Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£190.72
The WAGO 787-1664/000-200 is a compact and reliable 4-channel electronic circuit breaker designed to provide selective overcurrent protection for 48 V DC industrial power distribution systems. As part of the established WAGO 787 electronic circuit breaker series, this DIN rail-mounted protection module is ideal for industrial automation engineers, machine builders and control panel manufacturers requiring dependable protection of multiple DC load circuits.
Featuring four independently adjustable protection channels, the WAGO 787-1664/000-200 provides selectable current settings of 2, 3, 4, 6, 8 or 10 A per channel. This allows individual circuits to be protected according to the requirements of connected equipment, helping isolate electrical faults without unnecessarily disconnecting unaffected loads. Integrated multicolour LED indicators and illuminated operating buttons simplify local switching, resetting and fault diagnostics.
With a 48 V DC nominal input voltage, an operating range of 32–58 V DC and a compact 45 mm-wide DIN rail housing, this electronic circuit breaker is well suited to industrial control cabinets and distributed DC power systems. Its integrated remote control input and active signalling outputs enable communication with external monitoring and automation equipment, supporting efficient fault detection and remote circuit management.
Electronic circuit breakers such as the WAGO 787-1664/000-200 protect DC-powered industrial equipment by detecting excessive current and disconnecting affected load circuits. Unlike conventional protection arrangements that may interrupt an entire power supply during a fault, this four-channel electronic circuit breaker enables individual circuits to be monitored and disconnected independently. This selective protection helps maintain the operation of unaffected equipment and reduces unnecessary interruptions to industrial processes.
Each of the four channels can be configured with a current rating between 2 and 10 A, allowing protection settings to be matched to the requirements of connected devices. The integrated multicolour LEDs provide immediate visual feedback, while the S1 remote control input and S2/S3 signalling outputs enable external control and monitoring. These features simplify fault identification and support integration with industrial automation systems.
Designed specifically for 48 V DC power distribution, the WAGO 787-1664/000-200 is suitable for protecting industrial controllers, communication equipment and other compatible DC loads. Its time-delayed switching behaviour helps manage the connection of multiple circuits, while its high capacitive switch-on capability supports electronic equipment with significant input capacitance. Combined with efficient operation, compact DIN rail installation and reliable spring-clamp connections, the device provides an effective solution for modern industrial electrical protection systems.
| Single-phase overcurrent possible | Yes |
|---|---|
| Current measuring range | 2 – 10 A |
| With detachable clamps | Yes |
| Type of electric connection | Spring clamp connection |
| Height | 90 mm |
| Min. adjustable delay-on energization time | 0.016 s |
| Width | 45 mm |
| Max. permitted delay-on energization time | 100 s |
| Depth | 115.5 mm |
| Contains function DC-voltage overcurrent | Yes |
| Manufacturer | WAGO |
| Series | WAGO 787 Series |
| Model | 787-1664/000-200 |
| Product type | Electronic circuit breaker / DC electronic circuit protection module |
| Protection technology | Electronic overcurrent protection |
| Number of channels | 4 |
| Nominal input voltage | 48 V DC |
| Input voltage range | 32–58 V DC |
| Nominal output voltage | 4 × 48 V DC |
| Output voltage range | 32–58 V DC, less internal voltage drop |
| Adjustable output current | 2 / 3 / 4 / 6 / 8 / 10 A per channel |
| Maximum nominal current setting | 10 A per channel |
| Factory-default current setting | 10 A per channel |
| Current adjustment | Individual sealable selector switches |
| Voltage drop | ≤ 175 mV at input (+) |
| Switch-on capacity | > 50,000 µF per channel |
| Channel switch-on delay | Load-dependent, 50 ms to 5 s |
| Overcurrent trip time | Load-dependent, approximately 16 ms to 100 s |
| Active current limitation | No |
| Typical efficiency | 99% |
| Power loss | ≤ 0.84 W at no load; ≤ 8 W at 4 × 10 A |
| Status indication | 4 × multicolour LEDs (green / red / orange) |
| Normal operation indication | Green LED |
| Tripped channel indication | Red LED |
| Remote control input | 1 × S1 |
| Active signalling outputs | 2 × S2 / S3 |
| Remote reset signal | 15–58 V DC pulse for at least 500 ms |
| Remote switching | Individual channel control via pulse sequence |
| Internal fuse | T 15 A per channel |
| Isolation voltage (connectors to housing) | 0.5 kV DC |
| Protection class | III |
| Protection rating | IP20 according to EN 60529 |
| Transient suppression | 68 V suppressor diode |
| Reverse voltage protection | No |
| Reverse-feed voltage resistance | ≤ 58 V DC |
| Parallel operation of individual channels | Not permitted |
| Series operation | Not permitted |
| Mean time between failures (MTBF) | > 500,000 hours according to IEC 61709 |
| Input (+) connection | Push-in CAGE CLAMP®, WAGO 831 Series |
| Input (+) conductor cross-section | 0.5–10 mm² |
| Input (+) stripping length | 13–15 mm |
| Input (−), output and signalling connections | CAGE CLAMP®, WAGO 721 Series |
| Output / signalling conductor cross-section | 0.08–2.5 mm² |
| Output / signalling stripping length | 8–9 mm |
| Mounting type | DIN 35 rail according to EN 60715 |
| Dimensions (H × W × D) | 90 × 45 × 115.5 mm |
| Weight | Approximately 170 g |
| Pollution degree | 2 |
| Standards and approvals | EN 61000-6-2, EN 61000-6-3, UL 508, UL 2367 and DNV |
| Installation environment | Industrial electrical control cabinets and 48 V DC distribution panels |
The WAGO 787-1664/000-200 is a four-channel electronic circuit breaker designed to protect individual 48 V DC circuits against overcurrent conditions. It is commonly used in industrial automation, electrical control panels and DC power distribution systems.
The device features four independently protected channels. Each channel can be individually configured, switched and monitored, allowing separate protection of multiple DC loads connected to a common power supply.
The electronic circuit breaker operates from a nominal 48 V DC supply and supports an operating input voltage range of 32–58 V DC. It is specifically designed for compatible 48 V DC power distribution systems.
Each protection channel can be independently adjusted to 2, 3, 4, 6, 8 or 10 A using its selector switch. This allows the protection threshold to be matched to the electrical requirements of individual connected loads.
Yes. The device includes a remote control input (S1) that allows tripped channels to be reactivated using a 15–58 V DC control pulse lasting at least 500 ms. Individual channels can also be switched remotely using the supported pulse-sequence control method.
Each channel features a multicolour LED status indicator. A green indication identifies normal channel operation, while a red indication identifies a tripped channel. The integrated signalling outputs also support remote fault indication and channel status monitoring.
Yes. Each channel provides a switch-on capacity greater than 50,000 µF, making the device suitable for compatible industrial electronic loads with significant input capacitance. Time-delayed channel switching also helps manage the connection of multiple loads.
No. The manufacturer specifies that parallel operation of individual channels is not permitted. Each channel must operate within its selected current rating, and series operation is also not permitted.
No. The WAGO 787-1664/000-200 is an electronic circuit protection module rather than an AC/DC power supply. It requires a suitable external 48 V DC supply and distributes that voltage through four independently protected output channels.
The device is designed for mounting on a standard 35 mm DIN rail inside industrial electrical control cabinets and DC distribution panels. Its compact 45 mm width and IP20 protection rating make it suitable for protected electrical installations.
WAGO electronic circuit breakers provide dependable protection for industrial DC power distribution systems. Combining four independently adjustable protection channels, integrated LED diagnostics, remote switching functionality and compact DIN rail installation, the WAGO 787-1664/000-200 offers automation engineers and machine builders a practical solution for protecting critical 48 V DC equipment while supporting efficient fault management and reliable system operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.