Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.024.4812 is a compact 12 A miniature industrial contactor featuring a 24 V DC coil, three normally open main contacts, one normally open auxiliary contact, a 5.5 kW AC-3 motor rating at 400 V AC and DIN rail mounting for industrial automation and motor control applications.
£27.95
The Finder 6K.04.9.024.4812 is a compact 12 A miniature industrial contactor from the Finder 6K Series, featuring a 24 V DC operating coil, three normally open main contacts and one normally open auxiliary contact for motor control, industrial automation and electrical switching applications.
Designed for installation within electrical control panels, the contactor offers a 12 A AC-3 operational current rating at 400 V AC and a corresponding 5.5 kW three-phase motor rating. Its three main contacts provide simultaneous switching of three-phase loads, while the additional normally open auxiliary contact supports signalling, control logic and electrical interlocking.
With silver tin oxide (AgSnO₂) contact material, 35 mm DIN rail mounting, screw-terminal connections and a compact 45 mm housing width, the Finder 6K.04.9.024.4812 provides a practical solution for panel builders, electrical engineers and OEM equipment manufacturers.
Industrial contactors allow low-voltage control systems to switch higher-power electrical equipment through electromagnetically operated contacts. When the 24 V DC coil of the Finder 6K.04.9.024.4812 is energised, its three normally open main contacts close to supply the connected electrical load. The normally open auxiliary contact also closes, providing an additional switching signal for control or monitoring circuits.
With a 12 A AC-3 rating and 5.5 kW motor switching capability at 400 V AC, this contactor is suitable for appropriately rated three-phase motor applications, including pumps, ventilation systems, conveyors and industrial machinery. The auxiliary contact can be incorporated into motor starter holding circuits, control logic or status indication arrangements.
The compact DIN rail-mounted design helps simplify installation in electrical control cabinets. Engineers should verify the motor full-load current, starting characteristics, utilisation category, switching frequency and protective-device coordination before installation. The contactor performs electrical switching and must be used with suitable overload and short-circuit protection where required.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | DC | |
| Coil Voltage Range | 24 V | |
| Manufacturer | Finder | |
| Series | 6K Series | |
| Manufacturer part number | 6K.04.9.024.4812 | |
| Product type | Miniature industrial electromagnetic contactor | |
| Number of poles | 4, including auxiliary contact | |
| Main contact configuration | 3 normally open (3 NO) | |
| Auxiliary contact configuration | 1 normally open (1 NO) | |
| Nominal coil voltage | 24 V DC | |
| Control supply type | DC | |
| Rated operational current (AC-3, 400 V AC) | 12 A | |
| Rated motor power (AC-3, 400 V AC) | 5.5 kW | |
| Rated operational current (AC-1) | 20 A | |
| Rated auxiliary contact current (AC-15, 400 V AC) | 2 A | |
| Contact material | Silver tin oxide (AgSnO₂) | |
| Mounting type | 35 mm DIN rail | |
| Connection type | Screw terminals | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Rated conditional short-circuit current | 3 kA with specified protective devices | |
| Degree of protection | IP20 | |
| Ambient operating temperature | −40 to +70 °C | |
| Housing width | 45 mm | |
| Housing depth | 45 mm | |
| Housing height | 57.5 mm | |
| EAN | 8012823450032 |
The Finder 6K.04.9.024.4812 is a miniature industrial contactor used for switching electrical loads in motor control, industrial automation, machinery, pump systems and electrical distribution applications.
The contactor uses a 24 V DC nominal operating coil and must be connected to a compatible DC control supply. It is not designed for direct operation from a 24 V AC coil supply.
The contactor has a 12 A AC-3 operational current rating at 400 V AC and a corresponding 5.5 kW three-phase motor rating. It also provides a 20 A AC-1 rating for suitable resistive loads.
The contactor features three normally open main contacts and one normally open auxiliary contact. The main contacts switch the electrical load, while the auxiliary contact can be used for suitable signalling, holding circuits or control functions.
The contactor is designed for 35 mm DIN rail mounting and uses screw-terminal connections for conductors within the specified 0.5–2.5 mm² range. Its compact 45 mm width and IP20 protection make it suitable for installation within appropriately designed electrical control cabinets.
Finder 6K Series miniature industrial contactors provide compact electromagnetic switching solutions for motor control, industrial automation and electrical power distribution. Their practical DIN rail mounting, robust AgSnO₂ contacts and auxiliary contact options support electrical engineers, panel builders, maintenance professionals and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.