Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£117.59
The WAGO 787-1662/000-004 is a compact and reliable 2-channel electronic circuit breaker designed to protect industrial 24 V DC power distribution systems against overloads and short circuits. As part of the established WAGO EPSITRON 787 electronic circuit breaker series, this intelligent protection module provides individually adjustable current settings, integrated diagnostics and remote control functionality, making it ideal for industrial automation, electrical control cabinets and machine-building applications.
Featuring two independently adjustable output channels rated from 2–10 A, the WAGO 787-1662/000-004 enables selective protection of connected DC loads. Each channel can be configured to a nominal current of 2, 3, 4, 6, 8 or 10 A using an individual sealable selector switch. Unlike the standard 787-1662 configuration, this special variant is factory preset to 2 A with both channels switched off, allowing the installer to configure and activate each protected circuit during commissioning.
Operating from a 24 V DC nominal input supply with an allowable voltage range of 18–30 V DC, the WAGO 787-1662/000-004 combines 99% typical efficiency, illuminated three-colour status indicators and communication-capable remote control functionality. Its IP20 protection rating, compact DIN-rail-mounted housing and operating temperature range of −25 to +70 °C make it suitable for demanding industrial control cabinet environments. The module also features WAGO Push-in CAGE CLAMP® and CAGE CLAMP® connection technology for secure and efficient electrical installation.
Electronic circuit breakers such as the WAGO 787-1662/000-004 protect industrial 24 V DC distribution circuits by monitoring current and disconnecting affected outputs when overload or short-circuit conditions cause the electronic protection to trip. Unlike conventional single-circuit protection devices, this module provides two independently adjustable protection channels, allowing different current ratings to be assigned to individual loads. This helps isolate faults at the affected circuit and reduces the likelihood of a single load fault disrupting other equipment connected to the same DC power supply system.
The WAGO EPSITRON 787 electronic circuit breaker series is designed for industrial automation engineers, control panel manufacturers and machine builders requiring flexible DC circuit protection and diagnostic functionality. The 787-1662/000-004 special configuration is supplied with both channels switched off and preset to 2 A, allowing engineers to establish appropriate current settings before activating the protected outputs. Individual illuminated pushbuttons provide local switching and resetting, while the remote control input and active signalling outputs enable integration with compatible automation controllers. Its high switch-on capacity, delayed channel activation and compact DIN-rail construction make it particularly suitable for industrial control cabinets and decentralised DC power distribution systems.
| Manufacturer | WAGO |
|---|---|
| Series | WAGO EPSITRON 787 Electronic Circuit Breakers |
| Model | 787-1662/000-004 |
| Product type | Electronic circuit breaker |
| Configuration | Special factory-preset version |
| Protection function | Electronic overload and short-circuit protection for DC circuits |
| Number of output channels | 2 |
| Nominal input voltage | 24 V DC |
| Input voltage range | 18–30 V DC |
| Nominal output voltage | 2 × 24 V DC |
| Output voltage range | 18–30 V DC, minus voltage drop |
| Adjustable output current per channel | 2–10 A |
| Selectable current ratings | 2 / 3 / 4 / 6 / 8 / 10 A |
| Maximum nominal current per channel | 10 A |
| Combined nominal output current | 20 A at 2 × 10 A |
| Factory-default current setting | 2 A per channel |
| Factory-default channel status | Both channels switched off |
| Current adjustment method | Sealable selector switch for each channel |
| Maximum voltage drop | 200 mV through input (+) |
| Switch-on capacity | Greater than 50,000 µF per channel |
| Channel switch-on behaviour | Time-delayed, load-dependent |
| Channel switch-on delay | 50 ms to 5 s |
| Active current limitation | No |
| Typical efficiency | 99% |
| Maximum no-load power loss | 0.84 W |
| Maximum power loss at 2 × 10 A | 5.5 W |
| Local operating controls | 2 illuminated pushbuttons |
| Channel status indicators | 2 × three-colour LEDs (green/red/orange) |
| Normal operation indication | Green LED |
| Tripped channel indication | Red LED |
| Remote control input | 1 × S1 |
| Active signalling outputs | 2 × S2 / S3 |
| Common group signal | S3, channel switched off or tripped |
| Remote reset voltage | 15–30 V DC |
| Minimum remote reset pulse duration | 500 ms |
| Remote control functions | Reset tripped channels and switch selected channels on/off via pulse sequences |
| Communication capability | Individual channel status communication using pulse sequences |
| Internal fuse | T 15 A per channel |
| Transient suppression | 33 V suppressor diode |
| Isolation voltage (connections to housing) | 0.5 kV DC |
| Protection class | Class III |
| Protection rating | IP20, EN 60529 |
| Reverse voltage protection | No |
| Resistance to reverse feed | Up to 35 V DC |
| Pollution degree | 2 |
| Parallel operation of individual channels | Not permitted |
| Series operation | Not permitted |
| Mean time between failures (MTBF) | Greater than 500,000 h, IEC 61709 |
| Positive input connection technology | Push-in CAGE CLAMP® |
| Positive input connector series | WAGO 831 |
| Positive input solid conductor cross-section | 0.5–10 mm² |
| Positive input fine-stranded conductor cross-section | 0.5–10 mm² |
| Positive input conductor size | 20–8 AWG |
| Positive input stripping length | 13–15 mm |
| Negative input, output and signalling connection technology | CAGE CLAMP® |
| Output and signalling connector series | WAGO 721 |
| Output and signalling solid conductor cross-section | 0.08–2.5 mm² |
| Output and signalling fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Output and signalling conductor size | 28–12 AWG |
| Output and signalling stripping length | 8–9 mm |
| Mounting type | DIN-35 rail |
| Dimensions (H × W × D) | 90 × 45 × 115.5 mm, depth measured from the upper edge of the DIN rail |
| Weight | 170 g |
| Fire load | 0.623 MJ |
| Operating temperature | −25 to +70 °C |
| Storage temperature | −25 to +85 °C |
| Relative humidity | 5–96%, non-condensing |
| Temperature derating | No derating specified |
| EMC immunity standard | EN 61000-6-2 |
| EMC emissions standard | EN 61000-6-3 |
| Safety standard | EN 60950 |
| Industrial control equipment approval | UL 508 |
| Electronic circuit protection approval | UL 2367 |
| Conformity marking | CE |
| Packaging unit | 1 piece |
| Country of origin | Germany |
| GTIN | 4055143363853 |
The WAGO 787-1662/000-004 is a 2-channel electronic circuit breaker used to protect industrial 24 V DC power distribution circuits against overloads and short circuits. It provides independently adjustable current protection for two connected loads and includes local diagnostics, remote resetting and signalling functionality for industrial automation systems.
The main difference is the factory-default configuration. The standard WAGO 787-1662 is supplied with its channels preset to 10 A and switched on, while the WAGO 787-1662/000-004 is factory preset to 2 A with both channels switched off. Both versions provide two independently adjustable channels with selectable current ratings of 2, 3, 4, 6, 8 and 10 A, allowing the protection settings to be adapted to compatible loads.
Each output channel can be independently configured for a nominal current of 2, 3, 4, 6, 8 or 10 A. The module operates from a 24 V DC nominal supply with an input voltage range of 18–30 V DC. With both channels configured for 10 A, the combined nominal output current is 20 A, subject to the capacity of the connected DC power supply and suitable circuit design.
Yes. The module includes a remote control input S1 that allows tripped channels to be reset using a 15–30 V DC pulse lasting at least 500 ms. Pulse-sequence commands can also be used to switch selected channels on or off. The S2 and S3 active signalling outputs provide communication and status monitoring, including a common group signal indicating switched-off or tripped channels. Each channel also includes an illuminated pushbutton for local operation.
The WAGO 787-1662/000-004 is designed for installation on a 35 mm DIN rail inside an industrial electrical control cabinet. Its compact housing measures 90 × 45 × 115.5 mm, with the depth measured from the upper edge of the DIN rail, and has an IP20 protection rating. The module features electronic overload and short-circuit protection, an internal T 15 A fuse per channel and primary transient suppression. It operates at ambient temperatures from −25 to +70 °C without specified current derating. Individual output channels must not be connected in parallel or series.
WAGO EPSITRON 787 electronic circuit breakers provide machine builders, electrical panel manufacturers and industrial automation engineers with dependable solutions for protecting industrial DC power distribution systems. The WAGO 787-1662/000-004 combines two independently adjustable 2–10 A protection channels, a factory-default 2 A switched-off configuration, 24 V DC operation, integrated remote control and diagnostic functionality, 99% typical efficiency and compact DIN-rail construction to support reliable circuit protection and controlled commissioning in modern industrial automation installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.