Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1SVR730841R1300 ABB CM-SRS.12S Current Monitoring Relay 220–240 V AC
ABB CM-SRS.12S (1SVR730841R1300) single-phase current monitoring relay with 220–240 V AC control supply, three selectable AC/DC current measuring ranges from 0.3 A to 15 A, configurable overcurrent or undercurrent monitoring, adjustable hysteresis and one changeover contact for industrial electrical control and automation applications.
£113.52
Why Choose the ABB CM-SRS.12S Current Monitoring Relay?
The ABB CM-SRS.12S (1SVR730841R1300) is a compact and reliable single-phase current monitoring relay designed to detect overcurrent and undercurrent conditions in industrial electrical systems. As part of the ABB CM-SRS current monitoring relay series, it provides dependable current supervision for electrical equipment, machinery and automation applications requiring accurate monitoring and fault detection.
This monitoring relay features an RMS measuring principle for AC and DC currents, with three selectable measuring ranges covering 0.3–15 A. Its configurable overcurrent and undercurrent monitoring functions, adjustable switching threshold and hysteresis allow engineers to adapt the relay to different operating requirements. An integrated changeover output contact provides reliable signalling and straightforward integration with industrial control systems.
With a rated control supply voltage of 220–240 V AC and three selectable current measuring ranges of 0.3–1.5 A, 1–5 A and 3–15 A, the CM-SRS.12S is suitable for monitoring electrical loads, control circuits and industrial equipment. Its compact 22.5 mm housing and DIN rail mounting design enable straightforward installation inside electrical control panels and automation cabinets.
Key Advantages
- Reliable single-phase current monitoring relay for industrial electrical systems.
- 220–240 V AC control supply suitable for industrial control circuits.
- Three selectable current measuring ranges covering 0.3–15 A.
- Configurable overcurrent and undercurrent monitoring functions.
- RMS measuring principle for dependable AC and DC current supervision.
- Integrated changeover (SPDT) output contact rated at 250 V / 4 A.
- Adjustable hysteresis from 3–30% helps prevent unwanted switching around the configured threshold.
- Immediate relay response to threshold violations without an adjustable tripping delay.
- Front-mounted adjustment controls simplify configuration and commissioning.
- LED status indicators support convenient monitoring and fault identification.
- Compact DIN rail mounting design helps conserve space inside electrical control cabinets.
- Secure screw terminal connections simplify installation and maintenance.
Key Features
- ABB CM-SRS single-phase current monitoring relay series.
- Manufacturer part number: 1SVR730841R1300.
- 220–240 V AC rated control supply voltage.
- Three selectable current measuring ranges: 0.3–1.5 A, 1–5 A and 3–15 A.
- RMS measurement for AC and DC currents.
- Selectable overcurrent or undercurrent monitoring.
- Adjustable hysteresis: 3–30% of the threshold value.
- One changeover (SPDT) output contact rated at 250 V / 4 A.
- Open-circuit operating principle.
- Immediate switching response when the configured threshold condition is met.
- Adjustable current monitoring threshold.
- Three LED indicators for operating and relay status.
- Double-chamber cage connection terminals with screw connections.
- 22.5 mm housing width for space-efficient installation.
- DIN rail mounting for industrial electrical control panels.
- Optional sealable transparent cover for protection against unauthorised adjustments.
Technical Specifications
- Manufacturer: ABB
- Series: CM-SRS Current Monitoring Relays
- Model: CM-SRS.12S
- ABB order code: 1SVR730841R1300
- ABB product group: 310921-Measuring & Monitoring Relays
- Product type: Single-phase current monitoring relay
- Rated control supply voltage: 220–240 V AC
- Monitoring function: Overcurrent or undercurrent
- Measuring principle: RMS measurement for AC and DC currents
- Measuring range 1: 0.3–1.5 A
- Measuring range 2: 1–5 A
- Measuring range 3: 3–15 A
- Hysteresis: Adjustable, 3–30% of threshold value
- Tripping delay: Immediate response, no adjustable tripping delay
- Output contacts: 1 changeover (SPDT) contact
- Contact rating: 250 V / 4 A
- UL/CSA contact rating: B300
- Maximum operating voltage (UL/CSA): 300 V AC, output circuit
- Operating principle: Open-circuit principle
- Status indication: 3 LEDs
- Terminal type: Screw terminals with double-chamber cage connections
- Terminal tightening torque: 0.8 N·m
- Mounting type: DIN rail mounting
- Operating ambient temperature: −20 to +60 °C
- Storage temperature: −40 to +85 °C
- Dimensions (H × W × D): 85.6 × 22.5 × 103.7 mm
- Net weight: 0.168 kg
- EAN: 4016779852333
- Customs tariff number: 85364900
Reliable Current Monitoring for Industrial Electrical Systems
Current monitoring relays such as the ABB CM-SRS.12S continuously supervise electrical current and respond when the measured value crosses a configured threshold. By detecting overcurrent or undercurrent conditions, the relay helps identify abnormal electrical loading, unexpected reductions in current and changes in equipment operating conditions that could affect the reliability of connected machinery.
The CM-SRS.12S uses an RMS measuring principle to monitor AC and DC currents across three selectable measuring ranges. Engineers can configure the monitoring function, current threshold and hysteresis to match the requirements of the monitored circuit. When the configured switching conditions are met, the relay changes the state of its output contact, allowing connected control systems to activate alarms, initiate shutdown sequences or perform other protective actions.
The immediate switching response makes the CM-SRS.12S suitable for applications requiring prompt indication of abnormal current conditions. Unlike current monitoring relays with adjustable tripping delays, the CM-SRS.12S responds to threshold violations without a user-configurable delay. Its adjustable hysteresis helps prevent repeated switching when the monitored current fluctuates close to the configured threshold.
Its single changeover contact enables straightforward integration with PLC inputs, contactor control circuits and industrial alarm systems. The compact DIN rail housing, front-mounted adjustment controls and screw terminal connections make the CM-SRS.12S a practical solution for current supervision in industrial automation and electrical control installations.
Typical Applications
- Industrial single-phase current monitoring and supervision.
- Overcurrent and undercurrent detection in electrical control circuits.
- AC and DC current monitoring in industrial equipment.
- Electrical load supervision in machinery and automation systems.
- Motor operating condition monitoring and fault detection.
- Current monitoring in pumps, fans and processing equipment.
- PLC-based monitoring and alarm signalling applications.
- Electrical control panels and industrial distribution cabinets.
- Manufacturing and production equipment monitoring.
- Current supervision in conveyor and material handling systems.
- Industrial control applications requiring prompt current fault indication.
- OEM machinery and automated control systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Monitoring Function | Current | |
|---|---|---|
| Monitored Supply | Single-phase | |
| Signal / Input Range | 0.3–1.5 A | |
| Time Delay | Adjustable |
Frequently Asked Questions
What is the ABB CM-SRS.12S used for?
The ABB CM-SRS.12S is a single-phase current monitoring relay used to detect overcurrent and undercurrent conditions in industrial electrical systems. It monitors AC or DC current and switches its output contact when the configured threshold condition is reached.
What supply voltage does the ABB CM-SRS.12S require?
The CM-SRS.12S, order code 1SVR730841R1300, requires a rated control supply voltage of 220–240 V AC. This is the supply voltage for the relay itself and is separate from its selectable current measuring ranges.
What current measuring ranges are available?
The relay provides three selectable current measuring ranges: 0.3–1.5 A, 1–5 A and 3–15 A. These ranges allow the device to monitor different AC and DC current levels using its RMS measuring principle.
Can the CM-SRS.12S monitor both overcurrent and undercurrent?
Yes. The relay can be configured for either overcurrent or undercurrent monitoring. It also provides adjustable hysteresis from 3–30% of the threshold value to help prevent unwanted switching caused by small current fluctuations.
Does the CM-SRS.12S have an adjustable tripping delay?
No. The ABB CM-SRS.12S is a single-function current monitoring relay without an adjustable tripping delay. Its output relay responds immediately when the configured current threshold condition is met, subject to the device's normal switching response time.
How many output contacts does the relay have?
The ABB CM-SRS.12S features one changeover (SPDT) output contact rated at 250 V / 4 A. This contact can be connected to industrial control circuits, alarm systems, contactors or PLC inputs.
Does the ABB CM-SRS.12S measure AC and DC current?
Yes. The CM-SRS.12S uses an RMS measuring principle and supports monitoring of both AC and DC currents within its specified measuring ranges. The relay itself requires a separate 220–240 V AC control supply.
What is the difference between the CM-SRS.11S and CM-SRS.12S?
Both are ABB single-phase current monitoring relays with configurable overcurrent or undercurrent monitoring and one changeover output contact. The CM-SRS.11S monitors lower current ranges of 3–30 mA, 10–100 mA and 0.1–1 A, while the CM-SRS.12S monitors higher current ranges of 0.3–1.5 A, 1–5 A and 3–15 A. The appropriate model depends on the current levels being monitored.
What is the difference between the CM-SRS.12S and CM-SRS.22S?
The CM-SRS.12S and CM-SRS.22S support the same three current measuring ranges of 0.3–1.5 A, 1–5 A and 3–15 A. The CM-SRS.12S provides one changeover contact and immediate threshold response, while the CM-SRS.22S provides two changeover contacts and an adjustable tripping delay. The specific control supply voltage also depends on the ABB order code selected.
What type of electrical connections does the CM-SRS.12S use?
The relay features screw terminals with double-chamber cage connections, providing secure wiring connections for industrial electrical control circuits.
Where is the ABB CM-SRS.12S typically installed?
The relay is designed for DIN rail mounting inside electrical control panels, automation cabinets and industrial electrical enclosures. Its compact 22.5 mm width helps minimise the space required in industrial installations.
Trusted by Industrial Automation Professionals Worldwide
ABB CM-SRS current monitoring relays provide dependable current supervision for industrial automation, electrical control and equipment monitoring applications. With configurable overcurrent and undercurrent functions, three selectable measuring ranges, RMS measurement, adjustable hysteresis and a changeover output contact, the CM-SRS.12S offers a practical solution for detecting abnormal current conditions and supporting reliable industrial equipment operation.
