Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.110.4309 is a Series 6K four-pole mini industrial contactor featuring a 110 V DC operating coil, four normally open contacts, a 9 A AC-3 operational current rating and a 4 kW motor rating at 400 V AC.
£30.15
The Finder 6K.04.9.110.4309 is a compact four-pole industrial contactor from the Finder Series 6K, designed for electrical load switching in industrial automation, motor control and machinery applications. Featuring a 110 V DC nominal operating coil, it provides a practical solution for equipment using direct-current control circuits.
With four normally open contacts (4 NO), a 9 A AC-3 operational current rating at 400 V AC and a 4 kW motor rating at 400 V AC, the Finder 6K.04.9.110.4309 is suitable for appropriately rated industrial motor switching applications. Its four-pole contact arrangement enables several electrical circuits to be switched simultaneously from a common control signal.
The contactor incorporates silver tin oxide (AgSnO2) contacts, screw-terminal connections and 35 mm DIN rail mounting. Its compact construction, IP20 protection and industrial switching characteristics make it suitable for integration into electrical control panels, industrial machinery and OEM equipment.
The Finder 6K.04.9.110.4309 uses an electromagnetic operating mechanism controlled by a 110 V DC supply. When the coil is energised, the four normally open contacts close, allowing the connected electrical circuits to operate. When the control supply is removed, the contactor releases and its contacts return to their normally open positions.
The four normally open contact arrangement makes this model useful where multiple circuits must be operated together. Its 9 A AC-3 rating, 4 kW motor rating and compact DIN rail-mounted construction support installation in compatible industrial motor control and automation systems. Engineers should verify the connected load characteristics, switching duty, overload protection and short-circuit coordination before installation.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | DC | |
| Coil Voltage Range | 100–130 V | |
| Manufacturer | Finder | |
| Manufacturer part number | 6K.04.9.110.4309 | |
| Product series | Series 6K | |
| Product type | Mini industrial contactor | |
| Product category | Industrial Contactors | |
| Nominal control voltage | 110 V DC | |
| Control supply type | Direct current (DC) | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO) | |
| Contact arrangement | 4PST-NO | |
| Rated operational current (AC-3, 400 V AC) | 9 A | |
| Rated motor power (AC-3, 400 V AC) | 4 kW | |
| Rated operational current (AC-1) | 20 A | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Mounting arrangement | DIN rail mounting | |
| Compatible mounting rail | 35 mm DIN rail, EN 60715 | |
| Electrical connection | Screw terminals | |
| Ingress protection | IP20 | |
| Operating temperature range | −40 to +70 °C | |
| Operating principle | Electromagnetic switching | |
| Applicable standard | IEC/EN 60947-4-1 | |
| EAN | 8012823457765 |
The Finder 6K.04.9.110.4309 is a four-pole mini industrial contactor designed for electrical load switching in industrial automation, machinery control and compatible three-phase motor applications.
The contactor has a 110 V DC nominal operating coil. The applied control voltage must comply with the manufacturer's specified operating limits.
The contactor features four normally open contacts (4 NO / 4PST-NO), allowing four electrical paths to be switched by the same electromagnetic operating mechanism.
The contactor has a 9 A rated operational current at 400 V AC under AC-3 conditions. This rating applies to the specified motor-switching utilisation category.
The Finder 6K.04.9.110.4309 has a 4 kW rated motor power at 400 V AC under AC-3 conditions. Actual motor suitability depends on the motor characteristics, starting current and operating duty.
The Finder Series 6K 9 A contactor has a 20 A AC-1 operational current rating for suitable resistive loads. This differs from its 9 A AC-3 motor-switching rating.
The contactor is designed for mounting on a standard 35 mm DIN rail in accordance with EN 60715 and uses screw-terminal electrical connections.
The contactor uses silver tin oxide (AgSnO2) contacts, which are designed for electrical switching applications within the manufacturer's specified ratings.
No. The 6K.04.9.110.4309 is a 110 V DC coil variant. A 110 V AC supply should not be substituted unless Finder expressly confirms compatibility.
Not directly. The 6K.04.9.110.4309 requires a nominal 110 V DC control supply, whereas a 48 V DC contactor uses a different coil voltage. Contact configuration, switching ratings and installation compatibility must also be checked.
The 6K.04.9.110.4309 has a 110 V DC coil and four normally open contacts, whereas the 6K.04.9.048.4709 has a 48 V DC coil, three normally open main contacts and one normally closed auxiliary mirror contact. Both are rated at 9 A under AC-3 conditions at 400 V AC, but they are not directly interchangeable.
Finder Series 6K industrial contactors provide compact electromechanical switching solutions for industrial automation engineers, electrical panel builders and OEM machinery manufacturers. The Finder 6K.04.9.110.4309 combines a 110 V DC operating coil, four normally open contacts, a 9 A AC-3 operational current rating and a 4 kW motor rating at 400 V AC for integration into compatible industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.