Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£190.72
The WAGO 787-1664/006-1054 is a compact, four-channel electronic circuit breaker (ECB) designed to protect industrial 24 V DC control circuits against overloads and short circuits. Featuring four independently adjustable output channels, selectable current ratings from 0.5 to 6 A per channel and active electronic current limitation, this DIN-rail-mounted protection module provides dependable power distribution and circuit fault management for industrial automation systems.
Part of the WAGO EPSITRON 787 Series, the 787-1664/006-1054 operates from a nominal 24 V DC input, with an operating voltage range of 18–30 V DC. Each output channel can be independently configured to 0.5, 1, 2, 3, 4 or 6 A using a sealable selector switch. This specialty configuration is supplied with all four channels preset to 0.5 A and switched off, allowing engineers to configure the required protection settings before energising connected equipment.
A distinguishing feature of the WAGO 787-1664/006-1054 is its potential-free group signalling contact, connected through terminals 11 and 12. This provides collective indication of tripped or switched-off channels, while a remote input allows tripped channels to be reactivated from a compatible control system. Combined with illuminated three-colour channel buttons, high capacitive switch-on capability and time-delayed channel switching, the module offers practical circuit protection and diagnostics for modern industrial electrical cabinets.
Industrial automation systems often distribute power from a shared 24 V DC power supply to several control devices, including PLCs, sensors, relays, communication equipment and instrumentation. A short circuit or overload in one branch can affect the common DC supply and interrupt otherwise healthy equipment. The WAGO 787-1664/006-1054 electronic circuit breaker addresses this challenge by providing four separately protected outputs with individually adjustable current ratings.
Each channel can be configured to one of six nominal current settings between 0.5 and 6 A. The module uses active electronic current limitation and load-dependent tripping to respond to overload and short-circuit conditions. Its high capacitive switch-on capability supports compatible electronic loads with significant input capacitance, while time-delayed channel switching helps manage start-up demands.
The 787-1664/006-1054 specialty configuration is particularly useful for applications requiring collective circuit status monitoring. Its potential-free contact at terminals 11 and 12 provides group signalling for tripped and switched-off channels, enabling straightforward integration with compatible PLC input circuits or monitoring equipment. The S1 remote input also supports reactivation of tripped channels without requiring local access to the module.
Unlike an AC/DC power supply, the WAGO 787-1664/006-1054 does not convert mains voltage into 24 V DC. It is installed downstream of a suitable DC power supply to distribute and protect existing DC power. Its compact DIN-rail housing, illuminated channel controls and independently adjustable protection settings make it suitable for new industrial control cabinets and upgrades to existing automation systems.
| Single-phase overcurrent possible | Yes |
|---|---|
| Current measuring range | 0.5 – 6 A |
| With detachable clamps | Yes |
| Type of electric connection | Spring clamp connection |
| Height | 90 mm |
| Min. adjustable delay-on energization time | 0.016 s |
| Width | 45 mm |
| Max. permitted delay-on energization time | 5 s |
| Depth | 115.5 mm |
| Contains function DC-voltage overcurrent | Yes |
| Manufacturer | WAGO |
| Series | EPSITRON 787 |
| Manufacturer part number | 787-1664/006-1054 |
| Product type | Electronic circuit breaker |
| Configuration | Specialty configuration with potential-free group signalling |
| Protection technology | Electronic protection with active current limitation |
| Number of channels | 4 |
| Nominal input voltage | 24 V DC |
| Operating input voltage range | 18–30 V DC |
| Nominal output voltage | 4 × 24 V DC |
| Output voltage range | 18–30 V DC, less internal voltage drop |
| Nominal output current | 4 × 0.5 / 1 / 2 / 3 / 4 / 6 A |
| Current adjustment | Independent sealable selector switch per channel |
| Factory current setting | 0.5 A per channel |
| Factory channel state | All channels switched off |
| Maximum selectable nominal current per channel | 6 A |
| Voltage drop at 6 A | ≤145 mV |
| Active current limitation | Yes |
| Typical current limitation | 1.3 × selected nominal output current |
| Trip time | 16 ms to 5 s, load-dependent |
| Capacitive switch-on capability | Greater than 58,000 µF per channel |
| Channel switch-on delay | 50 ms to 5 s, load-dependent |
| Efficiency | ≥99% |
| No-load power loss | ≤0.77 W |
| Power loss at 4 × 6 A | ≤4.3 W |
| Internal fuse | T 15 A per channel |
| Protection class | III |
| Protection rating | IP20 according to EN 60529 |
| Connector-to-housing isolation voltage | 500 V DC |
| Reverse-voltage protection | No |
| Parallel operation of individual channels | Not permitted |
| Series operation | Not permitted |
| Channel indicators | 4 × multicolour LEDs, green/red/orange |
| Normal operating indication | Green LED |
| Tripped channel indication | Red LED |
| Remote control input | S1 |
| Group signalling | Potential-free contact |
| Group signalling terminals | 11 and 12 |
| Group signalling function | Collective indication of tripped and switched-off channels |
| Remote reset voltage | 15–30 V DC |
| Minimum remote reset pulse duration | 500 ms |
| Positive input connection technology | Push-in CAGE CLAMP® |
| Positive input conductor cross-section | 0.5–10 mm² |
| Positive input conductor size | 20–8 AWG |
| Positive input strip length | 13–15 mm |
| Mounting type | DIN-35 rail |
| Dimensions (W × H × D) | 45 × 90 × 115.5 mm |
| Weight | Approximately 170 g |
| MTBF | Greater than 500,000 hours according to IEC 61709 |
| Standards and approvals | EN 61000-6-2, EN 61000-6-3, UL 508, UL 2367 and DNV |
| RoHS compliance | Compliant |
| Manufacturer product information | WAGO 787-1664/006-1054 product page |
The WAGO 787-1664/006-1054 is a four-channel electronic circuit breaker designed to protect industrial 24 V DC circuits against overloads and short circuits. It provides independent current adjustment and protection for four DC output branches, together with collective status signalling.
No. The WAGO 787-1664/006-1054 is an electronic circuit breaker, not an AC/DC power supply. It operates downstream of a compatible 24 V DC power source and protects four separate DC circuits.
The module has four independent protection channels. Each channel has its own adjustable current setting and illuminated multifunction button, allowing separate operation, resetting and local diagnostics.
Each channel can be independently set to 0.5, 1, 2, 3, 4 or 6 A using a sealable selector switch. This allows the protection rating to be selected according to the requirements of the connected load.
The 787-1664/006-1054 specialty configuration is factory preset to 0.5 A per channel, with all four channels switched off. Engineers can configure the required current settings and activate the channels during commissioning.
The electronic circuit breaker is designed for a nominal 24 V DC input and operates over a voltage range of 18–30 V DC. It must be supplied from a compatible DC power source rather than connected directly to AC mains.
Active current limitation means the electronic circuit breaker restricts excessive current during overload or short-circuit conditions. The WAGO 787-1664/006-1054 has a typical current limitation of approximately 1.3 times the selected nominal current, helping protect connected DC distribution circuits.
The module includes a potential-free group signalling contact at terminals 11 and 12. It provides collective indication when channels are tripped or switched off, allowing compatible PLC inputs and monitoring systems to detect the overall protection status.
Yes. The module includes a remote control input S1 that can reactivate tripped channels using a 15–30 V DC pulse lasting at least 500 ms. This allows compatible control systems to restore channels after the cause of a trip has been addressed.
Each channel includes an illuminated three-colour multifunction button. Green indicates normal operation, while red indicates a tripped channel. The potential-free group signalling contact provides additional collective status information for external monitoring.
Yes. The electronic circuit breaker supports a switch-on capacitance greater than 58,000 µF per channel. Its time-delayed channel switching also helps manage start-up conditions for compatible electronic loads.
No. Parallel operation of individual channels is not permitted for the WAGO 787-1664/006-1054. Series operation is also not permitted. Each output must be connected in accordance with WAGO's installation instructions.
Both models provide four adjustable 24 V DC protection channels with selectable current ratings of 0.5–6 A. The 787-1664/006-1054 is a specialty configuration with a potential-free group signalling contact and a factory preset of 0.5 A with channels switched off. The 787-1664/006-1000 uses active signalling outputs and has different factory settings and protection characteristics. The variants should not be treated as direct replacements without checking the control wiring and application requirements.
The module is designed for DIN-35 rail mounting inside industrial electrical control cabinets. Its IP20 protection rating means it should be installed within a suitable enclosure providing the necessary environmental and electrical protection.
WAGO EPSITRON electronic circuit breakers provide dependable protection for industrial DC power distribution systems. The WAGO 787-1664/006-1054 combines four independently adjustable 24 V DC protection channels, active current limitation, high capacitive switch-on capability, remote reset functionality and potential-free group signalling to support reliable automation equipment operation and effective circuit fault management.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.