Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
48.61.8.230.1060SPA Finder 1 CO Contacts 230V AC Modular Interface Relay with Green LED + diode Indication
Finder 48.61.8.230.1060SPA industrial relay interface module featuring a 230 V AC coil, 16 A SPDT changeover contact, green LED indication, varistor suppression and 15.8 mm DIN rail mounting with screw terminals for industrial automation and electrical control systems.
£16.70
Why Choose the Finder 48.61.8.230.1060SPA Relay Interface Module?
The Finder 48.61.8.230.1060SPA is a compact 16 A electromechanical relay interface module designed for dependable electrical switching in industrial automation, PLC systems and electrical control panels. Part of the Finder 48 Series, this industrial interface relay combines a high-current plug-in relay with a DIN rail mounting socket, providing a convenient solution for switching electrical loads from a separate control circuit.
Featuring a 230 V AC operating coil and one changeover contact (1 CO / SPDT), the Finder 48.61.8.230.1060SPA enables a single control signal to switch between normally closed and normally open connections. Its 16 A rated contact current, 250 V AC rated contact voltage and 4000 VA AC1 switching capacity make it suitable for appropriately rated industrial and commercial electrical loads.
The module features a slim 15.8 mm housing width, box-clamp screw terminals and 35 mm DIN rail mounting. The 1060SPA configuration incorporates a supply indication and suppression arrangement, while the replaceable relay design simplifies maintenance. Its combination of compact dimensions, high-current switching capability and convenient installation makes it a practical choice for panel builders, automation engineers and industrial maintenance professionals.
Key Advantages
- 16 A industrial relay interface module for demanding electrical control applications.
- 230 V AC nominal coil voltage for compatible mains-voltage control circuits.
- Single changeover contact (SPDT) supports flexible electrical switching.
- 250 V AC rated contact voltage for suitable industrial electrical loads.
- 4000 VA AC1 switching capacity for compatible resistive loads.
- 30 A maximum peak contact current under specified operating conditions.
- Silver nickel (AgNi) contact material for dependable electromechanical switching.
- 15.8 mm slimline construction conserves valuable control panel space.
- 35 mm DIN rail mounting simplifies installation.
- Box-clamp screw terminals provide convenient field wiring.
- Green LED supply indication and varistor suppression assist maintenance and control circuit protection.
- Replaceable plug-in relay allows straightforward servicing without replacing the complete interface assembly.
Key Features
- Finder 48 Series industrial relay interface module.
- 48.61 single-pole relay interface platform.
- 230 V AC nominal operating coil.
- 50/60 Hz AC coil operation.
- 1 CO (SPDT / 1 Form C) contact configuration.
- 16 A rated contact current.
- 30 A maximum peak contact current.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4000 VA AC1 switching capacity.
- 1000 VA AC15 switching capacity at 230 V AC.
- Silver nickel (AgNi) contact material.
- Green LED supply status indication.
- Varistor-based coil suppression.
- 15.8 mm module width.
- 35 mm DIN rail mounting.
- Box-clamp screw-terminal connections.
- Removable plug-in relay for convenient maintenance.
- IP20 protection category.
- Suitable for industrial automation, PLC interfacing and auxiliary switching applications.
Reliable 230 V AC Relay Interfacing for Industrial Control Systems
The Finder 48.61.8.230.1060SPA operates using an electromagnetic relay mechanism. When the 230 V AC coil is energised, the relay transfers its changeover contact from the normally closed terminal to the normally open terminal. When the control supply is removed, the contact automatically returns to its original position, providing straightforward non-latching switching operation.
The single changeover contact configuration provides common, normally open and normally closed connections for control logic, auxiliary switching and electrical load management. With a 16 A rated contact current, the module can handle compatible higher-current loads while occupying relatively little DIN rail space. For switching currents above 10 A, Finder specifies parallel connection of the appropriate contact terminals, including terminals 21 with 11, 24 with 14 and 22 with 12.
The integrated green LED supply indication provides convenient visual confirmation of the control input, while the varistor suppression arrangement helps limit switching-related voltage transients. Its plug-in construction allows the relay to be replaced independently of the socket, reducing maintenance effort. As with any industrial relay, the load type, inrush current, electrical clearances and applicable wiring requirements should be checked before installation.
Typical Applications
- Industrial automation and PLC interface circuits.
- Electrical control panels and DIN rail assemblies.
- Machinery control and auxiliary switching systems.
- Industrial equipment using 230 V AC control supplies.
- Electrical load switching and equipment enable circuits.
- Motor starter and contactor control interfaces.
- Building automation and facilities management systems.
- Heating, ventilation and air conditioning control equipment.
- Industrial alarm, indication and monitoring circuits.
- Electrical distribution and control cabinets.
- OEM machinery and electrical equipment manufacturing.
- Maintenance and replacement of compatible Finder 48 Series relay interface modules.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Interface Relay | |
|---|---|---|
| Terminal Type | Screw | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | DIN rail | |
| Manufacturer | Finder | |
| Series | Finder 48 Series | |
| Manufacturer part number | 48.61.8.230.1060SPA | |
| Alternative compact part number | 486182301060SPA | |
| Product type | Electromechanical relay interface module | |
| Interface module type | 48.61 | |
| Relay operation | Monostable, non-latching | |
| Contact configuration | 1 CO (SPDT / 1 Form C) | |
| Number of contact poles | 1 | |
| Nominal coil voltage | 230 V AC | |
| Coil supply type | AC | |
| Nominal coil frequency | 50/60 Hz | |
| AC coil operating voltage range | 184 to 253 V AC | |
| Nominal AC coil consumption | 1.2 VA | |
| Rated contact current | 16 A | |
| Maximum peak contact current | 30 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated AC1 switching capacity | 4000 VA | |
| Rated AC15 switching capacity | 1000 VA at 230 V AC | |
| Single-phase motor rating | 0.55 kW at 230 V AC | |
| DC1 breaking capacity | 16 A at 24 V DC | |
| Minimum switching load | 500 mW (10 V / 5 mA) | |
| Contact material | Silver nickel (AgNi) | |
| Electrical endurance | 100,000 cycles at rated AC1 load | |
| Mechanical endurance | Up to 10 million cycles under specified AC coil conditions | |
| Coil-to-contact impulse withstand voltage | 6 kV | |
| Coil-to-contact insulation distance | 8 mm | |
| Dielectric strength between open contacts | 1000 V AC | |
| Ambient operating temperature | −40 to +70 °C | |
| Protection category | IP20 | |
| Mounting type | 35 mm DIN rail, EN 60715 | |
| Terminal type | Box-clamp screw terminals | |
| Module width | 15.8 mm | |
| Supply status indication | Green LED | |
| Coil suppression | Varistor | |
| Relay replacement | Removable plug-in relay | |
| Ordering configuration | 1060SPA | |
| Application category | Industrial automation and electrical control |
Frequently Asked Questions
What is the Finder 48.61.8.230.1060SPA used for?
The Finder 48.61.8.230.1060SPA is an industrial electromechanical relay interface module used for electrical switching in automation systems, machinery and control panels. It features a 230 V AC operating coil and a single 16 A changeover contact.
What coil voltage does the Finder 48.61.8.230.1060SPA require?
The module uses a 230 V AC nominal operating coil designed for 50/60 Hz control supplies. The specified AC coil operating voltage range is 184 to 253 V AC.
What is the contact configuration and current rating?
The Finder 48.61.8.230.1060SPA features a single changeover contact (1 CO / SPDT) rated at 16 A, with a 250 V AC rated contact voltage and 4000 VA AC1 switching capacity. For currents above 10 A, the appropriate contact terminals must be connected in parallel according to Finder's instructions.
Can the Finder 48.61.8.230.1060SPA be mounted on a DIN rail?
Yes. The Finder 48.61.8.230.1060SPA is designed for 35 mm DIN rail mounting in accordance with EN 60715. It has a 15.8 mm housing width and box-clamp screw terminals for convenient installation in industrial electrical control panels.
Does the Finder 48.61.8.230.1060SPA include LED indication and coil suppression?
Yes. The 230 V AC 48.61 interface configuration incorporates a green LED supply indicator and varistor suppression. The LED provides visual indication of the control supply, while the varistor helps manage coil switching transients.
Trusted by Industrial Automation Professionals Worldwide
Finder 48 Series relay interface modules provide compact and serviceable switching solutions for industrial automation, electrical control panels and machinery. The Finder 48.61.8.230.1060SPA combines a 230 V AC operating coil, 16 A changeover contact, LED indication, varistor suppression and slim DIN rail mounting for dependable industrial electrical control.
