Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
EMAS CP101AC30 is a maintained 22 mm three-position key-operated industrial control switch with two normally open contacts, II–0–I positions, key removal in all positions and IP65 front protection.
£17.83
The EMAS CP101AC30 is a robust 22 mm key-operated control switch designed for controlled selection of industrial machinery, electrical panel and automation functions. Part of the EMAS CP Series, it combines three maintained positions with two normally open contacts and removable-key operation.
This stay-put control switch has three positions marked II–0–I, with a 60° switching angle between positions. Each selected position remains engaged until the switch is deliberately operated again, making the CP101AC30 suitable for maintained directional, operating-mode and function selection.
The key can be removed in all three positions, allowing an authorised operator to secure the switch in position II, 0 or I without leaving the key inserted. With an AC-15 operational current rating of 4 A at 230 V AC, IP65 front protection and a standard 22 mm mounting diameter, it is suitable for machine panels, operator stations and industrial control enclosures.
Three-position maintained key switches provide controlled selection between two machine functions and a central neutral position. Because the selected state remains active after operation, this type of switch is suitable for operating-mode selection, directional control and equipment functions that must remain engaged without continuous operator input.
The EMAS CP101AC30 allows the key to be removed from any position, enabling authorised personnel to secure the switch in II, 0 or I. Its two normally open contacts and standard 22 mm mounting format support straightforward integration into compatible industrial panels and operator stations.
Tick the specs you need, then view products that match.
| Contacts | 2NO | |
|---|---|---|
| Product Series | Emas CP Series | |
| Mounting Diameter | 22 mm | |
| Operation | 2 positions – maintained | |
| Illumination | Illuminated | |
| Device Type | Key Selector Switch | |
| IP Rating | IP65 | |
| Manufacturer | EMAS | |
| Series | CP Series Plastic | |
| Model | CP101AC30 | |
| Product type | Key-operated control switch | |
| Switch positions | II–0–I | |
| Switching angle | 60° | |
| Operating mechanism | Stay put | |
| Key removal | All positions | |
| Contact configuration | 2NO | |
| Operational current | 4 A at 230 V AC | |
| Utilisation category | AC-15 | |
| Rated insulation voltage (Ui) | 300 V | |
| Rated impulse withstand voltage (Uimp) | 2.5 kV | |
| Dielectric strength, body to contact | 2,500 V AC | |
| Dielectric strength, contact to contact | 1,500 V AC | |
| Insulation resistance | Minimum 10 MΩ at 500 V DC | |
| Mechanical life | Minimum 500,000 operations | |
| Electrical life | Minimum 100,000 operations | |
| Maximum operating frequency | 3,000 mechanical operations per hour / 1,200 electrical operations per hour | |
| Operating temperature | −15 to +65 °C | |
| Pollution degree | 3 | |
| Protection rating | IP65 | |
| Contact material | AgNi | |
| Cable connection capacity | 1.5–2.5 mm² | |
| Terminal tightening torque | 1.5 Nm | |
| Conditional short-circuit current | 1 kA | |
| Mounting diameter | 22 mm | |
| Standards | IEC 60947-5-1, TS EN 60947-5-1, UL 508 and VDE 0660 |
The CP101AC30 provides key-controlled selection between two maintained machine functions and a central 0 position in industrial control and automation systems.
The switch has three positions marked II–0–I, with a 60° switching angle between positions.
The key can be removed in all three positions, allowing the selected II, 0 or I state to be maintained after key removal.
No. The CP101AC30 has a stay-put mechanism, so it remains in the selected position until it is deliberately switched again.
The switch is fitted with two normally open contacts, identified as a 2NO contact configuration.
EMAS CP Series control units provide dependable switching, standardised panel mounting and robust protection for industrial machinery, automation equipment and electrical control applications.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.