Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
20.22.8.230.0000 Finder step relay 2 phase switch 2NO 230V
Finder 20.22.8.230.0000 is a 16 A modular step relay with two normally open contacts, a 230 V AC coil and DIN-rail mounting for impulse-controlled electrical loads.
£23.28
Why Choose the Finder 20.22.8.230.0000 Modular Step Relay?
The Finder 20.22.8.230.0000 is a compact and dependable modular step relay designed for impulse-controlled switching in lighting, building automation and electrical distribution applications. As part of the Finder Series 20, it changes contact state whenever its coil receives a momentary control pulse.
Its electromechanical latching operation enables electrical loads to be controlled from multiple momentary push-buttons without requiring the coil to remain continuously energised. A mechanical position indicator and test button support convenient inspection and manual operation during installation, commissioning and maintenance.
With two normally open contacts rated at 16 A and a 230 V AC coil, the 20.22.8.230.0000 provides practical control of lighting and other compatible electrical loads. Its compact 17.4 mm-wide DIN-rail enclosure, IP20 protection and screw terminals simplify installation inside distribution boards and control panels.
Key Advantages
- Impulse-operated modular step relay for centralised load control.
- Two normally open contacts rated at 16 A.
- 230 V AC control coil for mains-voltage control circuits.
- Latching operation does not require continuous coil energisation.
- Mechanical position indicator provides clear contact-status indication.
- Compact DIN-rail format supports space-efficient panel installation.
Key Features
- Finder Series 20 modular step relay.
- DPST-NO contact configuration.
- 16 A contact current rating.
- 230 V AC coil voltage.
- Maximum switching voltage of 400 V AC.
- Single-coil latching mechanism.
- Integrated mechanical indicator and test button.
- Screw terminals and DIN-rail mounting.
Efficient Impulse Control for Lighting and Electrical Loads
A modular step relay changes its output state each time a momentary voltage pulse is applied to the coil. This allows one electrical load to be switched from several push-button locations while avoiding complex conventional multi-way switching arrangements.
The Finder Series 20 is designed for installation in modular distribution equipment. Its latching mechanism, contact-status indication and manual test facility make the 20.22.8.230.0000 particularly useful in building-control systems where reliable, easily maintained switching is required.
Typical Applications
- Lighting circuits controlled from multiple push-buttons.
- Residential and commercial building automation.
- Stairwell and corridor lighting control.
- Electrical distribution boards.
- Industrial control panels.
- Remote switching of compatible electrical loads.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Latching / Impulse Relay | |
|---|---|---|
| Terminal Type | Screw | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | DIN rail | |
| Coil / Supply Voltage | 230 V AC | |
| Contacts | 4NO | |
| IP Rating | IP20 | |
| Manufacturer | Finder | |
| Series | Series 20 | |
| Model | 20.22.8.230.0000 | |
| Product type | Modular step relay | |
| Relay function | Impulse / latching | |
| Contact configuration | 2 NO, DPST-NO | |
| Rated contact current | 16 A | |
| Coil voltage | 230 V AC | |
| Maximum switching voltage | 400 V AC | |
| Contact material | Silver nickel (AgNi) | |
| Operating temperature | −40 to +40 °C | |
| Protection rating | IP20 | |
| Width | 17.4 mm | |
| Mounting type | DIN rail | |
| Terminal type | Screw terminals |
Frequently Asked Questions
What is the Finder 20.22.8.230.0000 used for?
It is used for impulse-controlled switching of lighting and other electrical loads from momentary push-buttons in building and industrial control systems.
What contact configuration does this step relay have?
The relay has two normally open contacts, providing a DPST-NO contact configuration.
What is the contact current rating?
The Finder 20.22.8.230.0000 has a rated contact current of 16 A.
What coil voltage does the relay require?
This exact variant is equipped with a 230 V AC coil.
How is the relay installed?
The relay is designed for DIN-rail mounting inside electrical distribution boards and control panels, with screw terminals for field wiring.
Trusted by Electrical Installers Worldwide
Finder Series 20 modular step relays are widely used by electrical installers, panel builders and building-control professionals for dependable impulse switching and space-efficient DIN-rail installation.
