Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
40.31.9.021.0001 Finder Miniature PCB relay 1pole 10A DC 21V
Finder 40.31.9.021.0001 is an RT III wash-tight miniature PCB and plug-in relay with a 21 V DC coil and a 10 A SPDT silver-nickel changeover contact.
Why Choose the Finder 40.31.9.021.0001 Wash-Tight Miniature PCB Relay?
The Finder 40.31.9.021.0001 is a compact and dependable wash-tight miniature electromechanical PCB relay designed for switching electrical loads in industrial automation, electronic equipment and control systems. As part of the established Finder Series 40, it combines a standard DC coil with a single changeover contact in a space-saving PCB and plug-in format.
This monostable relay provides one changeover contact rated at 10 A, allowing a control circuit to switch between normally closed and normally open paths. Its silver-nickel contact material provides dependable switching performance, while reinforced insulation between the coil and contacts supports safe integration into industrial and electronic equipment.
With a 21 V DC coil, an RT III wash-tight enclosure and compact dimensions of 12.4 × 29 × 25 mm, the Finder 40.31.9.021.0001 is well suited to printed circuit board assemblies that undergo compatible cleaning processes. It can be mounted directly onto a PCB or installed through a compatible Finder Series 95 socket.
Key Advantages
- Compact miniature relay for PCB and socket installation.
- RT III wash-tight construction supports compatible PCB cleaning processes.
- 10 A single changeover contact provides flexible circuit control.
- 21 V DC coil suits equipment using this specific control voltage.
- Silver-nickel contacts provide dependable electrical performance.
- Reinforced coil-to-contact insulation supports safe equipment integration.
Key Features
- Finder Series 40 miniature electromechanical relay.
- SPDT / 1 Form C contact configuration.
- 10 A rated contact current.
- 21 V DC standard coil.
- 700 Ω coil resistance.
- Silver-nickel contact material.
- RT III wash-tight environmental protection.
- Suitable for direct PCB mounting or use with a compatible Series 95 socket.
Reliable Switching for Electronic and Control Equipment
Electromechanical relays allow a low-power control signal to operate an electrically isolated load circuit. The changeover contact can direct the switched circuit between normally closed and normally open paths, providing flexible control for signalling, interlocking and automation functions.
The RT III enclosure fitted to this Finder Series 40 relay provides wash-tight protection for compatible printed circuit board production processes. Its compact construction, standard DC coil and reinforced insulation make it suitable for dependable switching within industrial and electronic equipment.
Typical Applications
- Industrial automation and PLC interface circuits.
- Electronic control boards and embedded equipment.
- Heating, ventilation and air-conditioning controls.
- Lighting and electrical switching systems.
- Machine controls and production equipment.
- Domestic appliance and building automation circuits.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Mounting Type | PCB, Plug-in socket | |
| Load Voltage | 400 V AC | |
| Switching Current (A) | 10 A | |
| Coil / Supply Voltage | 21 V DC | |
| Contacts | 1 C/O | |
| Manufacturer | Finder | |
| Series | 40 Series | |
| Model | 40.31.9.021.0001 | |
| Product type | Wash-tight miniature PCB / plug-in electromechanical relay | |
| Relay operation | Monostable | |
| Contact configuration | SPDT / 1 Form C | |
| Number of poles | 1 | |
| Rated contact current | 10 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Coil voltage | 21 V DC | |
| Coil type | Standard DC coil | |
| Coil resistance | 700 Ω | |
| Contact material | Silver nickel | |
| Contact pin pitch | 3.5 mm | |
| Mounting type | PCB or compatible socket | |
| Environmental protection | RT III wash tight | |
| Coil-to-contact impulse withstand voltage | 6 kV | |
| Coil-to-contact creepage and clearance | 8 mm | |
| Dimensions (W × L × H) | 12.4 × 29 × 25 mm |
Frequently Asked Questions
What is the Finder 40.31.9.021.0001 used for?
This relay provides electrically isolated switching for automation equipment, electronic control boards and industrial machinery.
What coil voltage does this relay require?
The Finder 40.31.9.021.0001 is designed for a 21 V DC coil supply.
What contact configuration does the relay provide?
The relay provides one SPDT changeover contact, also described as a 1 Form C configuration.
What does the RT III wash-tight rating mean?
The RT III enclosure classification identifies the relay as wash tight, providing additional protection during compatible printed circuit board cleaning processes.
How can the Finder 40.31.9.021.0001 be mounted?
The relay can be mounted directly onto a printed circuit board or installed through a compatible Finder Series 95 socket.
Trusted for Industrial Switching Worldwide
Finder miniature relays are used by electronic designers, automation engineers and equipment manufacturers to provide dependable switching within compact control and power circuits.
