Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
41.52.9.012.5010 Finder Miniature PCB relay 2pole 8A DC 12V
Finder 41.52.9.012.5010 is a low-profile PCB relay with a 12 V DC coil, two changeover gold-plated AgNi contacts and an 8 A rated contact current for industrial control and automation equipment.
Why Choose the Finder 41.52.9.012.5010 Low-Profile PCB Relay?
The Finder 41.52.9.012.5010 is a compact and dependable low-profile printed circuit board relay designed for switching electrical loads in industrial control, automation and electronic equipment. As part of the Finder 41 Series, it combines a space-saving profile with reliable twin-pole electromechanical switching.
This monostable relay provides two changeover contacts, enabling each pole to switch between normally closed and normally open circuits. Its AgNi contacts feature gold plating for reliable switching, while the RT II flux-proof enclosure supports automated printed circuit board assembly.
With a 12 V DC coil, 2 changeover contacts and an 8 A rated contact current, the 41.52.9.012.5010 is well suited to control boards, interface modules and automated equipment requiring compact, flexible switching of two circuits.
Key Advantages
- Compact low-profile relay designed for PCB applications.
- Two changeover contacts provide flexible twin-pole switching.
- 8 A rated contact current for industrial and electronic loads.
- 12 V DC coil for low-voltage control systems.
- Gold-plated AgNi contacts support dependable switching performance.
- RT II flux-proof construction supports automated PCB assembly.
Key Features
- Finder 41 Series low-profile PCB relay.
- 2 CO contact configuration.
- 8 A rated contact current.
- 12 V DC nominal coil voltage.
- AgNi contacts with gold plating.
- 5 mm contact pin pitch.
- Monostable electromechanical operation.
- Flux-proof enclosure classified as RT II.
Reliable Switching for Compact Control Equipment
Electromechanical PCB relays such as the Finder 41.52 provide galvanic isolation between low-voltage control electronics and the circuits being switched. Energising the coil transfers both changeover contacts, allowing a controller or interface board to operate two independent circuits.
The low-profile Finder 41 Series is designed for applications where board space and component height are important. Its twin changeover contacts, PCB terminals and flux-proof construction make this relay suitable for automated assembly and dependable operation in industrial electronic systems.
Typical Applications
- Industrial control and automation equipment.
- Printed circuit boards and electronic control modules.
- Programmable controller interfaces.
- Heating, ventilation and air-conditioning controls.
- Electrical panels and interface modules.
- Machine control and building automation systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | PCB Relay | |
|---|---|---|
| Mounting Type | PCB | |
| Switching Current (A) | 8 A | |
| Load Voltage | 400 V AC | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 41 Series | |
| Model | 41.52.9.012.5010 | |
| Product type | Low-profile PCB relay | |
| Contact configuration | 2 CO / DPDT | |
| Rated contact current | 8 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC / 220 V DC | |
| Nominal coil voltage | 12 V DC | |
| Rated coil power | 0.4 W | |
| Coil current | 33.3 mA | |
| Coil resistance | 360 Ω | |
| Contact material | AgNi with gold plating | |
| Coil type | DC monostable | |
| Mounting type | Direct PCB mounting | |
| Contact pin pitch | 5 mm | |
| Protection category | RT II, flux proof | |
| Dimensions (L × W × H) | 29 × 12.6 × 15.7 mm |
Frequently Asked Questions
What is the Finder 41.52.9.012.5010 used for?
This relay enables a low-voltage control circuit to switch two changeover circuits in industrial automation, control and electronic equipment.
What coil voltage does this relay require?
The Finder 41.52.9.012.5010 has a nominal coil voltage of 12 V DC.
What contact configuration does this relay provide?
This model provides two changeover contacts, also described as DPDT or 2 Form C.
What is the rated contact current?
The relay has a rated contact current of 8 A.
What contact material does this relay use?
The relay uses AgNi contacts with gold plating to support dependable switching performance.
Trusted by Control and Automation Professionals
Finder 41 Series relays are designed to provide compact and dependable switching for printed circuit boards, industrial controllers and automated equipment.
