Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB SELVTESTER-24 is a three-module medical insulation monitor for continuous supervision of 24 V AC/DC SELV circuits with an adjustable 10–50 kΩ alarm threshold and DC faulty-pole recognition.
£482.86
The ABB SELVTESTER-24 is a compact medical insulation monitoring device designed to continuously monitor insulation to earth on 24 V AC/DC SELV circuits. As part of ABB’s Earth Monitoring Devices and H+ Line range, it is specifically intended for medical locations where maintaining electrical safety and continuity of service is critical.
The SELVTESTER-24 is particularly suited to 24 V medical IT-M circuits supplying surgical and examination lamps. It continuously checks insulation resistance to earth and provides an alarm when the insulation level falls below the selected threshold. On DC systems, the device can also identify which pole is affected by the insulation fault, helping maintenance personnel locate problems more efficiently.
Operating from a 24 V AC/DC supply, the SELVTESTER-24 provides a programmable insulation alarm threshold from 10–50 kΩ. Its compact three-module DIN-rail format, clear LED indication and integrated TEST control make it straightforward to install, configure and operate in medical electrical distribution systems.
The ABB SELVTESTER-24 continuously monitors the insulation resistance between a 24 V AC/DC SELV circuit and earth. If insulation resistance falls below the selected threshold, the device provides a visual alarm so medical or maintenance personnel can identify the first insulation fault without relying on the circuit being disconnected during normal operation.
For DC circuits, the dedicated ALARM + and ALARM − indicators allow the SELVTESTER-24 to identify the affected polarity. This functionality is particularly valuable for medical lighting circuits where moving equipment and conductors can be exposed to mechanical stress. The monitor forms part of ABB’s H+ Line solution for medical locations and complements devices such as the ISOLTESTER-DIG and QSD remote signalling units.
Tick the specs you need, then view products that match.
| Monitoring Function | Insulation | |
|---|---|---|
| Product group | Earth Monitoring Devices | |
| Range | H+ Line | |
| ABB order code | 2CSM211000R1511 | |
| Product type | Medical insulation monitor | |
| Application | Insulation monitoring of SELV medical circuits | |
| Network / auxiliary supply | 24 V AC/DC | |
| Supply tolerance | ±20% | |
| Frequency | 50–60 Hz | |
| Power consumption | 3 VA | |
| Maximum measuring current | 0.5 mA | |
| Internal impedance | 50 kΩ | |
| Insulation alarm threshold | 10–50 kΩ adjustable | |
| Selectable threshold levels | 10, 20, 30, 40 and 50 kΩ | |
| Monitoring indication | ON LED, ALARM + LED and ALARM − LED | |
| Maximum remote alarm outputs | 2 QSD units | |
| Maximum terminal conductor section | 4 mm² | |
| Mounting type | DIN rail | |
| Module width | 3 modules | |
| Protection rating | IP40 front panel with cover / IP20 enclosure | |
| Weight | approx. 300 g | |
| Standards | IEC 60364-7-710; IEC 61010-1; IEC 61326-1 |
The ABB SELVTESTER-24 continuously monitors insulation to earth on 24 V AC/DC SELV circuits, particularly circuits supplying surgical and medical lighting in healthcare installations.
The insulation alarm threshold can be adjusted from 10–50 kΩ, with selectable settings of 10, 20, 30, 40 and 50 kΩ.
The SELVTESTER-24 operates from a 24 V AC/DC supply with a ±20% tolerance.
Yes. On DC circuits, the SELVTESTER-24 uses its ALARM + and ALARM − indicators to identify the polarity associated with an insulation fault.
The SELVTESTER-24 is designed for DIN-rail installation in medical electrical panels and occupies three modules, making it suitable for hospital and Group 2 medical-location distribution systems.
ABB SELVTESTER-24 provides continuous insulation supervision for 24 V AC/DC SELV medical circuits, combining programmable alarm thresholds, DC faulty-pole recognition and compact DIN-rail installation for dependable monitoring in critical healthcare environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.