AC for appropriately rated resistive loads.
• Silver cadmium oxide (AgCdO) contacts for industrial electrical switching.
• PCB through-hole mounting allows direct integration into electronic control assemblies.
• 600 Ω nominal coil resistance supports predictable control circuit design.
• Approximately 1 W coil consumption for conventional industrial relay operation.
• Monostable, non-latching operation provides automatic return when the coil is de-energised.
• Non-polarised DC coil simplifies electrical connection.
• Compact industrial construction for space-conscious electronic equipment.
• Suitable for machinery controls, automation equipment and electrical switching applications.
• Allows switching and auxiliary signalling functions within a single relay.

Key Features

• Finder Series 55.12 general-purpose industrial relay.
• 24 V DC nominal coil voltage.
• Two changeover contacts (DPDT / 2 Form C).
• 10 A rated current per contact set.
• 250 V AC rated contact voltage.
• 600 Ω nominal coil resistance.
• 40 mA nominal coil current.
• Approximately 0.96 W nominal coil power.
• Silver cadmium oxide contact material.
• PCB through-hole solder terminals.
• Non-polarised coil connection.
• Monostable electromagnetic operation.
• RT I dust-protected construction.
• Compact housing measuring approximately 27.7 × 20.7 × 35.8 mm.

Dependable Dual-Contact Switching for Industrial Control Systems

The Finder 55.12.9.024.2000 uses an electromagnetic coil to operate two separate changeover contact sets. When the specified 24 V DC is applied to the coil, both contact sets transfer from their normally closed positions to their normally open positions. When the coil is de-energised, the contacts return to their normal states, providing predictable control of connected electrical circuits.

The DPDT contact configuration allows engineers to switch two independent circuits using one control signal. This is particularly useful for applications requiring simultaneous control of separate loads, combined equipment switching and status signalling, or auxiliary control functions. Each contact set has a 10 A resistive AC rating, although inductive, capacitive and high-inrush loads must be assessed against the manufacturer's applicable switching limits.

The relay's through-hole PCB terminals enable direct integration into electronic control assemblies, while its AgCdO contact material supports industrial switching applications. With a nominal coil resistance of 600 Ω and non-polarised DC operation, the relay can be incorporated into appropriately designed 24 V DC control circuits. Suitable coil suppression, PCB conductor sizing and contact protection should be considered during equipment design.

Typical Applications

• Industrial electronic control boards.
• PLC interface and auxiliary switching circuits.
• OEM machinery and equipment controls.
• Industrial automation and process control systems.
• Electrical control panel PCB assemblies.
• Building automation and HVAC control equipment.
• Motor control and auxiliary signalling circuits.
• Industrial monitoring and instrumentation equipment.
• Dual-circuit switching and electrical interlocking.
• Embedded electronic control systems.
• Industrial power supply and equipment switching circuits.
• Maintenance and replacement of compatible PCB-mounted relays.