Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.14.9.060.4318 is a four-pole industrial contactor featuring four normally open main power contacts, a 60 V DC operating coil, an 18 A AC-3 rating at 400 V AC, a 32 A AC-1 rating and a 7.5 kW motor power rating, designed for DIN rail mounted industrial motor control and electrical load switching applications.
£65.59
The Finder 6K.14.9.060.4318 is a robust four-pole industrial contactor designed for reliable electrical load switching, three-phase motor control and industrial automation applications. Part of the Finder Series 6K, this electromagnetic contactor combines dependable switching performance with a compact construction suitable for industrial control panels, motor starter assemblies and electrical distribution systems.
Featuring four normally open (4 NO) main power contacts and a 60 V DC electromagnetic operating coil, the Finder 6K.14.9.060.4318 enables simultaneous switching of four electrical poles using a compatible DC control circuit. Its silver tin oxide (AgSnO2) contact material provides good resistance to electrical wear and contact welding, supporting dependable operation in industrial switching environments.
With an AC-3 operational current rating of 18 A at 400 V AC and a corresponding three-phase motor power rating of 7.5 kW, this contactor is suitable for motor control, pumps, ventilation equipment, conveyors and automated machinery. Its 35 mm DIN rail mounting design and IP20 protection rating make it suitable for integration into appropriately protected industrial electrical enclosures.
The Finder 6K.14.9.060.4318 operates through an electromagnetic coil controlled by a nominal 60 V DC supply. When the coil is energised, the contactor closes its four normally open main power contacts, allowing current to flow through the connected circuits. When the coil is de-energised, the contacts return to their normally open positions, disconnecting the switched loads.
The 4 NO contact configuration makes this model suitable for applications requiring four electrical poles to be switched simultaneously. In appropriately designed three-phase installations, the additional pole may be used for a fourth conductor where permitted by the electrical system design and applicable regulations. This provides greater switching flexibility than a conventional three-pole contactor.
With an 18 A AC-3 rating at 400 V AC and a corresponding 7.5 kW motor power rating, the contactor is suitable for controlling appropriately rated three-phase squirrel-cage motors. The AC-3 utilisation category covers defined motor starting and switching-off duties, making the Finder 6K.14.9.060.4318 suitable for integration into motor starter assemblies, pump control systems, conveyors and industrial machinery.
The 60 V DC coil supports integration into industrial control systems using a compatible DC control supply. Combined with its AgSnO2 contacts, DIN rail mounting design and IP20 protection rating, the contactor provides a practical switching solution for industrial electrical cabinets. Suitable overload protection, short-circuit protective devices and electrical isolation arrangements must be selected separately according to the application requirements.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | DC | |
| Coil Voltage Range | 60–72 V | |
| Manufacturer | Finder | |
| Series | 6K Industrial Contactors | |
| Manufacturer part number | 6K.14.9.060.4318 | |
| Product type | Electromagnetic industrial contactor | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO) | |
| Contact arrangement | 4PST-NO | |
| Rated coil voltage | 60 V DC | |
| Control supply type | DC | |
| AC-3 operational current at 400 V AC | 18 A | |
| AC-3 motor power at 400 V AC | 7.5 kW | |
| AC-1 operational current | 32 A | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Protection rating | IP20 | |
| Mounting type | DIN rail mounting | |
| Compatible mounting rail | 35 mm DIN rail (EN 60715) | |
| Conductor cross-section | 0.5–6 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Wire stripping length | 11 mm | |
| Rated conditional short-circuit current | 10 kA with specified protective arrangements | |
| Specified back-up fuse | 63 A gG/gL | |
| Applicable standard | IEC/EN 60947-4-1 | |
| EAN | 8012823457642 |
The Finder 6K.14.9.060.4318 is a four-pole industrial contactor used for electrical load switching, three-phase motor control and industrial automation applications. Typical uses include motor starters, generator systems, pump control and electrical distribution panels.
The contactor features four normally open (4 NO) main power contacts. All four contacts close when the electromagnetic coil is energised, allowing four electrical poles to be switched simultaneously.
The Finder 6K.14.9.060.4318 uses a 60 V DC electromagnetic operating coil. A compatible DC control supply is required, and the coil must not be connected directly to an AC supply.
The contactor has an AC-3 operational current rating of 18 A at 400 V AC for motor switching and an AC-1 operational current rating of 32 A for applicable resistive-load switching duties. The permissible current depends on the utilisation category and operating conditions.
The Finder 6K.14.9.060.4318 has an AC-3 motor power rating of 7.5 kW at 400 V AC. Motor suitability should also be checked against the motor's rated current, starting characteristics and operating duty.
A three-pole contactor switches three electrical conductors, typically the three phases of a motor circuit. A four-pole contactor, such as the Finder 6K.14.9.060.4318, provides an additional switched pole for applications requiring four conductors or circuits to be controlled together.
Yes. The contactor is designed for mounting on a 35 mm DIN rail in accordance with EN 60715, making it suitable for installation inside industrial electrical control cabinets and motor starter assemblies.
The Finder 6K.14.9.060.4318 has an IP20 protection rating. It should be installed inside a suitable electrical enclosure that provides the environmental and personnel protection required for the application.
The contactor uses silver tin oxide (AgSnO2) contacts, which provide dependable switching performance and good resistance to electrical wear and contact welding during industrial switching operations.
No. The Finder 6K.14.9.060.4318 is an electromagnetic switching device and does not independently provide motor overload protection. An appropriately selected motor overload relay or motor protection device, together with suitable short-circuit protection, should be incorporated into the electrical installation where required.
Finder Series 6K industrial contactors are designed to provide dependable electrical switching for machinery, motor control and industrial automation applications. The Finder 6K.14.9.060.4318 combines a 60 V DC operating coil, four normally open main power contacts, an 18 A AC-3 rating at 400 V AC and durable AgSnO2 contact technology, offering a practical solution for industrial motor control and four-pole electrical switching systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.