Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£151.40
The WAGO 787-1664/106-000 is a compact, four-channel electronic circuit breaker (ECB) designed to protect industrial 24 V DC control circuits against overloads and short circuits. Featuring four independently adjustable protection channels, selectable current ratings of 1–6 A per channel and integrated communication functionality, this DIN-rail-mounted module provides dependable circuit protection for industrial automation and electrical control systems.
Part of the WAGO EPSITRON 787 Series, the 787-1664/106-000 operates from a nominal 24 V DC supply, with an input voltage range of 18–30 V DC. Each channel can be independently configured to 1, 2, 3, 4, 5 or 6 A using a sealable selector switch. The module is supplied with a factory setting of 6 A per channel, with all four channels switched on.
The WAGO 787-1664/106-000 combines load-dependent electronic tripping, high capacitive switch-on capability and time-delayed channel switching with practical monitoring and control functions. Illuminated three-colour push-buttons provide local switching, resetting and diagnostics, while a remote control input and two active signalling outputs support communication with compatible PLCs and industrial monitoring equipment.
Unlike electronic circuit breaker variants featuring active current limitation, the 787-1664/106-000 does not provide active current limitation. Its protection behaviour is based on electronic overload and short-circuit detection, with tripping characteristics determined by the connected load and fault conditions. This distinction is important when selecting a circuit breaker for a specific DC distribution system.
Modern industrial automation installations frequently distribute power from a shared 24 V DC power supply to multiple devices, including PLCs, sensors, relays, industrial communication equipment and instrumentation. Without appropriate circuit protection, an overload or short circuit in one branch can affect the common DC supply and interrupt otherwise healthy equipment. The WAGO 787-1664/106-000 electronic circuit breaker addresses this challenge by providing four individually protected output channels with independently adjustable current ratings.
Each channel can be configured to one of six nominal current settings between 1 and 6 A. This allows engineers to select protection ratings appropriate for the connected loads while retaining the convenience of a single compact protection module. The electronic tripping mechanism responds to overload and short-circuit conditions according to the magnitude and duration of the fault.
The 787-1664/106-000 also offers practical communication features. Its S1 remote control input supports remote resetting and switching of selected channels using defined pulse sequences. Two active signalling outputs provide group trip information and individual channel status communication, allowing compatible PLCs and monitoring systems to detect circuit faults and operating conditions.
Another important feature is its high capacitive switch-on capability, which supports compatible electronic loads with input capacitance exceeding 50,000 µF per channel. Time-delayed channel switching helps manage the combined start-up demand when several circuits are energised.
The WAGO 787-1664/106-000 is installed downstream of a suitable 24 V DC power supply. It does not convert AC mains voltage into DC power. Instead, it distributes and protects existing DC power through four independently monitored channels. Its compact DIN-rail housing, adjustable current settings and communication capability make it suitable for new industrial control cabinets and upgrades to existing automation systems.
| Single-phase overcurrent possible | Yes |
|---|---|
| Current measuring range | 1 – 6 A |
| With detachable clamps | Yes |
| Type of electric connection | Spring clamp connection |
| Height | 90 mm |
| Min. adjustable delay-on energization time | 0.016 s |
| Width | 45 mm |
| Max. permitted delay-on energization time | 100 s |
| Depth | 115.5 mm |
| Contains function DC-voltage overcurrent | Yes |
| Manufacturer | WAGO |
| Series | EPSITRON 787 |
| Manufacturer part number | 787-1664/106-000 |
| Product type | Electronic circuit breaker |
| Protection technology | Electronic overload and short-circuit protection |
| Communication capability | Yes |
| Number of channels | 4 |
| Nominal input voltage | 24 V DC |
| Operating input voltage range | 18–30 V DC |
| Nominal output voltage | 4 × 24 V DC |
| Output voltage range | 18–30 V DC, less internal voltage drop |
| Nominal output current | 4 × 1 / 2 / 3 / 4 / 5 / 6 A |
| Current adjustment | Independent sealable selector switch per channel |
| Factory current setting | 6 A per channel |
| Factory channel state | All channels switched on |
| Maximum selectable nominal current per channel | 6 A |
| Voltage drop at 6 A | ≤120 mV |
| Active current limitation | No |
| Electronic tripping | Load-dependent |
| Trip time | 16 ms to 100 s |
| Capacitive switch-on capability | Greater than 50,000 µF per channel |
| Channel switch-on delay | 50 ms to 5 s, load-dependent |
| Typical efficiency | 99% |
| No-load power loss | ≤0.84 W |
| Power loss at 4 × 6 A | ≤4.2 W |
| Internal fuse | T 15 A per channel |
| Protection class | III |
| Protection rating | IP20 according to EN 60529 |
| Connector-to-housing isolation voltage | 0.5 kV DC |
| Reverse-voltage protection | No |
| Reverse-feed withstand voltage | Up to 35 V DC |
| Pollution degree | 2 |
| Transient suppression | 33 V suppressor diode |
| Parallel operation of individual channels | Not permitted |
| Series operation | Not permitted |
| Channel indicators | 4 × multicolour LEDs, green/red/orange |
| Normal operating indication | Green LED |
| Tripped channel indication | Red LED |
| Remote control input | S1 |
| Signalling outputs | 2 × active outputs, S2 and S3 |
| Signalling functions | Group trip indication and individual channel status via pulse sequences |
| Remote reset voltage | 15–30 V DC |
| Minimum remote reset pulse duration | 500 ms |
| Remote switching | Switching of selected channels via pulse sequence |
| Positive input connection technology | Push-in CAGE CLAMP® |
| Positive input connector series | WAGO 831 Series |
| Positive input conductor cross-section | 0.5–10 mm² |
| Positive input conductor size | 20–8 AWG |
| Mounting type | DIN-35 rail |
| Dimensions (W × H × D) | 45 × 90 × 115.5 mm |
| Weight | Approximately 187 g |
| Operating temperature | −25 to +70 °C |
| Storage temperature | −25 to +85 °C |
| Relative humidity | 5–96%, non-condensing |
| Temperature derating | No derating specified |
| MTBF | Greater than 500,000 hours according to IEC 61709 |
| Conformity marking | CE |
| Standards and approvals | EN 61000-6-2, EN 61000-6-3, UL 508, UL 2367 and DNV |
| RoHS compliance | Compliant |
| Country of origin | Germany |
| Manufacturer product information | WAGO 787-1664/106-000 product page |
| Manufacturer datasheet | WAGO technical documentation |
The WAGO 787-1664/106-000 is a four-channel electronic circuit breaker designed to protect industrial 24 V DC circuits against overloads and short circuits. It provides independent current adjustment and protection for four DC output branches, together with communication and remote control functionality.
No. The WAGO 787-1664/106-000 is an electronic circuit breaker, not an AC/DC power supply. It operates downstream of a compatible 24 V DC power source and protects four separate DC circuits.
The module has four independent protection channels. Each channel has its own adjustable current setting and illuminated multifunction button, allowing separate operation, resetting and local diagnostics.
Each channel can be independently set to 1, 2, 3, 4, 5 or 6 A using a sealable selector switch. This allows the protection rating to be selected according to the requirements of the connected load.
The module is factory preset to 6 A per channel, with all four channels switched on. Engineers can adjust the current settings to suit the connected circuits during commissioning.
The electronic circuit breaker is designed for a nominal 24 V DC input and operates over a voltage range of 18–30 V DC. It must be supplied from a compatible DC power source rather than connected directly to AC mains.
No. The WAGO 787-1664/106-000 does not provide active current limitation. It uses electronic overload and short-circuit detection with load-dependent tripping. This characteristic should be considered when selecting the module for a particular DC power distribution system.
The module has a load-dependent trip time ranging from 16 ms to 100 s. The actual trip time depends on the magnitude and duration of the overload or fault condition.
Yes. The module includes a remote control input S1 that can reactivate tripped channels using a 15–30 V DC pulse lasting at least 500 ms. Selected channels can also be switched on or off using the manufacturer's defined pulse sequences.
The module provides group trip signalling, individual channel status communication and remote channel control. It uses a remote input and active signalling outputs with defined pulse sequences for integration with compatible PLCs and monitoring systems.
Each channel includes an illuminated three-colour multifunction button. Green indicates normal operation, while red indicates a tripped channel. The active signalling outputs provide additional status information for external monitoring.
Yes. The electronic circuit breaker supports a switch-on capacitance greater than 50,000 µF per channel. Its time-delayed channel switching also helps manage start-up conditions for compatible electronic loads.
No. Parallel operation of individual channels is not permitted for the WAGO 787-1664/106-000. Series operation is also not permitted. Each output must be connected in accordance with WAGO's installation instructions.
Both devices are four-channel electronic circuit breakers for industrial 24 V DC systems. The 787-1664/106-000 offers adjustable current ratings of 1–6 A, communication capability through active signalling outputs and no active current limitation. The 787-1664/006-1054 offers selectable ratings of 0.5–6 A and a potential-free group signalling contact. Their signalling arrangements and protection characteristics differ, so they should not be treated as direct replacements without checking application requirements.
The module is designed for DIN-35 rail mounting inside industrial electrical control cabinets. Its IP20 protection rating means it should be installed within a suitable enclosure providing the necessary environmental and electrical protection.
WAGO EPSITRON electronic circuit breakers provide dependable protection for industrial DC power distribution systems. The WAGO 787-1664/106-000 combines four independently adjustable 24 V DC protection channels, electronic overload and short-circuit detection, high capacitive switch-on capability, remote reset functionality and intelligent status communication to support reliable automation equipment operation and effective circuit fault management.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.