48.P6.8.024.1060SPA Finder 1 CO Contacts 24V AC Modular Interface Relay with Green LED + varistor Indication

Why Choose the Finder 48.P6.8.024.1060SPA Interface Relay Module?

The Finder 48.P6.8.024.1060SPA is a compact 16 A industrial electromechanical interface relay module from the Finder 48 Series, designed for dependable switching in PLC systems, electrical control panels and industrial automation equipment. Featuring a 24 V AC operating coil, a single changeover contact and convenient push-in terminals, this relay interface provides an efficient connection between electronic control systems and electrical loads.

The Finder 48.P6 design combines a replaceable electromechanical relay with a slimline DIN rail socket assembly. Its single-pole double-throw (SPDT / 1 CO) contact configuration provides normally open and normally closed switching paths, while the standard silver-nickel (AgNi) contact material supports reliable switching of appropriately rated industrial loads.

With a 16 A rated contact current, 250 V AC rated contact voltage and 15.8 mm module width, the Finder 48.P6.8.024.1060SPA is suitable for space-conscious industrial installations. Its push-in wiring connections, integrated supply indication and EMC coil suppression module simplify panel assembly, operation and maintenance.

Key Advantages

• 16 A industrial interface relay for suitable electrical switching applications.
• 24 V AC nominal coil voltage for compatible industrial control systems.
• Single changeover contact (1 CO / SPDT) provides flexible switching between normally open and normally closed circuits.
• Push-in terminals enable convenient wiring without conventional screw-terminal tightening.
• 15.8 mm slimline construction helps maximise available DIN rail space.
• Silver-nickel (AgNi) contacts provide dependable electrical switching performance.
• 4,000 VA AC1 resistive switching capacity for appropriately rated loads.
• Integrated supply status indication assists with commissioning and troubleshooting.
• EMC coil suppression module helps manage switching transients.
• Replaceable plug-in relay supports straightforward maintenance.
• 35 mm DIN rail mounting for standard industrial control cabinets.
• −40 to +70 °C operating temperature range for a wide variety of installation environments.

Key Features

• Finder 48 Series industrial interface relay module.
• 48.P6 relay interface type with push-in terminals.
• 24 V AC nominal coil voltage, 50/60 Hz.
• 1.2 VA nominal AC coil consumption at 50 Hz.
• 16 A rated contact current.
• 30 A maximum peak contact current.
• Single-pole double-throw (SPDT / 1 CO) contact configuration.
• Silver-nickel (AgNi) standard contact material.
• 250 V AC rated contact voltage.
• 400 V AC maximum switching voltage.
• 4,000 VA rated AC1 resistive switching capacity.
• 1,000 VA rated AC15 switching load at 230 V AC.
• 6 kV coil-to-contact impulse withstand voltage.
• 8 mm coil-to-contact insulation distance.
• Push-in terminal connection system.
• Integrated coil supply indication and EMC suppression.
• IP20 protection category.
• DIN rail mounting in accordance with EN 60715.

Reliable Electrical Switching with Push-In Terminal Technology

The Finder 48.P6.8.024.1060SPA provides an effective interface between a 24 V AC control circuit and a separate electrical switching circuit. When the coil is energised, the relay transfers its common contact from the normally closed position to the normally open position. When the coil supply is removed, the contact returns to its original state, enabling dependable control of connected electrical equipment.

A major benefit of the 48.P6 interface design is its push-in terminal connection system, which supports efficient wiring during control panel manufacture and maintenance. Combined with the slim 15.8 mm housing, this makes the module particularly suitable for densely populated electrical cabinets and industrial automation assemblies.

The Finder 48.P6 relay interface also includes supply status indication and EMC coil suppression as standard. These features assist maintenance personnel with visual monitoring and help limit electrical disturbances associated with coil switching. For applications above 10 A, the manufacturer's specified parallel contact-terminal connections must be followed to achieve the applicable higher-current rating.

Typical Applications

• Industrial automation and PLC interface systems.
• Electrical control panels and DIN rail assemblies.
• Industrial machinery and equipment control.
• Building management and automation systems.
• Heating, ventilation and air conditioning (HVAC) controls.
• Lighting and auxiliary load switching.
• Pump and fan control interfaces.
• Industrial signalling and alarm circuits.
• Electrical interlocking and control logic.
• Power distribution monitoring and auxiliary circuits.
• OEM electrical equipment and industrial machinery.
• Compact control cabinets requiring push-in wiring connections.