Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£122.45
The WAGO 787-1662/006-1000 is a compact, two-channel electronic circuit breaker (ECB) designed to protect industrial 24 V DC control circuits against overloads and short circuits. Featuring independently adjustable current ratings of 0.5–6 A per channel, active current limitation and intelligent monitoring capabilities, this DIN-rail-mounted protection module provides dependable circuit protection for industrial automation and electrical control systems.
Part of the WAGO 787 Series electronic circuit breaker range, the 787-1662/006-1000 operates from a nominal 24 V DC supply, with an operating voltage range of 18–30 V DC. Each output channel can be configured independently using a sealable selector switch, allowing engineers to select current ratings of 0.5, 1, 2, 3, 4 or 6 A according to the requirements of connected equipment.
The module combines active current limitation, load-dependent tripping, high capacitive load capability and time-delayed channel switching to support selective protection of DC distribution circuits. Illuminated three-colour multifunction buttons provide local operation and diagnostics, while a remote control input and active signalling outputs enable integration with compatible PLCs and industrial monitoring systems. With 99% typical efficiency, compact dimensions and DIN-rail mounting, the WAGO 787-1662/006-1000 is an effective solution for modern industrial control cabinets.
Industrial automation installations often distribute power from a shared 24 V DC power supply to multiple control devices, including PLCs, sensors, relays, communication interfaces and industrial instrumentation. A fault in one branch can affect the common DC supply and interrupt otherwise healthy equipment. The WAGO 787-1662/006-1000 electronic circuit breaker addresses this challenge by providing two individually protected output channels with independently adjustable current ratings.
The module's 0.5–6 A adjustable protection range allows engineers to select an appropriate nominal current for each connected circuit. Unlike the fixed-current WAGO 787-1662/004-1000 variant, the 787-1662/006-1000 provides six selectable current settings per channel. This flexibility is particularly useful in control panels containing equipment with different current requirements, helping improve protection coordination and reduce unnecessary circuit interruptions.
The active current limitation function helps restrict excessive current during overload and short-circuit conditions. High capacitive switch-on capability supports compatible devices with substantial input capacitance, while time-delayed channel switching helps manage start-up demands. Illuminated channel buttons provide local operation and diagnosis, and the remote input and active signalling outputs allow integration with compatible PLCs and monitoring systems.
The WAGO 787-1662/006-1000 is installed downstream of a compatible DC power supply. It does not convert AC mains voltage into DC power; instead, it distributes and protects existing 24 V DC power. Its compact DIN-rail housing and removable CAGE CLAMP® connections make it suitable for new industrial control panels and upgrades to existing automation installations.
| Single-phase overcurrent possible | Yes |
|---|---|
| Current measuring range | 0.5 – 6 A |
| With detachable clamps | Yes |
| Type of electric connection | Spring clamp connection |
| Height | 90 mm |
| Min. adjustable delay-on energization time | 0.016 s |
| Width | 45 mm |
| Max. permitted delay-on energization time | 5 s |
| Depth | 115.5 mm |
| Contains function DC-voltage overcurrent | Yes |
| Manufacturer | WAGO |
| Series | 787 |
| Manufacturer part number | 787-1662/006-1000 |
| Product type | Electronic circuit breaker |
| Protection technology | Electronic protection with active current limitation |
| Number of channels | 2 |
| Nominal input voltage | 24 V DC |
| Operating input voltage range | 18–30 V DC |
| Nominal output voltage | 2 × 24 V DC |
| Output voltage range | 18–30 V DC, less internal voltage drop |
| Nominal output current | 2 × 0.5 / 1 / 2 / 3 / 4 / 6 A |
| Current adjustment | Independent sealable selector switch per channel |
| Factory current setting | 6 A per channel |
| Factory channel state | Switched on |
| Maximum nominal output current per channel | 6 A |
| Voltage drop at 6 A | ≤145 mV |
| Active current limitation | Yes |
| Typical current limitation | 1.7 × selected nominal output current |
| Trip time | Approximately 16 ms to 5 s, load-dependent |
| Capacitive switch-on capability | Greater than 65,000 µF per channel |
| Channel switch-on delay | 50 ms to 5 s, load-dependent |
| Typical efficiency | 99% |
| No-load power loss | ≤0.55 W |
| Power loss at 2 × 6 A | ≤2.5 W |
| Internal fuse | T 15 A per channel |
| Protection class | III |
| Protection rating | IP20 according to EN 60529 |
| Connector-to-housing insulation voltage | 0.5 kV DC |
| Reverse-voltage protection | No |
| Reverse-feed withstand voltage | 35 V DC |
| Pollution degree | 2 |
| Transient suppression | 33 V suppressor diode |
| Parallel operation of individual channels | Not permitted |
| Series operation | Not permitted |
| Channel indicators | 2 × multicolour LEDs, green/red/orange |
| Normal operating indication | Green LED |
| Tripped channel indication | Red LED |
| Remote control input | S1 |
| Signalling outputs | 2 × active outputs, S2 and S3 |
| Remote reset voltage | 15–30 V DC |
| Minimum remote reset pulse duration | 500 ms |
| Remote switching | Channel on/off control using specified pulse sequences |
| Positive input connection technology | Push-in CAGE CLAMP® |
| Positive input connector series | WAGO 831 Series |
| Positive input conductor cross-section | 0.5–10 mm² |
| Positive input conductor size | 20–8 AWG |
| Positive input strip length | 13–15 mm |
| Negative input, output and signalling connection technology | CAGE CLAMP® |
| Negative input, output and signalling connector series | WAGO 721 Series |
| Output and signalling conductor cross-section | 0.08–2.5 mm² |
| Output and signalling conductor size | 28–12 AWG |
| Output and signalling strip length | 8–9 mm |
| Mounting type | DIN-35 rail |
| Depth from upper edge of DIN rail | 115.5 mm |
| Dimensions (W × H × D) | 45 × 90 × 115.5 mm |
| Weight | Approximately 170 g |
| Operating temperature | −25 to +70 °C |
| Storage temperature | −25 to +85 °C |
| Relative humidity | 5–96%, non-condensing |
| Temperature derating | None specified within the rated operating range |
| MTBF | Greater than 500,000 hours according to IEC 61709 |
| Conformity marking | CE |
| Standards and approvals | EN 61000-6-2, EN 61000-6-3, UL 508, UL 2367 and DNV |
| RoHS compliance | Compliant |
| Manufacturer product information | WAGO 787-1662/006-1000 product page |
The WAGO 787-1662/006-1000 is a two-channel electronic circuit breaker designed to protect industrial 24 V DC circuits against overloads and short circuits. It provides independent current adjustment, protection and monitoring for two DC output branches.
No. The WAGO 787-1662/006-1000 is an electronic circuit breaker, not an AC/DC power supply. It operates downstream of a compatible 24 V DC power source and protects two separate DC circuits.
The module has two independent protection channels. Each channel has its own adjustable current setting and illuminated multifunction button, allowing separate operation and monitoring.
Each channel can be independently set to 0.5, 1, 2, 3, 4 or 6 A using a sealable selector switch. The factory setting is 6 A per channel, with both channels switched on.
The electronic circuit breaker is designed for a nominal 24 V DC input and operates over a voltage range of 18–30 V DC. It must be supplied from a compatible DC power source rather than connected directly to AC mains.
Active current limitation means the electronic circuit breaker restricts current during overload or short-circuit conditions. The WAGO 787-1662/006-1000 has a typical current limitation of approximately 1.7 times the selected nominal current, helping protect connected DC distribution circuits.
Yes. The module includes a remote control input that can reactivate tripped channels using a 15–30 V DC pulse lasting at least 500 ms. Compatible control systems can also switch channels on or off using specified pulse sequences.
Each channel has a three-colour illuminated multifunction button. Green indicates normal operation, while red indicates a tripped channel. The module also provides active signalling outputs for integration with compatible monitoring equipment.
Yes. The electronic circuit breaker supports a switch-on capacitance greater than 65,000 µF per channel. Its time-delayed channel switching also helps manage start-up conditions for compatible electronic loads.
No. Parallel operation of individual channels is not permitted for the WAGO 787-1662/006-1000. Series operation is also not permitted. Each channel must be connected in accordance with WAGO's installation instructions.
Both devices are two-channel electronic circuit breakers for industrial 24 V DC systems. The WAGO 787-1662/004-1000 provides fixed current limitation designed for NEC Class 2 limited-power circuits, while the WAGO 787-1662/006-1000 provides independently adjustable current ratings of 0.5–6 A per channel. The adjustable version offers greater flexibility for protecting loads with different current requirements.
An electronic circuit breaker uses electronic current monitoring, active current limitation and load-dependent tripping to protect DC circuits. The WAGO 787-1662/006-1000 also provides adjustable current settings, local status indication, remote reset capability and active signalling outputs.
The module is designed for DIN-35 rail mounting inside industrial electrical control cabinets. Its IP20 protection rating means it should be installed within a suitable enclosure providing the necessary environmental and electrical protection.
WAGO electronic circuit breakers provide dependable protection for industrial DC power distribution systems. The WAGO 787-1662/006-1000 combines two independently adjustable 24 V DC protection channels, active current limitation, high capacitive load capability, remote reset functionality and intelligent status signalling to support reliable automation equipment operation and effective circuit fault management.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.