Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
41.52.9.012.0011 Finder Miniature PCB relay 2pole 8A DC 12V
Finder 41.52.9.012.0011 is a wash-tight low-profile PCB relay with a 12 V DC coil, two changeover AgNi contacts and an 8 A rated contact current for industrial control and automation equipment.
£5.36
Why Choose the Finder 41.52.9.012.0011 Low-Profile PCB Relay?
The Finder 41.52.9.012.0011 is a compact and dependable low-profile printed circuit board relay designed for switching electrical loads in industrial control, automation and electronic equipment. As part of the Finder 41 Series, it combines a space-saving profile with reliable twin-pole electromechanical switching.
This monostable relay provides two changeover contacts, enabling each pole to switch between normally closed and normally open circuits. It is suitable for direct PCB mounting or installation through a compatible Finder socket, while its wash-tight RT III enclosure supports compatible printed circuit board cleaning processes.
With a 12 V DC coil, 2 changeover contacts and an 8 A rated contact current, the 41.52.9.012.0011 is well suited to control boards, interface modules and automated equipment requiring compact, flexible switching of two circuits.
Key Advantages
- Compact low-profile relay designed for PCB applications.
- Two changeover contacts provide flexible twin-pole switching.
- 8 A rated contact current for industrial and electronic loads.
- 12 V DC coil for low-voltage control systems.
- Direct PCB or compatible socket mounting provides installation flexibility.
- Wash-tight RT III enclosure supports compatible PCB washing processes.
Key Features
- Finder 41 Series low-profile PCB relay.
- 2 CO contact configuration.
- 8 A rated contact current.
- 12 V DC nominal coil voltage.
- AgNi contact material.
- 5 mm contact pin pitch.
- Monostable electromechanical operation.
- Wash-tight enclosure classified as RT III.
Reliable Switching for Compact Control Equipment
Electromechanical PCB relays such as the Finder 41.52 provide galvanic isolation between low-voltage control electronics and the circuits being switched. Energising the coil transfers both changeover contacts, allowing a controller or interface board to operate two independent circuits.
The low-profile Finder 41 Series is designed for applications where board space and component height are important. Its twin changeover contacts, PCB-compatible terminals and wash-tight construction make this relay suitable for automated assembly and dependable operation in industrial electronic systems.
Typical Applications
- Industrial control and automation equipment.
- Printed circuit boards and electronic control modules.
- Programmable controller interfaces.
- Heating, ventilation and air-conditioning controls.
- Electrical panels and interface modules.
- Machine control and building automation systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | PCB Relay | |
|---|---|---|
| Mounting Type | PCB, Plug-in socket | |
| Load Voltage | 400 V AC | |
| Switching Current (A) | 8 A | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 41 Series | |
| Model | 41.52.9.012.0011 | |
| Product type | Low-profile PCB relay | |
| Contact configuration | 2 CO / DPDT | |
| Rated contact current | 8 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC / 220 V DC | |
| Nominal coil voltage | 12 V DC | |
| Rated coil power | 0.4 W | |
| Coil resistance | 360 Ω | |
| Contact material | AgNi | |
| Coil type | DC monostable | |
| Operate time | 8 ms | |
| Release time | 6 ms | |
| Mounting type | Direct PCB or compatible socket mounting | |
| Contact pin pitch | 5 mm | |
| Protection category | RT III, wash tight | |
| Operating temperature | -40 to +85 °C | |
| Dimensions (L × W × H) | 29 × 12.6 × 15.7 mm |
Frequently Asked Questions
What is the Finder 41.52.9.012.0011 used for?
This relay enables a low-voltage control circuit to switch two changeover circuits in industrial automation, control and electronic equipment.
What coil voltage does this relay require?
The Finder 41.52.9.012.0011 has a nominal coil voltage of 12 V DC.
What contact configuration does this relay provide?
This model provides two changeover contacts, also described as DPDT or 2 Form C.
What is the rated contact current?
The relay has a rated contact current of 8 A.
What does the RT III protection category mean?
RT III identifies a wash-tight relay enclosure designed to withstand compatible printed circuit board washing processes.
Trusted by Control and Automation Professionals
Finder 41 Series relays are designed to provide compact and dependable switching for printed circuit boards, industrial controllers and automated equipment.
