Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SVR405610R4060 ABB CR-P024MOS1 Pluggable MOS-FET Optocoupler 5A
ABB CR-P024MOS1 pluggable MOS-FET optocoupler with a 10–32 V DC control supply and 5 A, 35 V DC solid-state output for electrically isolated DC switching applications.
£20.10
Why Choose the ABB CR-P024MOS1 Pluggable MOS-FET Optocoupler?
The ABB CR-P024MOS1 is a compact pluggable MOS-FET optocoupler designed for reliable DC signal switching and electrical isolation in industrial automation and control systems. Part of the ABB CR-P range, it provides a solid-state MOS-FET output for switching DC loads without the mechanical contacts used in conventional interface relays.
The CR-P024MOS1 has a 10–32 V DC rated control supply and a MOS-FET output rated at 5 A and 35 V DC. This makes it suitable for interfacing electronic control systems with compatible DC loads where fast, reliable and maintenance-free solid-state switching is required.
The compact optocoupler has an IP67-rated housing and is designed for pluggable installation using a compatible ABB CR-P socket. With a 12.7 mm wide housing and a low 0.011 kg product weight, it provides a space-efficient solution for industrial control panels and interface assemblies.
Key Advantages
- Reliable pluggable MOS-FET optocoupler for industrial automation.
- Wide 10–32 V DC control supply range.
- 5 A MOS-FET output for DC switching applications.
- Output voltage rated up to 35 V DC.
- Solid-state switching provides maintenance-free operation without mechanical relay contacts.
- Optocoupler construction provides electrical isolation between control and output circuits.
- IP67 protection for enhanced protection of the relay housing.
- Compact 12.7 mm wide design helps minimise panel space requirements.
- Pluggable construction allows straightforward replacement and maintenance.
Key Features
- ABB CR-P024MOS1 pluggable optocoupler.
- MOS-FET solid-state output.
- 10–32 V DC control supply.
- 5 A maximum output current.
- 35 V DC maximum output voltage.
- Designed for DC switching applications.
- Pluggable PCB optocoupler construction.
- IP67 protection.
- Compatible with ABB CR-P sockets.
- Compact 12.7 mm wide housing.
- Product net weight of 0.011 kg.
- Designed to IEC/EN 62314 requirements.
Reliable Solid-State Interface Switching for Industrial Automation
The ABB CR-P024MOS1 provides an optically isolated solid-state interface between electronic control equipment and compatible DC loads. Its MOS-FET output allows DC switching at up to 5 A and 35 V DC, making it suitable for control applications where a maintenance-free semiconductor output is preferred.
The pluggable construction allows the CR-P024MOS1 to be installed into a compatible CR-P socket, providing a practical interface solution for control cabinets, PLC systems and industrial automation equipment. Its compact housing and IP67 protection support reliable integration where panel space and environmental protection are important considerations.
Typical Applications
- PLC and electronic controller interfaces.
- Industrial automation control panels.
- DC signal switching and isolation.
- Sensor and actuator interfacing.
- Electronic control system interfaces.
- DC load switching applications.
- Machine control and OEM equipment.
- Industrial switching and control circuits.
- Control cabinet interface assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Interface Relay | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Load Voltage | 35 V DC | |
| Switching Current (A) | 5 A | |
| Series | CR-P | |
| ABB order code | 1SVR405610R4060 | |
| Product type | Pluggable PCB optocoupler | |
| Product group | 310944-Pluggable Relays | |
| Rated control supply voltage | 10–32 V DC | |
| Output type | MOS-FET | |
| Output current | 5 A | |
| Output voltage | 35 V DC | |
| Output signal | 35 V DC / 5 A | |
| Switching type | Solid-state DC switching | |
| Mounting | Pluggable with compatible CR-P socket | |
| Product width | 12.7 mm | |
| Product height | 15.7 mm | |
| Product depth | 29 mm | |
| Product net weight | 0.011 kg | |
| Protection rating | IP67 | |
| Operating temperature | -20 to +50 °C | |
| Storage temperature | -20 to +70 °C | |
| Standards | IEC/EN 62314 |
Frequently Asked Questions
What is the ABB CR-P024MOS1 used for?
The CR-P024MOS1 is a pluggable MOS-FET optocoupler used for electrically isolated DC signal switching between electronic control systems and compatible loads.
What control voltage does the CR-P024MOS1 use?
The CR-P024MOS1 operates with a 10–32 V DC control supply.
What type of output does the CR-P024MOS1 have?
The CR-P024MOS1 has a MOS-FET solid-state output designed for DC switching.
What is the output rating of the CR-P024MOS1?
The MOS-FET output is rated at up to 5 A and 35 V DC.
How is the CR-P024MOS1 installed?
The CR-P024MOS1 is a pluggable PCB optocoupler designed for installation with a compatible ABB CR-P socket.
Trusted by Automation Engineers Worldwide
ABB CR-P optocouplers provide compact, maintenance-free solid-state switching and reliable electrical isolation for industrial automation, control panels and electronic interface applications.
