Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 40.61.7.012.1321 miniature electromechanical power relay featuring a 12 V DC coil, 16 A SPDT changeover contact and compact PCB-compatible construction for industrial automation and electrical switching applications.
The Finder 40.61.7.012.1321 is a compact 16 A miniature electromechanical power relay designed for electrical switching, industrial automation and electronic control applications. Part of the Finder 40 Series, this relay combines a 12 V DC coil with a single changeover contact, providing a practical switching solution for electronic equipment, control circuits and industrial machinery.
The Finder 40.61.7.012.1321 uses an electromechanical switching mechanism to operate an electrically separate load circuit from a low-voltage control signal. Its single-pole double-throw (SPDT) contact arrangement provides both normally open and normally closed switching functions, allowing engineers to accommodate different control requirements within a compact relay footprint.
With a 16 A rated contact current, 250 V AC rated contact voltage and compact PCB-compatible construction, this relay is suitable for appropriately rated industrial and electronic switching applications. Its combination of low-voltage control and power switching capability makes it a useful component for OEM equipment manufacturers, automation engineers and electronic control system designers.
The Finder 40.61.7.012.1321 provides an effective interface between low-voltage control electronics and electrical switching circuits. By energising the relay's 12 V DC coil, a compatible controller can operate the changeover contact and switch an appropriately rated external load. This arrangement is useful where a control circuit needs to operate equipment using an electrically separate contact circuit.
The relay's SPDT contact arrangement allows the connected circuit to use either the normally open or normally closed contact path. In a conventional monostable application, the relay changes contact position when the coil is energised and returns to its normal position when coil power is removed. This makes it suitable for equipment control, auxiliary switching and automation functions requiring predictable contact operation.
As part of the Finder 40 Series, the 40.61.7.012.1321 offers a compact solution for electronic assemblies and industrial equipment. Its 16 A contact rating provides flexibility for suitable power switching applications, while the low-voltage coil supports integration with electronic controllers, interface circuits and other automation devices.
For reliable installation, engineers should ensure that the coil driver provides the required operating voltage and current. Contact loads must be evaluated according to their electrical characteristics, particularly when switching inductive equipment, motors or loads with high inrush currents. Appropriate suppression and circuit protection should be incorporated where necessary.
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Switching Current (A) | 16 A | |
| Manufacturer | Finder | |
| Series | 40 Series | |
| Model | 40.61.7.012.1321 | |
| Product type | Miniature electromechanical power relay | |
| Relay type | 40.61 | |
| Nominal coil voltage | 12 V DC | |
| Coil supply type | DC | |
| Contact configuration | 1 CO / SPDT | |
| Number of changeover contacts | 1 | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Contact operation | Electromechanical | |
| Operating configuration | Monostable / non-latching | |
| Mounting format | PCB-compatible relay | |
| Product family | Miniature PCB and plug-in power relays | |
| Manufacturer part number | 40.61.7.012.1321 |
The Finder 40.61.7.012.1321 is a miniature electromechanical power relay used for switching electrical loads and control circuits in industrial automation, electronic equipment, PCB assemblies and OEM machinery.
The Finder 40.61.7.012.1321 features a 12 V DC nominal coil. It must be operated using a compatible DC control circuit capable of supplying the required coil voltage and current.
The relay has a 16 A rated contact current and a 250 V AC rated contact voltage. Actual permissible switching loads depend on the load type, switching conditions and applicable relay ratings.
No. The Finder 40.61.7.012.1321 is a monostable electromechanical relay. Its changeover contact operates when the coil is energised and returns to its normal position when coil power is removed.
Yes. The relay's 12 V DC coil, 16 A changeover contact and compact PCB-compatible format make it suitable for industrial automation, auxiliary switching and OEM equipment when the electrical requirements of the application are within the relay's specified ratings.
Finder 40 Series miniature relays are designed to provide dependable electrical switching for industrial automation, electronic control systems and OEM equipment. The Finder 40.61.7.012.1321 combines a 12 V DC coil, 16 A changeover contact and compact PCB-compatible construction to support reliable switching in modern electrical and electronic applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.