Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
2TAZ311000R2061 ABB E297-16-10/8 Installation Relay 1NO 16 A 8 V AC
ABB E297-16-10/8 monostable installation relay with one normally open contact, 16 A rated current, 250 V AC contact rating and an 8 V AC control coil for building and electrical control applications.
£30.95
Why Choose the ABB E297-16-10/8 Installation Relay?
The ABB E297-16-10/8 is a compact and reliable monostable installation relay designed for switching electrical loads in building control, distribution and automation applications. As part of the ABB E297 installation relay series, it combines a 16 A rated switching current with a single normally open contact and an 8 V AC control coil.
This electromechanical relay is operated by a continuous control signal and is designed for low switching noise and low power loss. Its modular construction allows straightforward integration into electrical distribution boards and control panels, while screw terminals provide secure connections for power and control wiring.
With a 16 A rated current, 250 V AC rated contact voltage and 8 V AC coil control voltage, the E297-16-10/8 provides dependable switching for lighting and other electrical loads. Its compact 18 mm width occupies only one DIN module, helping conserve valuable installation space.
Key Advantages
- Compact monostable installation relay for electrical control applications.
- 16 A rated current for dependable load switching.
- Single normally open (1NO) contact configuration.
- 8 V AC control coil for low-voltage control circuits.
- Low-noise coil design suited to building and control installations.
- Only 18 mm wide for space-efficient DIN rail mounting.
Key Features
- ABB E297 installation relay series.
- 16 A rated switching current.
- 250 V AC rated contact voltage.
- 1NO normally open contact.
- 8 V AC rated control voltage.
- 50–60 Hz rated frequency.
- DIN rail mounting with screw-terminal connections.
- Low power loss and low switching noise.
Reliable Switching for Electrical Control Systems
Installation relays such as the ABB E297 provide electrically controlled switching between a low-voltage control circuit and connected electrical loads. The E297-16-10/8 uses an 8 V AC coil to operate its normally open contact, allowing remote control of lighting and other loads from compatible control equipment.
The E297 series is designed for compact modular installations where reliable switching, low coil noise and efficient use of panel space are important. DIN rail mounting and an 18 mm module width make the relay particularly convenient for integration into distribution boards, building controls and electrical automation systems.
Typical Applications
- Building electrical control systems.
- Lighting switching and control circuits.
- Electrical distribution boards.
- Industrial and commercial control panels.
- Remote load switching applications.
- DIN rail mounted automation and control systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Latching / Impulse Relay | |
|---|---|---|
| Terminal Type | Screw | |
| Mounting Type | DIN rail | |
| Switching Current (A) | 16 A | |
| Series | E297 Installation Relays | |
| ABB order code | 2TAZ311000R2061 | |
| Product group | Protection & Control | |
| Product type | Monostable installation relay | |
| Contact configuration | 1NO | |
| Rated current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Rated control voltage | 8 V AC | |
| Control supply voltage range | 7.2–8.8 V AC | |
| Rated frequency | 50–60 Hz | |
| Power loss | 0.5 W | |
| Rated impulse withstand voltage | 4 kV | |
| Response time | <3 ms | |
| Mounting type | DIN rail | |
| Width | 18 mm (1 module) | |
| Dimensions (H × W × D) | 85 × 18 × 68 mm | |
| Weight | approx. 0.113 kg | |
| Operating temperature | -25 to +55 °C | |
| Colour | Light grey, RAL 7035 | |
| Terminal type | Screw terminals | |
| Tightening torque | 1.2–1.5 N·m | |
| Standards | EN 60669-1, EN 60669-2-2 |
Frequently Asked Questions
What is the ABB E297-16-10/8 used for?
The ABB E297-16-10/8 is a monostable installation relay used for electrically controlled switching of lighting and other loads in building, distribution and automation systems.
What is the current rating of the E297-16-10/8?
The relay has a rated switching current of 16 A.
What control voltage does this relay require?
The E297-16-10/8 has an 8 V AC rated control coil, with a specified control supply range of 7.2–8.8 V AC.
What contact configuration does the E297-16-10/8 have?
This model has one normally open (1NO) contact rated for operation at up to 250 V AC.
How is the ABB E297-16-10/8 installed?
The relay is designed for DIN rail mounting and has a compact 18 mm width equivalent to one modular installation unit.
Trusted ABB Switching Technology
ABB E297 installation relays provide compact and dependable switching for building control, electrical distribution and automation applications, combining modular DIN rail installation with low-noise operation and reliable electromechanical switching.
