Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB CM-PSS.31S (1SVR730784R2300) is a 380 V AC three-phase monitoring relay with fixed ±10% overvoltage and undervoltage thresholds, phase failure detection, selectable phase sequence monitoring, True RMS measurement, two change-over contacts and an adjustable 0 or 0.1–30 s ON/OFF tripping delay.
£123.00
The ABB CM-PSS.31S (1SVR730784R2300) is an industrial three-phase monitoring relay designed to supervise phase failure, phase sequence, overvoltage and undervoltage conditions in three-phase electrical systems. Part of ABB's CM-PSS monitoring relay range, it provides a practical solution for monitoring the quality and availability of electrical supplies serving motors, machinery and industrial automation equipment.
Designed for a nominal three-phase voltage of 380 V AC, the CM-PSS.31S monitors line-to-line voltages against fixed overvoltage and undervoltage thresholds of ±10%. This corresponds to a monitored voltage band of 342–418 V AC. The relay also detects phase failure and offers selectable phase sequence monitoring, helping identify supply conditions that could disrupt the operation of connected three-phase equipment.
The ABB CM-PSS.31S uses a True RMS measuring principle and provides two change-over relay contacts for signalling to motor starters, contactors, alarms and automation controllers. A selectable ON-delay or OFF-delay, adjustable from 0.1 to 30 s or set to zero, allows the monitoring response to be adapted to the installation.
Powered directly by the monitored three-phase circuit, the relay requires no separate auxiliary power supply. Its compact 22.5 mm DIN rail-mounted housing, screw-terminal connections and three LED status indicators make it suitable for industrial control panels and motor control centres.
Industrial motors and automated machinery depend on stable three-phase electrical supplies. Excessive voltage, insufficient voltage, missing phases or incorrect phase rotation can lead to reduced motor performance, overheating, unexpected stoppages and damage to connected equipment. The ABB CM-PSS.31S three-phase monitoring relay helps detect these abnormal supply conditions and provides switching signals for appropriately designed protective control circuits.
The CM-PSS.31S continuously monitors the voltages between L1, L2 and L3 using its True RMS measuring principle. It is specifically designed for 380 V AC nominal three-phase supplies, with fixed undervoltage and overvoltage thresholds at 342 V AC and 418 V AC respectively. These thresholds correspond to ±10% of nominal voltage and are not user-adjustable.
When a monitored voltage moves outside the permitted band, the relay responds according to the selected delay mode. This enables the CM-PSS.31S to provide a signal that can be used to activate an alarm, stop a motor through an external contactor or inform a programmable logic controller that the three-phase supply is outside its specified limits.
The relay also includes phase failure detection, helping identify the loss of a phase in the monitored supply. Its selectable phase sequence monitoring can be enabled when correct phase rotation is important, such as in pump, compressor, conveyor and fan installations. This function is particularly useful during commissioning or after electrical maintenance, when supply conductors may have been reconnected.
The adjustable tripping delay offers additional flexibility. Users can select immediate operation or a delay from 0.1 to 30 s, with a choice of ON-delayed or OFF-delayed behaviour. This allows the response to be coordinated with the monitored process and helps avoid unnecessary reactions to certain brief supply disturbances, where the application permits delayed operation.
The two change-over output contacts can be connected to compatible control and alarm circuits. These contacts are intended for signalling and control purposes; the relay is not a circuit breaker, motor overload relay or direct motor power switching device. Any required disconnection of the main supply must be performed by appropriately rated external protective and switching equipment.
The self-powered design simplifies wiring because no separate auxiliary voltage source is required. The compact DIN rail housing, screw terminals, LED status indicators and front-mounted controls support efficient installation, commissioning and maintenance in industrial control cabinets.
Tick the specs you need, then view products that match.
| Monitoring Function | Three-phase supply | |
|---|---|---|
| Monitored Supply | Three-phase | |
| Signal / Input Range | 342–418 V AC | |
| Time Delay | Adjustable |
The ABB CM-PSS.31S monitors overvoltage, undervoltage and phase failure in three-phase electrical systems. It also provides selectable phase sequence monitoring. The relay supplies switching signals to compatible motor control, alarm and automation circuits when monitored supply conditions are outside the specified limits.
The ABB CM-PSS.31S, order code 1SVR730784R2300, is designed for a nominal three-phase voltage of 380 V AC. It uses fixed ±10% voltage thresholds, corresponding to 342 V AC undervoltage and 418 V AC overvoltage limits.
Yes. The CM-PSS.31S includes selectable phase sequence monitoring. When enabled, this function detects incorrect phase rotation and provides a switching signal to the connected control system. Phase sequence monitoring can be disabled when the application does not require it.
The overvoltage and undervoltage thresholds are fixed at ±10% of the nominal 380 V AC voltage. However, the tripping delay is adjustable, with a zero-delay setting or a range of 0.1–30 s. The relay also allows selection of ON-delayed or OFF-delayed operation.
No separate auxiliary supply is required because the CM-PSS.31S is powered directly by the monitored three-phase circuit. It provides two change-over (SPDT) relay contacts rated at 250 V AC / 4 A for appropriately rated control and alarm applications.
ABB CM-PSS three-phase monitoring relays provide dependable supervision of industrial electrical supplies. With fixed overvoltage and undervoltage thresholds, phase failure detection, selectable phase sequence monitoring, True RMS measurement and configurable tripping delays, the CM-PSS.31S supports reliable operation of motors, machinery and industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.