Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.T1.0.000.1318 is a Class 10A thermal overload relay with an adjustable 13–18 A current setting, one normally open and one normally closed auxiliary contact, manual or automatic reset and direct-mounting compatibility with Finder 6K.13 and 6K.14 industrial contactors.
£49.50
The Finder 6K.T1.0.000.1318 is an adjustable thermal overload protection relay designed to protect industrial electric motors against sustained overload conditions. Part of the Finder 6K Series, this motor protection device is specifically designed for use with Finder 6K.13 and 6K.14 industrial contactors, providing an integrated solution for motor starter assemblies and industrial electrical control panels.
Featuring an adjustable current setting range of 13–18 A, the Finder 6K.T1.0.000.1318 enables motor overload protection to be matched to the connected motor's rated operating current. Its Class 10A tripping characteristic provides thermal overload response in accordance with the applicable IEC motor protection requirements, helping to reduce the risk of damage caused by excessive motor current.
The relay incorporates one normally open and one normally closed auxiliary contact, together with a stop button and manual or automatic reset functionality. Its direct-mounting arrangement, adjustable connection pins and IP20 protection rating make it a practical choice for industrial motor control installations using compatible Finder contactors.
The Finder 6K.T1.0.000.1318 provides thermal overload protection by monitoring the current passing through the motor circuit. When an overload condition persists beyond the relay's thermal operating characteristic, the device trips and changes the state of its auxiliary contacts. When correctly wired into the contactor control circuit, this action causes the contactor to release, disconnecting the motor from its power supply.
The 13–18 A adjustable setting range allows the protection threshold to be selected according to the motor nameplate current and installation requirements. Its Class 10A trip characteristic, manual or automatic reset options and integrated stop button provide flexibility for industrial motor starter designs. The relay is intended for overload protection and must be used alongside appropriately selected short-circuit protective devices.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | AC, AC/DC, DC | |
| Manufacturer | Finder | |
| Series | 6K | |
| Model | 6K.T1.0.000.1318 | |
| Manufacturer article number | 6KT100001318 | |
| Product type | Thermal overload relay | |
| Protection function | Motor thermal overload protection | |
| Adjustable current range | 13–18 A | |
| Tripping class | Class 10A | |
| Compatible contactor series | Finder 6K.13 and 6K.14 | |
| Mounting method | Direct mounting to compatible contactors | |
| Auxiliary normally open contacts | 1 | |
| Auxiliary normally closed contacts | 1 | |
| Auxiliary contact material | AgNi (silver-nickel) | |
| Rated insulation voltage | 690 V | |
| Maximum rated operational voltage | 690 V | |
| Reset modes | Manual and automatic | |
| Local stop button | Yes | |
| Reset button | Yes | |
| Main circuit connection | Screw connection with box-clamp terminals | |
| Protection rating | IP20 | |
| Applicable standard | IEC 60947-4-1 | |
| EAN / GTIN-13 | 8012823456881 | |
| Product category | Thermal Overload Relays / Motor Protection Relays |
The Finder 6K.T1.0.000.1318 is a thermal overload relay designed to protect industrial electric motors against sustained overload conditions. It is intended for use with compatible Finder 6K.13 and 6K.14 contactors.
The relay has an adjustable overload current setting range of 13–18 A, allowing the protection threshold to be matched to a suitable motor's rated current.
The Finder 6K.T1.0.000.1318 is designed for direct mounting to Finder 6K.13 and 6K.14 industrial contactors. Its connection-pin arrangement can be adjusted for the compatible contactor types.
Class 10A identifies the relay's thermal overload tripping characteristic under standardised test conditions. It is intended for suitable motor starting applications and should be selected according to the motor's starting time and operating requirements.
Yes. The relay supports manual and automatic reset modes, allowing the reset arrangement to be selected according to the motor control system's requirements. Automatic reset should only be used where unexpected motor restarting cannot create a hazard.
The Finder 6K.T1.0.000.1318 includes one normally open (1 NO) and one normally closed (1 NC) auxiliary contact for overload trip indication, contactor control and signalling circuits.
Yes. The Finder 6K.T1.0.000.1318 incorporates a stop button for local operation, together with its reset functionality.
No. This device provides thermal overload protection and is not a substitute for a fuse or circuit breaker. Suitable short-circuit protection must be provided separately according to the electrical installation and motor starter design.
The relay has a 690 V rated insulation voltage and is intended for use within its specified electrical ratings.
A contactor electrically switches a motor or other load on and off, while a thermal overload relay detects sustained excessive motor current and provides a trip signal to the control circuit. The two devices are commonly used together in a motor starter assembly.
Finder 6K Series thermal overload relays are designed for electrical engineers, industrial automation specialists, panel builders and machinery manufacturers requiring adjustable motor overload protection, dependable trip signalling and direct integration with compatible industrial contactors.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.