Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB CM-MSS.31S (1SVR730712R1400) is a 24–240 V AC/DC thermistor motor protection relay with one PTC sensor circuit, one normally open and one normally closed output contact, automatic, manual or remote reset, sensor fault detection and non-volatile fault storage for industrial motor winding temperature protection.
£99.24
The ABB CM-MSS.31S (1SVR730712R1400) is a reliable thermistor motor protection relay designed to monitor electric motor winding temperatures and help protect motors against overheating, excessive thermal loading and insufficient cooling. Part of ABB's CM-MSS motor protection relay range, it works with compatible PTC thermistor temperature sensors installed in motor windings to provide temperature-dependent protection.
Operating from a wide 24–240 V AC/DC control supply, the CM-MSS.31S continuously evaluates its connected PTC sensor circuit. When the motor reaches the thermistor's specified response temperature, the relay changes its output state, allowing a connected motor starter, contactor or automation system to initiate a protective response.
The relay combines automatic, manual and remote reset options with sensor short-circuit detection, dynamic interrupted-wire detection and non-volatile fault storage. Its one normally open and one normally closed output contact, integrated Test/Reset button and compact 22.5 mm DIN rail-mounted housing make it a practical solution for industrial motor protection and electrical control panels.
Industrial electric motors can experience excessive winding temperatures because of mechanical overload, frequent starting, inadequate ventilation, high ambient temperatures or abnormal operating conditions. These thermal stresses may damage motor insulation, shorten equipment service life and cause unexpected production downtime. The ABB CM-MSS.31S thermistor motor protection relay helps protect against these risks by monitoring temperature-sensitive PTC thermistors installed in the motor windings.
Unlike a conventional motor overload relay that estimates thermal conditions from electrical current, the CM-MSS.31S evaluates the resistance of the connected PTC thermistor sensor circuit. As the motor winding temperature approaches the thermistor's rated response temperature, sensor resistance increases sharply. The monitoring relay detects this change and switches its output contacts to signal a thermal fault.
The relay operates according to the closed-circuit principle. During normal operation, its output relay is energised when the supply and monitored sensor conditions are acceptable. When an overtemperature fault or specified sensor circuit fault occurs, the output relay releases, enabling a compatible motor contactor or control system to stop the motor or activate an alarm.
The CM-MSS.31S also monitors the integrity of its sensor circuit. Its short-circuit detection and dynamic interrupted-wire detection help identify faults that could compromise temperature monitoring. Non-volatile fault storage preserves fault information, supporting diagnosis after a supply interruption.
For fault recovery, the relay offers automatic, manual and remote reset modes. Automatic reset can be used where restart behaviour is controlled safely by the overall installation. Manual or remote reset provides an additional intervention step after the monitored fault has cleared. The appropriate reset mode should be selected according to the machine's safety requirements, particularly where unexpected motor restart could create a hazard.
The 24–240 V AC/DC supply range supports integration into a wide variety of motor control systems. With its compact DIN rail-mounted housing, screw terminals and integrated Test/Reset button, the CM-MSS.31S is suitable for motor control centres, machine control cabinets and industrial automation installations. It provides temperature monitoring and control signals rather than directly interrupting the motor's main power circuit.
Tick the specs you need, then view products that match.
| Monitoring Function | Temperature / thermistor | |
|---|---|---|
| Reset Type | Manual or automatic |
The ABB CM-MSS.31S monitors PTC thermistor sensors installed in motor windings to detect excessive motor temperatures. It helps protect industrial motors against overheating, thermal overload and insufficient cooling by providing relay switching signals to compatible motor control circuits.
The ABB CM-MSS.31S, order code 1SVR730712R1400, operates from a wide 24–240 V AC/DC control supply. This allows it to be integrated into compatible industrial AC and DC motor control systems.
The CM-MSS.31S is designed for compatible PTC thermistor temperature sensors, typically embedded in electric motor windings. It has one sensor measuring circuit and monitors changes in sensor resistance rather than measuring an adjustable temperature value in degrees Celsius.
Yes. The ABB CM-MSS.31S supports automatic, manual and remote reset after the monitored fault condition has cleared. It also includes an integrated Test/Reset button. The reset mode should be selected to suit the machine's operating and safety requirements.
The relay provides one normally open and one normally closed output contact rated at 250 V AC / 4 A. It also includes sensor short-circuit detection, dynamic interrupted-wire detection and non-volatile fault storage, supporting dependable motor temperature monitoring and fault diagnosis.
ABB CM-MSS thermistor motor protection relays provide dependable temperature-dependent protection for industrial electric motors. Combining PTC sensor monitoring, automatic and manual reset options, sensor circuit fault detection and compact DIN rail installation, the CM-MSS.31S supports reliable motor operation and helps reduce downtime caused by thermal overload and inadequate cooling.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.