Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SFA619103R1012 ABB CP4-10G-10 Green Maintained Compact Pushbutton 1 NO
ABB CP4-10G-10 is a green non-illuminated maintained extended compact pushbutton with one normally open contact, 22 mm panel mounting and IP67/IP69K front protection for industrial control applications.
£12.99
Why Choose the ABB CP4-10G-10 Compact Pushbutton?
The ABB CP4-10G-10 is a compact green maintained extended pushbutton designed for operator control in industrial machinery, electrical panels and automation systems. As part of the ABB Compact pushbutton range, it provides an all-in-one operator and contact solution that helps simplify panel assembly and reduce installation time.
This pushbutton features maintained operation, an extended green actuator and 1 normally open (1 NO) contact. Unlike a momentary pushbutton, its maintained mechanism retains its switched position after actuation, making it suitable for control functions where the command must remain active until the operator is actuated again.
The CP4-10G-10 is a non-illuminated device with a black plastic bezel and is designed for a standard 22 mm mounting hole. Screw-terminal connections support straightforward panel wiring, while IP67/IP69K front protection provides a high level of resistance to dust and water in demanding industrial environments.
Key Advantages
- Compact maintained pushbutton for industrial control applications.
- Green extended actuator provides clear operator identification.
- Maintained switching action retains the selected state after actuation.
- Integrated 1 normally open (1 NO) contact.
- Standard 22 mm panel mounting for industrial operator interfaces.
- IP67/IP69K front protection provides strong resistance to dust and water.
- All-in-one compact construction helps simplify installation and panel assembly.
Key Features
- ABB CP4 Compact pushbutton series.
- Maintained extended pushbutton.
- Green operator colour.
- Non-illuminated design.
- 1 normally open (1 NO) contact.
- 300 V rated insulation voltage.
- 22 mm mounting-hole diameter.
- Black plastic bezel.
- Screw-terminal electrical connections.
- IP67/IP69K front protection.
- Suitable for industrial machinery and automation control panels.
Reliable Maintained Control for Industrial Machinery
Maintained pushbuttons retain their selected switching state after the operator is pressed, making them useful where a control command needs to remain active without continuous pressure on the actuator. The ABB CP4-10G-10 combines this maintained action with a green extended operator and normally open contact for straightforward machine and process control.
ABB's Compact pilot-device range uses an all-in-one construction intended to reduce installation time and simplify product selection. The CP4-10G-10's 22 mm mounting format, screw connections and high degree of front protection make it suitable for integration into modern industrial operator stations and control panels.
Typical Applications
- Industrial machinery control panels.
- Operator control stations and consoles.
- Factory automation equipment.
- Motor and process control systems.
- Production and packaging machinery.
- Material handling and conveyor systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Extended Pushbutton | |
|---|---|---|
| Contacts | 1NO | |
| Product Series | ABB Compact | |
| Mounting Diameter | 22 mm | |
| Colour | Green | |
| Operation | Maintained | |
| Illumination | Non-illuminated | |
| Series | CP4 Compact Pushbuttons | |
| ABB order code | 1SFA619103R1012 | |
| ABB product group | 311530-Compact Pushbuttons | |
| Product type | Compact pushbutton | |
| Actuator type | Extended | |
| Operator colour | Green | |
| Operation | Maintained | |
| Illumination | Non-illuminated | |
| Contact configuration | 1 NO, 0 NC | |
| Rated insulation voltage | 300 V | |
| Rated frequency | 50/60 Hz | |
| Mounting-hole diameter | 22 mm | |
| Bezel material | Black plastic | |
| Electrical connection | Screw terminals | |
| Front protection | IP67/IP69K | |
| Ambient operating temperature | -25 to +70 °C | |
| Weight | approx. 0.019 kg |
Frequently Asked Questions
What is the ABB CP4-10G-10 used for?
The CP4-10G-10 is a maintained industrial pushbutton used for manual command and control functions in machinery, automation systems and electrical control panels.
Is the ABB CP4-10G-10 momentary or maintained?
The CP4-10G-10 has maintained operation, meaning its switching state is retained after the operator is actuated.
What contacts does the CP4-10G-10 have?
The pushbutton incorporates one normally open (1 NO) contact and no normally closed contacts.
Is the CP4-10G-10 illuminated?
No. The ABB CP4-10G-10 is a non-illuminated pushbutton with a green extended actuator and black plastic bezel.
What mounting hole is required for the CP4-10G-10?
The CP4-10G-10 is designed for installation in a standard 22 mm panel mounting hole.
Trusted Industrial Control from ABB
ABB Compact pilot devices provide machine builders, panel builders and automation engineers with space-efficient operator controls designed for dependable switching, straightforward installation and reliable operation in industrial control systems.
