Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.048.4312 is a Series 6K four-pole mini industrial contactor featuring a 48 V DC operating coil, four normally open contacts, a 12 A AC-3 operational current rating and a 5.5 kW motor rating at 400 V AC.
£30.41
The Finder 6K.04.9.048.4312 is a compact four-pole mini industrial contactor from the Finder Series 6K, designed for electrical switching in industrial automation, motor control and machinery applications. Featuring a 48 V DC nominal operating coil, it provides electromagnetic switching for compatible DC control systems.
With four normally open contacts (4 NO) and a 12 A AC-3 operational current rating at 400 V AC, the Finder 6K.04.9.048.4312 is suitable for appropriately rated industrial motor loads. Its 5.5 kW motor switching rating at 400 V AC makes it a practical choice for three-phase motor control applications.
The contactor incorporates silver tin oxide (AgSnO2) contacts, screw-terminal connections and mounting on a standard 35 mm DIN rail. Its compact construction helps simplify integration into industrial electrical panels, machinery control cabinets and OEM equipment.
The Finder 6K.04.9.048.4312 operates through an electromagnetic coil controlled by a 48 V DC supply. When the coil is energised, its four normally open contacts close, allowing the connected electrical circuits to operate. When the control supply is removed, the contacts return to their normally open positions, interrupting the controlled circuits.
The four-pole contact arrangement allows multiple electrical paths to be switched from a common control signal. Combined with its 12 A AC-3 rating, 5.5 kW motor rating and DIN rail-mounted construction, the contactor is suitable for compatible industrial motor control and automation systems. Engineers should verify the applicable utilisation category, load characteristics, motor overload protection and short-circuit coordination before installation.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | DC | |
| Coil Voltage Range | 42–48 V | |
| Manufacturer | Finder | |
| Manufacturer part number | 6K.04.9.048.4312 | |
| Product series | Series 6K | |
| Product type | Mini industrial contactor | |
| Product category | Industrial Contactors | |
| Nominal control voltage | 48 V DC | |
| Control supply type | Direct current | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO) | |
| Contact arrangement | 4PST-NO | |
| Rated operational current (AC-3, 400 V AC) | 12 A | |
| Rated motor power (AC-3, 400 V AC) | 5.5 kW | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Mounting arrangement | DIN rail mounting | |
| Compatible mounting rail | 35 mm DIN rail, EN 60715 | |
| Electrical connection | Screw terminals | |
| Minimum conductor cross-section | 0.5 mm² | |
| Maximum conductor cross-section | 2.5 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Conductor stripping length | 8 mm | |
| Rated conditional short-circuit current | 3 kA with specified protective coordination | |
| Specified back-up fuse | 40 A gL/gG type | |
| Operating principle | Electromagnetic | |
| EAN | 8012823457833 |
The Finder 6K.04.9.048.4312 is a four-pole mini industrial contactor used for switching electrical loads in industrial automation, motor control, machinery and electrical distribution applications.
The contactor has a 48 V DC nominal operating coil. The control supply must comply with Finder's specified operating voltage limits.
The contactor features four normally open contacts (4 NO / 4PST-NO), allowing four electrical circuits to be switched by the same electromagnetic operating mechanism.
The contactor has a 12 A rated operational current at 400 V AC under AC-3 conditions. This rating applies to the specified motor-switching utilisation category.
The contactor has a 5.5 kW motor rating at 400 V AC under AC-3 conditions. The suitability of an individual motor must be checked against its starting characteristics, operating duty and protective requirements.
The Finder 6K.04.9.048.4312 uses silver tin oxide (AgSnO2) contacts, a material commonly used for industrial electrical switching.
The contactor is designed for installation on a 35 mm DIN rail in accordance with EN 60715 and uses screw-terminal electrical connections.
The Finder Series 6K.04 terminal specification supports a conductor cross-section range of 0.5–2.5 mm². The specified terminal tightening torque is 0.8 Nm, with an 8 mm conductor stripping length.
No. The 6K.04.9.048.4312 is a 48 V DC coil variant. An AC supply should not be substituted unless expressly authorised by Finder for this product.
Not directly. The 6K.04.9.048.4312 requires a nominal 48 V DC control supply, whereas a 24 V DC contactor uses a different coil voltage. The contact configuration, switching ratings and installation requirements must also be checked before substitution.
The 6K.04.9.048.4312 has a 48 V DC coil and a 12 A AC-3 rating, whereas the 6K.04.9.012.4309 has a 12 V DC coil and a 9 A AC-3 rating. Both belong to the Finder Series 6K four-pole contactor family, but they are not directly interchangeable without checking the electrical requirements.
Finder Series 6K industrial contactors provide compact electromechanical switching solutions for industrial automation engineers, electrical panel builders and OEM machinery manufacturers. The Finder 6K.04.9.048.4312 combines a 48 V DC operating coil, four normally open contacts, a 12 A AC-3 operational current rating and a 5.5 kW motor rating at 400 V AC for integration into compatible industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.