Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
EMAS PV9E30B4444 is an IP65 9-position double-speed crane pendant control station with eight operational controls, a 30 mm 1NC emergency stop and 4 A at 250 V AC switching capacity for industrial crane and hoist applications.
£105.05
The EMAS PV9E30B4444 is a robust 9-position double-speed crane pendant control station designed for reliable operator control of cranes, hoists and industrial lifting equipment. As part of the EMAS PV Series, it combines eight operational control positions with a 30 mm emergency stop, providing a complete handheld solution for demanding material handling applications.
Designed for industrial environments, the PV9E30B4444 provides IP65 ingress protection to help protect its internal switching components against dust and water jets. Its double-speed push-button arrangement enables two-stage directional control, allowing compatible crane and hoist movements to operate at a slower speed for accurate positioning and a higher speed for normal travel.
The PV9E30B4444 incorporates a 1NC emergency stop contact and double-speed controls for multi-axis crane movement. Its contacts have a rated operational current of 4 A at 250 V AC, with a 300 V insulation voltage and AC15 utilisation category, while its mechanically interlocked design helps prevent simultaneous operation in opposing directions.
Double-speed pendant control allows crane and hoist operators to select two stages of movement from the same directional control. The lower-speed stage can be used for accurate load positioning, while the higher-speed stage enables efficient travel during normal lifting and material handling operations.
The EMAS PV Series is engineered specifically for crane applications, combining ergonomic handheld operation with high impact resistance and environmental protection. Mechanical protection against simultaneous opposing commands, directional markings and sealed push-button construction help make the PV9E30B4444 a dependable solution for regular industrial lifting operations.
Tick the specs you need, then view products that match.
| Device Type | Control Station / Enclosure | |
|---|---|---|
| IP Rating | IP65 | |
| Manufacturer | EMAS | |
| Series | PV Series | |
| Model | PV9E30B4444 | |
| Product type | Crane pendant control station | |
| Control configuration | Double speed | |
| Pendant configuration | 9 positions | |
| Operational controls | 8 plus emergency stop | |
| Emergency stop diameter | 30 mm | |
| Emergency stop contact | 1NC | |
| Rated operational current (Ie) | 4 A at 250 V AC | |
| Rated insulation voltage (Ui) | 300 V | |
| Impulse withstand voltage (Uimp) | 2.5 kV | |
| Utilisation category | AC15 | |
| Pollution degree | 3 | |
| Contact material | AgNi | |
| Cable connection section | 1.5–2.5 mm² | |
| Terminal screw torque | 1.5 Nm | |
| Insulation resistance | 10 MΩ at 500 V DC | |
| Short-circuit breaking capacity (Ics) | 1 kA | |
| Mechanical life | Minimum 1,000,000 operations | |
| Electrical life | Minimum 100,000 operations | |
| Operating frequency | Up to 900 operations/hour | |
| Standards | TS EN 60947-5-1, UL 508, VDE 0660 |
The PV9E30B4444 is a crane pendant control station designed for handheld double-speed control of cranes, hoists and other industrial lifting and material handling equipment.
Yes. The PV9E30B4444 provides double-speed directional control, allowing compatible crane movements to use a slower stage for precise positioning and a faster stage for normal travel.
Yes. The pendant incorporates a 30 mm emergency stop with a 1NC contact for integration into the crane or hoist control system.
The PV9E30B4444 has an IP65 protection rating, providing dust-tight protection and resistance to water jets for demanding industrial environments.
The control contacts have a rated operational current of 4 A at 250 V AC, a rated insulation voltage of 300 V and an impulse withstand voltage of 2.5 kV.
EMAS PV Series pendant control stations are engineered for dependable control of cranes, hoists and material handling equipment, combining double-speed operation, emergency stop functionality, mechanical directional protection and IP65 environmental protection.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.