Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
38.51.7.060.0050 Finder Modular Relay (EMR) 1pole 6A DC 60V
Finder 38.51.7.060.0050 is a 6.2 mm electromechanical relay interface module with a 60 V DC input, one 6 A changeover contact and screw terminals.
Why Choose the Finder 38.51.7.060.0050 Relay Interface Module?
The Finder 38.51.7.060.0050 is a slim and dependable electromechanical relay interface module designed to isolate and interface electronic controllers with industrial field equipment. As part of the Finder Series 38, it combines a sensitive DC input, one changeover contact and screw terminals in a compact module suitable for PLC and automation systems.
The module incorporates voltage-presence indication and input protection to simplify commissioning and operational monitoring. Its replaceable electromechanical relay is secured by a plastic retaining and release clip, allowing convenient removal during servicing while maintaining reliable retention in operation.
With a 60 V DC input and one changeover contact rated at 6 A and 250 V AC, the 38.51.7.060.0050 is suitable for controlling compatible contactors, solenoid valves, indicators and other electrical loads. Its 6.2 mm width and direct DIN rail mounting conserve space inside densely populated control panels.
Key Advantages
- Slim electromechanical relay interface module for PLC systems.
- 6 A changeover contact supports flexible load switching.
- Sensitive 60 V DC input for compatible control circuits.
- Integrated voltage-presence indication and input protection.
- Replaceable relay simplifies servicing and maintenance.
- Only 6.2 mm wide for high-density panel installation.
Key Features
- Finder Series 38 relay interface module.
- Single changeover contact.
- 6 A nominal contact current.
- 60 V DC sensitive input.
- AgNi contact material.
- Screw-terminal connections.
- Plastic retaining and release clip for relay removal.
- Direct mounting on a 35 mm DIN rail.
Reliable Electromechanical Interfacing for Automation Systems
Electromechanical relay interface modules enable electronic controllers to switch and isolate compatible AC or DC field loads. A changeover contact provides normally open and normally closed switching paths, supporting a wide variety of industrial control functions.
The Finder Series 38 is designed for interfacing PLCs and electronic systems with industrial equipment. Its slim modular construction, integrated indication, replaceable relay and DIN rail mounting make it well suited to automation panels where reliability and efficient use of space are essential.
Typical Applications
- PLC input and output interfaces.
- Industrial automation control panels.
- Packaging and labelling machinery.
- Traffic-control systems.
- Solenoid valve and contactor control.
- Electrical distribution and process-control panels.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Interface Relay | |
|---|---|---|
| Terminal Type | Screw | |
| Load Voltage | 400 V AC | |
| Mounting Type | DIN rail | |
| Switching Current (A) | 6 A | |
| Contacts | 1 C/O | |
| IP Rating | IP20 | |
| Manufacturer | Finder | |
| Series | Series 38 | |
| Model | 38.51.7.060.0050 | |
| Product type | Electromechanical relay interface module | |
| Contact configuration | 1 changeover contact | |
| Rated contact current | 6 A | |
| Maximum peak current | 10 A | |
| Rated switching voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 1500 VA | |
| Rated load AC15 at 230 V AC | 300 VA | |
| Single-phase motor rating at 230 V AC | 0.185 kW | |
| DC1 breaking capacity at 24 / 110 / 220 V | 6 / 0.2 / 0.12 A | |
| Minimum switching load | 500 mW at 12 V / 10 mA | |
| Contact material | AgNi | |
| Nominal input voltage | 60 V DC | |
| Input operating range | 48–72 V DC | |
| Nominal input current | 7 mA | |
| Rated input power | 0.4 W | |
| Mechanical life | 10,000,000 cycles | |
| Electrical life at rated AC1 load | 60,000 cycles | |
| Operate / release time | 5 / 6 ms | |
| Coil-to-contact impulse withstand voltage | 6 kV | |
| Dielectric strength between open contacts | 1000 V AC | |
| Ambient temperature | −40 to +70 °C | |
| Protection rating | IP20 | |
| Terminal type | Screw terminals | |
| Mounting type | 35 mm DIN rail mounting | |
| Width | 6.2 mm |
Frequently Asked Questions
What is the Finder 38.51.7.060.0050 used for?
This relay interface module isolates and interfaces PLCs or electronic controllers with compatible industrial field loads.
What contact configuration does this module provide?
The module provides one changeover contact rated at 6 A and 250 V AC.
What input voltage does the module require?
The Finder 38.51.7.060.0050 has a nominal 60 V DC input with an operating range of 48–72 V DC.
Can the relay be replaced?
Yes. The electromechanical relay can be removed using the module’s plastic retaining and release clip, simplifying servicing and replacement.
How is the Finder 38.51.7.060.0050 installed?
The module mounts directly onto a standard 35 mm DIN rail and uses screw terminals for electrical connections.
Trusted by Automation Professionals Worldwide
Finder Series 38 relay interface modules are used by automation engineers and control-panel builders for compact, dependable interfacing between electronic control systems and industrial field equipment.
