Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.14.8.024.4810 is a compact 10 A AC-3 industrial contactor featuring a 24 V AC coil, three normally open main contacts, one normally open auxiliary contact, AgSnO2 contact material and a 4 kW motor power rating at 400 V AC for DIN rail-mounted industrial motor control.
£19.44
The Finder 6K.14.8.024.4810 is a compact 10 A industrial contactor designed for three-phase motor control, electrical load switching and industrial automation applications. Featuring a 24 V AC operating coil, three normally open main power contacts and one normally open auxiliary contact (3 NO + 1 NO), this four-pole contactor provides dependable electromagnetic switching with an integrated control and signalling function.
Part of the Finder Series 6K industrial contactor range, the 6K.14.8.024.4810 offers a 10 A AC-3 operational current rating at 400 V AC and a 4 kW AC-3 motor power rating. Its 24 V AC coil makes it suitable for machinery and control panels equipped with compatible low-voltage alternating-current control circuits.
The contactor combines silver tin oxide (AgSnO₂) contact material, 35 mm DIN rail mounting, a compact 45 mm-wide housing and an IP20 protection rating. Its integrated normally open auxiliary contact allows additional control and signalling functions without requiring a separate auxiliary contact block for basic applications, making it a practical choice for electrical panel builders, industrial maintenance engineers and OEM machinery manufacturers.
The Finder 6K.14.8.024.4810 operates through an electromagnetic mechanism controlled by its 24 V AC coil. When the correct control voltage is applied, the three normally open main power contacts close to supply the connected electrical load. The normally open auxiliary contact also closes, allowing a separate control or signalling circuit to respond to the contactor's operating state. Removing the coil supply returns the contacts to their normally open positions.
The integrated normally open auxiliary contact is particularly useful in industrial control systems requiring contactor status indication, auxiliary signalling or appropriately designed holding and interlocking circuits. The auxiliary contact has a different electrical duty from the main power contacts and must be used only within its specified rating. Its presence does not make it suitable for switching an additional motor phase or other high-power load.
The contactor's 10 A AC-3 rating at 400 V AC and 4 kW motor power rating make it suitable for specified squirrel-cage motor switching duties. Its AgSnO₂ contact material, compact DIN rail construction and screw terminal connections support integration into industrial electrical panels. Suitable overload protection, short-circuit protection, conductor sizing and protective coordination must be selected for the complete installation.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | AC | |
| Coil Voltage Range | 24 V | |
| Manufacturer | Finder | |
| Manufacturer Part Number | 6K.14.8.024.4810 | |
| Product Series | Finder Series 6K | |
| Contactor Type | 6K.14 | |
| Product Type | Industrial electromagnetic contactor | |
| Contact Configuration | 3 NO + 1 NO | |
| Number of Main Power Contacts | 3 normally open | |
| Number of Auxiliary Contacts | 1 normally open | |
| Total Contact Arrangement | 4-pole | |
| Nominal Coil Voltage | 24 V AC | |
| Coil Supply Type | Alternating current (AC) | |
| Rated Operational Current, AC-3 | 10 A at 400 V AC | |
| Rated Motor Power, AC-3 | 4 kW at 400 V AC | |
| Contact Material | Silver tin oxide (AgSnO₂) | |
| Mounting Method | DIN rail | |
| Compatible DIN Rail | 35 mm | |
| Electrical Connection | Screw terminals | |
| Conductor Cross-Section | 0.75–6 mm² | |
| Protection Rating | IP20 | |
| Operating Temperature Range | −40 to +70 °C | |
| Rated Conditional Short-Circuit Current | 10 kA with the manufacturer's specified protective coordination | |
| Back-Up Fuse for Specified Coordination | 63 A gG/gL | |
| Type 2 Coordination Fuse | 25 A gG/gL under the manufacturer's specified conditions | |
| Product Width | 45 mm | |
| Product Height | 64.5 mm | |
| EAN | 8012823451497 | |
| Applicable Contactor Standard | IEC/EN 60947-4-1 | |
| Product Category | Industrial motor control and electromagnetic power switching |
The Finder 6K.14.8.024.4810 is an industrial contactor designed for three-phase motor control, electrical load switching and machinery automation. It features three normally open main power contacts and one normally open auxiliary contact.
The contactor uses a 24 V AC nominal operating coil. It requires a compatible alternating-current control supply and must not be connected directly to a 24 V DC supply unless the manufacturer explicitly permits that operating condition.
The 3 NO + 1 NO configuration consists of three normally open main power contacts and one normally open auxiliary contact. The auxiliary contact provides a separate control and signalling function and is not an additional main power contact.
The Finder 6K.14.8.024.4810 has a 10 A AC-3 operational current rating at 400 V AC. AC-3 applies to specified squirrel-cage motor starting and stopping duties.
The contactor has a 4 kW AC-3 motor power rating at 400 V AC. Motor suitability must also be checked against the motor's rated current, starting characteristics, switching frequency and protection requirements.
The normally open auxiliary contact can be used for appropriately rated contactor status indication, control signalling and electrical interlocking. It closes when the contactor is energised and opens when the contactor returns to its de-energised state.
Both models belong to the Finder Series 6K.14 range and use 24 V AC coils. The 4810 version has three normally open main contacts and one normally open auxiliary contact, while the 4710 version has three normally open main contacts and one normally closed auxiliary contact.
The 4810 version has a 10 A AC-3 rating, while the 4818 version has an 18 A AC-3 rating. Both use a 3 NO + 1 NO contact arrangement, but their motor switching capabilities differ.
The contactor is designed for 35 mm DIN rail mounting. Its 45 mm-wide housing helps conserve space in industrial electrical cabinets and machinery control panels.
The Finder 6K.14.8.024.4810 supports suitable conductor cross-sections from 0.75 to 6 mm². Conductors and terminations must be selected and installed according to the manufacturer's instructions.
The contactor has a 10 kA conditional short-circuit rating with the manufacturer's specified protective coordination. The published Series 6K.14 data identifies a 63 A gG/gL back-up fuse and a 25 A gG/gL fuse for specified Type 2 coordination for the 4810 configuration. The complete installation must follow the applicable coordination requirements.
The Finder 6K.14.8.024.4810 is specified for an ambient operating temperature range of −40 to +70 °C, subject to the manufacturer's installation and operating requirements.
Finder Series 6K industrial contactors provide compact electromagnetic switching solutions for motors, machinery and electrical control systems. Their defined motor switching ratings, AgSnO₂ contact construction, DIN rail mounting and integrated auxiliary contact configurations make them a practical choice for engineers, panel builders and OEM manufacturers developing dependable industrial electrical installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.