Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SVR405601R0200 ABB CR-P012AC2 Pluggable Interface Relay 2C/O 12VAC
ABB CR-P012AC2 pluggable interface relay with a 12 V AC control supply, 2 c/o DPDT contacts and a 250 V / 8 A contact rating for industrial signal interfacing and control applications.
£5.24
Why Choose the ABB CR-P012AC2 Pluggable Interface Relay?
The ABB CR-P012AC2 is a compact pluggable interface relay designed for electrical isolation, signal amplification and signal matching between electronic control systems and sensors or actuators. Part of the ABB CR-P range, it provides two changeover contacts for flexible industrial control and automation applications.
The CR-P012AC2 operates with a 12 V AC rated control supply and provides a 2 c/o (DPDT) output with contacts rated at 250 V / 8 A. This configuration allows multiple circuits to be switched from a single input signal while maintaining a compact footprint within control panels.
The relay can be mounted directly on a printed circuit board or used with a compatible ABB CR-P socket. Its IP67-rated relay housing, cadmium-free contacts and compact construction make it suitable for a wide range of industrial interface and control applications.
Key Advantages
- Reliable pluggable interface relay for industrial automation and control.
- 12 V AC rated control supply for low-voltage AC control circuits.
- 2 c/o (DPDT) contacts provide flexible changeover switching.
- 250 V / 8 A contact rating for high-current switching within the CR-P format.
- Two changeover contacts allow multiple circuits to be controlled from one input signal.
- IP67-rated housing provides protection against dust and water ingress.
- Suitable for direct PCB mounting or installation with compatible ABB sockets.
- Compact design helps save space within control panels.
Key Features
- ABB CR-P012AC2 pluggable interface relay.
- 12 V AC rated control supply.
- 2 c/o (DPDT) output contacts.
- 250 V / 8 A contact rating.
- Suitable for switching up to 250 V AC or DC.
- Compact pluggable PCB relay construction.
- IP67 protection for the relay housing.
- Direct PCB mounting capability.
- Compatible with ABB CR-P standard and logical sockets.
- Cadmium-free contact material.
- Optional pluggable function modules are available for compatible CR-P assemblies.
- Compact approximately 12.7 mm wide relay body.
Reliable Interface Switching for Industrial Automation
The ABB CR-P012AC2 provides electrical isolation and signal interfacing between electronic control equipment and field-level devices. Its 12 V AC control supply and two changeover outputs make it suitable for switching and interfacing circuits where multiple contacts are required from a single control signal.
The pluggable construction allows the relay to be installed directly onto a PCB or into a compatible CR-P socket. With two c/o contacts rated at 250 V / 8 A, the CR-P012AC2 provides flexible switching capability while maintaining a compact footprint for control cabinets and industrial automation equipment.
Typical Applications
- PLC and electronic controller interfaces.
- Industrial automation control panels.
- Signal isolation and signal matching.
- Sensor and actuator interfacing.
- Fieldbus system interfaces.
- Machine control and OEM equipment.
- Industrial switching and control circuits.
- Control cabinet interface applications.
- PCB-based industrial control equipment.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Interface Relay | |
|---|---|---|
| Mounting Type | PCB, Plug-in socket | |
| Switching Current (A) | 8 A | |
| Series | CR-P | |
| ABB order code | 1SVR405601R0200 | |
| Product type | Pluggable PCB interface relay | |
| Product group | 310944-Pluggable Relays | |
| Rated control supply voltage | 12 V AC | |
| Output | 2 c/o (DPDT) contacts | |
| Contact rating | 250 V / 8 A | |
| Maximum switched voltage | 250 V AC / 250 V DC | |
| Mounting | PCB or compatible CR-P socket | |
| Product width | 12.7 mm | |
| Product height | 15.7 mm | |
| Product depth | 29 mm | |
| Product net weight | 0.014 kg | |
| Protection rating | IP67 | |
| Contact material | Cadmium-free | |
| Standards | IEC/EN 61810-1 |
Frequently Asked Questions
What is the ABB CR-P012AC2 used for?
The CR-P012AC2 is a pluggable interface relay used for electrical isolation, signal amplification and signal matching between electronic control systems and sensors or actuators.
What control voltage does the CR-P012AC2 use?
The CR-P012AC2 has a 12 V AC rated control supply.
How many contacts does the CR-P012AC2 have?
The CR-P012AC2 has 2 c/o (DPDT) changeover contacts.
What is the contact rating of the CR-P012AC2?
The relay contacts are rated at 250 V / 8 A.
How can the CR-P012AC2 be mounted?
The CR-P012AC2 can be mounted directly on a printed circuit board or used with a compatible ABB CR-P socket.
Trusted by Automation Engineers Worldwide
ABB CR-P interface relays provide compact, high-capacity switching and reliable signal isolation for industrial automation, control panels and electronic interface applications.
