Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 40.61.8.230.1000 is a 16 A Series 40 miniature electromechanical power relay featuring a 230 V AC coil, one SPDT changeover contact, AgNi contact material and RT II flux-proof construction for PCB or compatible socket mounting in industrial control applications.
The Finder 40.61.8.230.1000 is a compact 16 A miniature electromechanical power relay designed for industrial automation, electrical control panels and general-purpose load switching. Part of the established Finder Series 40, this relay features a 230 V AC coil and a single changeover contact, making it suitable for applications requiring an AC-operated switching device.
With one changeover contact (SPDT / 1 CO), a 16 A rated contact current and silver nickel (AgNi) contact material, the Finder 40.61.8.230.1000 provides versatile switching for compatible electrical loads. Its 250 V AC rated contact voltage and 4000 VA AC1 switching capacity make it a practical option for resistive-load switching and industrial control applications, subject to the manufacturer's operating limits.
The relay features a compact 12.4 × 29 × 25 mm nominal housing, 5 mm contact pin pitch and RT II flux-proof construction. It can be installed directly on a suitable printed circuit board or used with a compatible Finder Series 95 socket, providing flexibility for original equipment manufacturers, control panel builders and maintenance engineers.
The Finder 40.61.8.230.1000 uses an electromagnetic coil designed for a 230 V AC control supply. When the specified AC voltage is applied, the relay energises and transfers its common contact from the normally closed terminal to the normally open terminal. When the coil supply is removed, the relay returns to its normal, de-energised position.
Its 16 A changeover contact provides a separate switching path for compatible electrical loads. The AgNi contact material offers dependable general-purpose switching characteristics, while the 4000 VA AC1 rating indicates the relay's capacity for suitable resistive AC loads. Inductive, capacitive and high-inrush loads may require different switching limits.
The compact Series 40.61 PCB/plug-in format allows the relay to be soldered directly onto a suitable printed circuit board or installed in an appropriately rated socket. The RT II flux-proof housing is intended to help protect the relay during suitable soldering processes. It should not be treated as a wash-tight or waterproof enclosure.
When specifying the relay for motor circuits, transformers, contactor control, LED drivers or other electrical loads, engineers should consider the load's inrush current, utilisation category and switching frequency. The selected socket, PCB tracks, wiring and protective devices must also be rated for the intended application. Because this relay has a 230 V AC coil, installation and maintenance should be carried out by suitably competent personnel using appropriate electrical isolation procedures.
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Switching Current (A) | 16 A | |
| Manufacturer | Finder | |
| Series | Series 40 | |
| Type | 40.61 | |
| Manufacturer part number | 40.61.8.230.1000 | |
| Product type | Miniature electromechanical power relay | |
| Relay technology | Electromechanical | |
| Relay operation | Monostable, non-latching | |
| Nominal coil voltage | 230 V AC | |
| Coil supply frequency | 50/60 Hz | |
| Nominal coil consumption | 1.2 VA | |
| Nominal coil resistance | 28 kΩ | |
| Nominal coil current | Approximately 5 mA | |
| Contact configuration | 1 changeover (SPDT / 1 CO / 1 Form C) | |
| Number of poles | 1 | |
| Rated contact current | 16 A | |
| Maximum peak contact current | 30 A under specified conditions | |
| Rated contact voltage | 250 V AC | |
| Maximum AC switching voltage | 400 V AC | |
| Rated AC1 switching capacity | 4000 VA | |
| Rated AC15 switching capacity at 230 V AC | 1000 VA | |
| Single-phase motor rating at 230 V AC | 0.55 kW | |
| Contact material | Silver nickel (AgNi) | |
| Minimum switching load | 500 mW (10 V / 5 mA) | |
| Operate time | Approximately 7 ms | |
| Release time | Approximately 3 ms | |
| Contact pin pitch | 5 mm | |
| Mounting format | PCB through-hole or compatible relay socket | |
| Compatible socket family | Suitable Finder Series 95 sockets | |
| Nominal body dimensions | 12.4 × 29 × 25 mm | |
| Environmental protection category | RT II (flux-proof) | |
| Operating temperature | -40 to +85 °C under specified conditions | |
| Primary application | AC control circuit interfacing and electrical load switching |
The Finder 40.61.8.230.1000 is a 16 A miniature electromechanical power relay designed for switching compatible electrical loads in industrial automation, machinery and electrical control systems. Its single changeover contact provides flexible switching from a 230 V AC control circuit.
The relay features a 230 V AC coil designed for 50/60 Hz supplies, with a nominal consumption of 1.2 VA and nominal resistance of 28 kΩ. It must be connected to a compatible AC control supply.
The Finder 40.61.8.230.1000 has one changeover contact (SPDT / 1 CO) rated at 16 A and 250 V AC, with a maximum AC switching voltage of 400 V AC. The permissible load depends on the utilisation category and operating conditions.
The Finder 40.61.8.230.1000 uses silver nickel (AgNi) contacts and has RT II flux-proof construction. The contact material supports general-purpose electromechanical switching, while the flux-proof housing is intended for suitable PCB soldering processes rather than washing or continuous exposure to water.
No. The Finder 40.61.8.230.1000 is a monostable, non-latching relay that returns to its normal contact position when coil power is removed. It can be mounted directly on a suitable PCB or installed in a compatible Finder Series 95 relay socket.
Finder Series 40 miniature power relays provide compact electromechanical switching solutions for industrial automation, machinery and electrical control equipment. With its 230 V AC coil, 16 A changeover contact, AgNi contact material and RT II flux-proof construction, the Finder 40.61.8.230.1000 offers a practical solution for engineers, control panel builders and maintenance professionals requiring reliable AC-operated switching.
Technical references: Specifications are based on the Finder Series 40 technical datasheet and exact-part listings from SOS electronic and RS. Confirm the latest manufacturer documentation and the applicable load category before final equipment specification.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.