Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 70.61.8.400.0000T three-phase monitoring relay with a 208–480 V AC operating range, phase failure and phase sequence detection, 6 A changeover output and DIN rail mounting for industrial and railway electrical control systems.
£75.70
The Finder 70.61.8.400.0000T is a compact and reliable three-phase voltage monitoring relay designed to detect phase failure and incorrect phase sequence in industrial electrical systems. As part of the Finder Series 70 monitoring relay range, this specialist railway-oriented version provides dependable phase supervision for three-phase motors, industrial machinery, electrical control panels and railway electrical equipment.
The relay continuously monitors the connected three-phase supply and checks that all phases are present and arranged in the correct sequence. When an incorrect phase rotation is detected at power-up, the output relay remains de-energised. If a phase is lost during operation, the relay changes its output state, allowing an associated contactor or control circuit to respond to the fault.
With a three-phase 208–480 V AC operating range, a 6 A changeover output contact and a compact 17.5 mm DIN rail housing, the Finder 70.61.8.400.0000T is suitable for electrical installations requiring reliable phase monitoring. Its railway-oriented design is supported by conformity with relevant EN 50155, EN 61373 and EN 45545-2 requirements, making it particularly useful for railway and industrial electrical control applications.
Three-phase monitoring relays such as the Finder 70.61.8.400.0000T supervise the condition of electrical supply phases to help prevent machinery from operating under unsuitable supply conditions. Incorrect phase sequence can cause three-phase motors to rotate in the wrong direction, while phase failure can lead to abnormal motor operation, increased current in the remaining phases and potential equipment damage. The monitoring relay detects these conditions and provides an output signal that can be used to interrupt an associated control circuit.
The Finder 70.61T uses positive output logic, meaning its normally open output contact closes when the three-phase supply is correct. If the phase sequence is incorrect at power-up, the relay will not energise. When a phase is lost during operation, the relay output releases. The design also supports phase loss detection under regeneration conditions, where a disconnected phase may retain an induced voltage from a running motor. With no fault memory, the relay automatically returns to its normal operating state when acceptable supply conditions are restored. It should be used with correctly selected contactors and protective devices rather than as a replacement for short-circuit or overload protection.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Monitoring Function | Three-phase supply | |
| Monitored Supply | Three-phase | |
| Mounting Type | DIN rail | |
| Manufacturer | Finder | |
| Series | 70 Monitoring Relays | |
| Type | 70.61T | |
| Model | 70.61.8.400.0000T | |
| Product type | Three-phase voltage monitoring relay | |
| Application | Industrial and railway electrical monitoring | |
| Monitoring functions | Phase failure and phase sequence | |
| Number of monitored phases | 3 | |
| Operating voltage range | 208–480 V AC | |
| Supply frequency | 50/60 Hz | |
| Power supply | From monitored three-phase electrical system | |
| Output configuration | 1 changeover (SPDT) | |
| Rated output contact current | 6 A | |
| Rated output contact voltage | 250 V AC | |
| Contact actuation delay | 0.5 s | |
| Phase sequence monitoring | Yes | |
| Phase failure monitoring | Yes | |
| Phase regeneration detection | Up to 80% of the average voltage of the other two phases | |
| Detection settings | Fixed, non-adjustable | |
| Fault memory | No | |
| Output operating logic | Positive logic | |
| Operating temperature | −25 to +55 °C | |
| Protection rating | IP20 | |
| Mounting type | 35 mm DIN rail | |
| Terminal type | Screw terminals | |
| Dimensions (H × W × D) | 89.8 × 17.5 × 60.8 mm | |
| Dielectric strength between supply and contacts | 3000 V | |
| Impulse withstand voltage between supply and contacts | 5 kV | |
| Applicable railway standards | EN 50155, EN 61373, EN 45545-2 | |
| EAN | 8012823372938 |
The Finder 70.61.8.400.0000T is a three-phase monitoring relay used to detect phase failure and incorrect phase sequence in industrial and railway electrical systems. It provides an output signal that can be used for alarms, interlocking and contactor control.
The relay operates with a three-phase 208–480 V AC supply at 50/60 Hz. It is powered directly from the electrical system being monitored.
The Finder 70.61.8.400.0000T detects phase failure and incorrect phase rotation. It can also detect phase loss under certain phase regeneration conditions, helping protect motor control systems from unsuitable three-phase supply conditions.
The relay provides one changeover (SPDT) contact rated at 6 A and 250 V AC, suitable for appropriately rated electrical signalling, alarm and control circuits.
Yes. The T version is designed for railway-oriented applications and conforms to relevant EN 50155, EN 61373 and EN 45545-2 requirements. Suitability for a particular railway installation should be assessed against the complete system specification.
Finder Series 70 monitoring relays provide dependable phase supervision for industrial automation, electrical distribution and railway control systems, combining compact DIN rail installation, reliable switching outputs and effective phase failure detection to support safe and efficient electrical equipment operation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.