Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.14.8.110.4318 is a four-pole industrial contactor with four normally open contacts, a 110 V AC operating coil, an 18 A AC-3 current rating, a 32 A AC-1 rating and a 7.5 kW motor rating at 400 V AC, designed for DIN rail mounted motor control and industrial electrical switching applications.
£37.04
The Finder 6K.14.8.110.4318 is a reliable four-pole industrial contactor designed for electrical load switching, motor control and industrial automation applications. As part of the Finder Series 6K industrial contactor range, it combines robust electromagnetic switching technology with a compact DIN rail mounting design for use in industrial control panels and electrical distribution systems.
Featuring four normally open (4 NO) main power contacts and a 110 V AC electromagnetic operating coil, this contactor enables electrical circuits to be switched remotely using a compatible AC control supply. Its silver tin oxide (AgSnO2) contact material provides good resistance to contact welding and electrical wear, supporting dependable operation in industrial switching applications.
With an AC-3 operational current rating of 18 A, an AC-1 resistive-load current rating of 32 A and an AC-3 motor power rating of 7.5 kW at 400 V AC, the Finder 6K.14.8.110.4318 is suitable for industrial motor control, pump systems, generator applications and electrical distribution equipment. Its 35 mm DIN rail mounting arrangement allows straightforward installation inside electrical control cabinets and industrial automation panels.
Industrial contactors such as the Finder 6K.14.8.110.4318 provide electrically operated switching of power circuits through a separate control circuit. When the contactor's 110 V AC electromagnetic coil is energised, its switching mechanism closes the four normally open contacts, allowing electrical power to flow through the connected circuits. When the coil is de-energised, the contacts return to their normally open state, disconnecting the switched loads.
The four-pole contact arrangement makes this model suitable for applications requiring four circuits or conductors to be switched together. Depending on the electrical system design and applicable regulations, this can include three-phase circuits with an additional switched conductor. The contactor's 18 A AC-3 rating also supports suitable motor switching applications, including starting and disconnecting squirrel-cage motors under defined AC-3 operating conditions.
The Finder Series 6K is designed for industrial electrical switching applications where dependable performance and convenient panel integration are important. Its AgSnO2 contacts provide resistance to contact welding, while its compact DIN rail mounting construction simplifies installation and replacement within electrical control cabinets.
The contactor can be integrated with appropriately rated control relays, automation outputs and motor starter circuits. Correctly selected overload protection and short-circuit protective devices should be incorporated where required, as the contactor itself is a switching device rather than a complete motor protection system.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | AC | |
| Coil Voltage Range | 100–130 V | |
| Manufacturer | Finder | |
| Series | 6K Industrial Contactors | |
| Model | 6K.14.8.110.4318 | |
| Product type | Electromagnetic industrial contactor | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO) | |
| Contact arrangement | 4PST-NO | |
| Rated coil voltage | 110 V AC | |
| Control supply type | AC | |
| Rated contact voltage | 400 V AC | |
| AC-3 operational current | 18 A | |
| AC-1 operational current | 32 A | |
| Resistive-load current | 32 A | |
| AC-3 motor power at 400 V AC | 7.5 kW | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Protection rating | IP20 | |
| Mounting type | DIN rail mounting | |
| Compatible mounting rail | 35 mm DIN rail (EN 60715) | |
| Operate time | 10 ms | |
| Release time | 8 ms | |
| Terminal screw tightening torque | 0.8 Nm | |
| Operating temperature | −40 to +70 °C | |
| Weight | approx. 0.238 kg | |
| Applicable standard | IEC/EN 60947-4-1 | |
| Certifications and compliance | CE, UKCA, RoHS, cULus |
The Finder 6K.14.8.110.4318 is a four-pole industrial contactor used for switching electrical loads in motor control systems, generator applications, pump control equipment and industrial electrical distribution panels.
The contactor has an AC-3 operational current rating of 18 A for motor switching applications and an AC-1 operational current rating of 32 A for applicable resistive-load switching duties. The permissible current depends on the utilisation category and operating conditions.
The contactor uses a 110 V AC electromagnetic operating coil. A compatible AC control supply is required to energise the coil and close the four normally open main contacts.
The Finder 6K.14.8.110.4318 has four normally open (4 NO) main power contacts, providing a 4PST-NO switching arrangement. All four contacts operate together when the electromagnetic coil is energised.
The contactor has an AC-3 motor power rating of 7.5 kW at 400 V AC. Motor suitability must also be checked against the motor's rated current, starting characteristics and operating duty.
Yes. The contactor is designed for installation on a 35 mm DIN rail in accordance with EN 60715, making it suitable for mounting inside industrial electrical control panels and distribution cabinets.
The Finder 6K.14.8.110.4318 has an IP20 protection rating. It should be installed within a suitable electrical enclosure that provides the environmental and personnel protection required for the application.
The contactor uses silver tin oxide (AgSnO2) contacts, which provide dependable switching performance and good resistance to contact welding during repeated industrial electrical switching operations.
A three-pole contactor switches three electrical conductors, typically the three phases of a motor circuit. A four-pole contactor, such as the Finder 6K.14.8.110.4318, provides an additional switched pole for applications requiring four conductors or circuits to be controlled together. The appropriate configuration depends on the electrical installation design.
No. The Finder 6K.14.8.110.4318 is an electromagnetic switching device and does not independently provide motor overload protection. An appropriately selected motor overload relay or motor protection device, together with suitable short-circuit protection, should be incorporated into the electrical installation where required.
Finder Series 6K industrial contactors are designed to support dependable electrical switching in industrial machinery, generator systems, motor control and electrical distribution applications. The Finder 6K.14.8.110.4318 combines four normally open contacts, a 110 V AC operating coil, an 18 A AC-3 current rating and durable AgSnO2 contact technology in a DIN rail mounted design, providing a practical solution for industrial electrical control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.