Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
EMAS CP101DK EMAS CP PLASTIC PUSH BUTTON 2NO RED
EMAS CP101DK is a red flush 22 mm momentary industrial push button with two normally open contacts, a spring-return mechanism, a 4 A AC-15 rating at 230 V AC and IP65 front protection.
£8.12
Why Choose the EMAS CP101DK Red Push Button?
The EMAS CP101DK is a robust 22 mm red momentary push button designed for industrial machinery, electrical panels and automation systems. Part of the EMAS CP Series, it combines a flush actuator with two normally open contacts and a spring-return mechanism.
Pressing the red actuator closes both normally open contacts, while releasing it allows the spring mechanism to return the button to its normal position. This momentary operation makes the CP101DK suitable for control commands that should remain active only while the button is pressed or until a separate control circuit takes over.
With an AC-15 operational current rating of 4 A at 230 V AC, IP65 front protection and a standard 22 mm mounting diameter, the CP101DK is suitable for industrial control panels, operator stations and machine enclosures.
Key Advantages
- Highly visible red flush actuator for clear identification on control panels.
- Two normally open contacts allow two control circuits to be operated simultaneously.
- Spring-return operation automatically restores the button when released.
- Flush profile helps reduce accidental operation and panel obstruction.
- IP65 front protection provides resistance to dust and water jets when correctly installed.
- Standard 22 mm panel mounting simplifies installation in industrial control equipment.
- High mechanical and electrical endurance supports reliable industrial operation.
Key Features
- EMAS CP Series plastic control unit.
- Red flush push-button actuator.
- Momentary spring-return operation.
- 2NO contact configuration.
- 4 A at 230 V AC operational current rating for AC-15 applications.
- Flame-retardant V0 PA6.6 contact blocks.
- Silver-nickel AgNi contact material.
- IP65 front protection.
- Standard 22 mm panel mounting.
Reliable Momentary Control for Industrial Equipment
Momentary push buttons provide a temporary control signal while the actuator is pressed. The spring-return mechanism automatically opens the normally open contacts when the operator releases the button, making this design suitable for machine commands, control relays and PLC input circuits.
The EMAS CP101DK incorporates two normally open contacts, allowing one button to operate two compatible control circuits. Its flush red actuator and standard 22 mm format support clear, compact installation alongside selector switches, pilot lights and other industrial control devices.
Typical Applications
- Industrial machinery control panels.
- Process start and control commands.
- Alarm acknowledgement and reset circuits.
- Production and assembly equipment.
- Conveyor and material handling systems.
- Pump and motor control panels.
- Operator control stations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Flush Pushbutton | |
|---|---|---|
| Contacts | 2NO | |
| Product Series | Emas CP Series | |
| Mounting Diameter | 22 mm | |
| Operation | Spring return (momentary) | |
| Illumination | Illuminated | |
| IP Rating | IP65 | |
| Colour | Red | |
| Manufacturer | EMAS | |
| Series | CP Series Plastic | |
| Model | CP101DK | |
| Product type | Momentary push-button control unit | |
| Actuator type | Flush | |
| Actuator colour | Red | |
| Operating mechanism | Spring return | |
| Contact configuration | 2NO | |
| Operational current | 4 A at 230 V AC | |
| Utilisation category | AC-15 | |
| Rated insulation voltage (Ui) | 300 V | |
| Rated impulse withstand voltage (Uimp) | 2.5 kV | |
| Dielectric strength, body to contact | 2,500 V AC | |
| Dielectric strength, contact to contact | 1,500 V AC | |
| Insulation resistance | Minimum 10 MΩ at 500 V DC | |
| Mechanical life | Minimum 500,000 operations | |
| Electrical life | Minimum 100,000 operations | |
| Maximum operating frequency | 3,000 mechanical operations per hour / 1,200 electrical operations per hour | |
| Operating temperature | −15 to +65 °C | |
| Pollution degree | 3 | |
| Protection rating | IP65 | |
| Contact material | AgNi | |
| Cable connection capacity | 1.5–2.5 mm² | |
| Terminal tightening torque | 1.5 Nm | |
| Conditional short-circuit current | 1 kA | |
| Mounting diameter | 22 mm | |
| Standards | IEC 60947-5-1, TS EN 60947-5-1, UL 508 and VDE 0660 |
Frequently Asked Questions
What is the EMAS CP101DK used for?
The CP101DK provides momentary push-button control for industrial machinery, electrical panels and automation systems.
Does the CP101DK remain pressed after operation?
No. The spring-return mechanism automatically returns the actuator to its normal position when it is released.
What contact configuration does the CP101DK have?
The push button is fitted with two normally open contacts, identified as a 2NO contact configuration.
What colour is the CP101DK actuator?
The CP101DK has a red flush actuator designed for clear identification on industrial control panels.
What mounting hole does the CP101DK require?
The push button is designed for installation in a standard 22 mm panel mounting hole.
Reliable Industrial Control from EMAS
EMAS CP Series control units provide dependable switching, standardised panel mounting and robust protection for industrial machinery, automation equipment and electrical control applications.
