Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.048.4812 is a compact 12 A AC-3 mini industrial contactor featuring a 48 V DC coil, three normally open main contacts, one normally open auxiliary contact, a 5.5 kW motor rating at 400 V AC and DIN rail mounting for industrial motor control and electrical switching.
£27.95
The Finder 6K.04.9.048.4812 is a compact 12 A AC-3 mini industrial contactor designed for reliable motor control, electrical load switching and industrial automation applications. Featuring a 48 V DC operating coil and a 3 NO + 1 NO contact configuration, this four-pole contactor combines three normally open main power contacts with an additional normally open auxiliary contact for control and signalling functions.
Part of the established Finder Series 6K industrial contactor range, the 6K.04.9.048.4812 provides a 12 A AC-3 motor switching rating at 400 V AC and a 5.5 kW AC-3 motor power rating. Its DC-operated electromagnetic mechanism makes it particularly suitable for industrial control systems where a regulated 48 V DC control supply is available.
Designed for compact electrical installations, this Finder contactor features silver tin oxide (AgSnO₂) contacts, 35 mm DIN rail mounting, screw terminal connections and an IP20 protection rating. The combination of three main power contacts and a separate normally open auxiliary contact makes it a practical solution for industrial motor control, contactor status indication and OEM machinery applications.
The Finder 6K.04.9.048.4812 operates using an electromagnetic mechanism controlled by its 48 V DC coil. When the correct control voltage is applied, the contactor closes its three normally open main power contacts and its normally open auxiliary contact. Removing the coil supply causes the contacts to return to their normally open positions, interrupting the controlled electrical circuits.
The contactor's 12 A AC-3 operational rating is intended for specified squirrel-cage motor switching duties, including motor starting and switching off during normal running. Its 20 A AC-1 rating applies to non-inductive or slightly inductive electrical loads. These utilisation categories represent different switching conditions, so contactor selection must account for the actual load current, voltage, motor starting characteristics and operating frequency.
A distinguishing feature of the 4812 configuration is the additional normally open auxiliary contact. This contact can be used for contactor energisation feedback, control circuit signalling or suitable interlocking functions, provided its separate electrical rating is respected. It should not be treated as an additional main motor power contact. The contactor's AgSnO₂ contacts, compact DIN rail construction and DC-operated coil support dependable integration into industrial automation and electrical control assemblies.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | DC | |
| Coil Voltage Range | 42–48 V | |
| Manufacturer | Finder | |
| Manufacturer Part Number | 6K.04.9.048.4812 | |
| Product Series | Finder Series 6K | |
| Contactor Type | 6K.04 | |
| Product Type | Mini industrial contactor | |
| Contact Configuration | 3 NO + 1 NO | |
| Main Power Contacts | 3 normally open | |
| Auxiliary Contacts | 1 normally open | |
| Total Contact Poles | 4 | |
| Nominal Coil Voltage | 48 V DC | |
| Coil Supply Type | Direct current (DC) | |
| Rated Operational Current, AC-3 | 12 A at 400 V AC | |
| Rated Motor Power, AC-3 | 5.5 kW at 400 V AC | |
| Rated Operational Current, AC-1 | 20 A | |
| Auxiliary Contact Rating, AC-15 | 2 A at 400 V AC | |
| Contact Material | Silver tin oxide (AgSnO₂) | |
| Mounting Method | DIN rail | |
| Compatible DIN Rail | 35 mm, EN 60715 | |
| Electrical Termination | Screw terminals | |
| Compatible Conductor Cross-Section | 0.5–2.5 mm² | |
| Terminal Tightening Torque | 0.8 Nm | |
| Wire Stripping Length | 8 mm | |
| Protection Rating | IP20 | |
| Rated Conditional Short-Circuit Current | 3 kA with specified protective arrangements | |
| Specified Back-Up Fuse | 40 A gG/gL type, subject to the manufacturer's coordination requirements | |
| Operating Temperature Range | −40 to +70 °C | |
| Product Width | 45 mm | |
| Product Height | 57.5 mm | |
| EAN | 8012823458175 | |
| Applicable Contactor Standard | IEC/EN 60947-4-1 | |
| Product Category | Industrial motor control and electromagnetic power switching |
The Finder 6K.04.9.048.4812 is a mini industrial contactor designed for three-phase motor control, electrical load switching and industrial automation. It combines three normally open main power contacts with one normally open auxiliary contact.
The contactor uses a 48 V DC nominal operating coil. It requires an appropriately rated direct-current control supply and should not be connected directly to a 48 V AC supply.
The 3 NO + 1 NO arrangement consists of three normally open main power contacts and one normally open auxiliary contact. All four contacts close when the contactor coil is energised, but the auxiliary contact has a separate control-duty rating.
The Finder 6K.04.9.048.4812 has a 12 A AC-3 operational current rating at 400 V AC. AC-3 applies to specified squirrel-cage motor starting and stopping duties.
The contactor has a specified 5.5 kW AC-3 motor power rating at 400 V AC. Selection must also consider the motor's rated current, starting characteristics, switching duty and required overload and short-circuit protection.
The contactor has a 20 A AC-1 operational current rating for non-inductive or slightly inductive loads. This rating should not be substituted for the AC-3 motor switching rating.
The additional normally open auxiliary contact can be used for appropriately designed contactor status indication, control signalling and electrical interlocking. Its specified 2 A AC-15 rating at 400 V AC must be respected.
The contactor is designed for installation on a standard 35 mm DIN rail in accordance with EN 60715. Its compact housing is suitable for industrial electrical cabinets and machinery control panels.
The Finder 6K.04.9.048.4812 uses silver tin oxide (AgSnO₂) contacts, which offer resistance to electrical wear and contact welding during appropriately rated switching operations.
Both models belong to the Finder Series 6K.04 range and feature a 3 NO + 1 NO contact arrangement with a 12 A AC-3 rating. The 6K.04.9.048.4812 uses a 48 V DC coil, while the 6K.04.9.024.4812 uses a 24 V DC coil. Their control supply requirements differ, so they are not directly interchangeable without checking the control circuit.
Within the Finder Series 6K.04 range, the 4812 version provides three normally open main contacts and one normally open auxiliary contact. The 4712 version provides three normally open main contacts and one normally closed auxiliary contact. The appropriate version depends on whether the control circuit requires normally open or normally closed auxiliary signalling.
The Finder 6K.04.9.048.4812 belongs to the Series 6K industrial contactor range, which supports an operating temperature range of −40 to +70 °C, subject to the manufacturer's applicable electrical loading and installation conditions.
Finder Series 6K mini industrial contactors provide compact electromagnetic switching solutions for industrial motors, machinery and electrical control systems. Their defined AC-3 motor ratings, AgSnO₂ contact construction, DIN rail mounting and flexible auxiliary contact arrangements make them a practical choice for engineers, panel builders and OEM manufacturers developing dependable industrial automation equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.