Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.024.4312 is a Series 6K four-pole industrial contactor featuring a 24 V DC coil, four normally open AgSnO2 contacts, 12 A AC-3 and 20 A AC-1 switching ratings, 5.5 kW AC-3 motor power rating, IP20 protection and compact 45 mm DIN rail mounting for industrial motor control, automation and electrical distribution.
£30.41
The Finder 6K.04.9.024.4312 is a compact four-pole industrial contactor from the Finder Series 6K range, designed for reliable electrical switching in motor control, industrial automation, power distribution and machinery applications. Featuring a 24 V DC operating coil, four normally open contacts (4PST-NO) and silver tin oxide (AgSnO2) contact material, this contactor provides an effective interface between low-voltage control circuits and higher-power electrical equipment.
With a rated operational current of 12 A under AC-3 motor-switching duty and 20 A under AC-1 resistive-load conditions, the Finder 6K.04.9.024.4312 is suitable for a wide range of appropriately rated industrial loads. Its published 5.5 kW AC-3 motor power rating makes it particularly relevant to three-phase motor control systems, while its four normally open contacts enable simultaneous switching of four electrical paths.
The contactor combines a 45 mm-wide housing, 35 mm DIN rail mounting, IP20 protection and screw-terminal connections in a practical control-panel component. Its 24 V DC coil is especially useful in industrial installations where DC control supplies are used alongside programmable logic controllers (PLCs), electronic controllers and automation equipment.
The Finder 6K.04.9.024.4312 operates using a 24 V DC electromagnetic coil that controls four normally open contacts simultaneously. When the coil is energised within its specified operating range, the contactor closes all four switching paths. Removing the coil supply causes the mechanism to release, returning the contacts to their normally open positions.
The 24 V DC control voltage is a significant advantage in modern industrial automation systems. Many control panels use 24 V DC supplies for PLCs, sensors, control relays and other electronic equipment. This contactor can be incorporated into compatible control architectures, provided the controller output or interface relay is capable of supplying the required coil current and appropriate coil suppression is included where necessary.
The four-pole normally open configuration provides flexibility for electrical installations requiring coordinated switching of four conductors. In a suitable three-phase system, three poles may be used for the phase conductors while the fourth pole is assigned to an additional switching function, subject to the electrical design and applicable regulations. All four poles are part of the contactor's switching arrangement and should not automatically be regarded as separate low-current auxiliary contacts.
The distinction between the AC-1 and AC-3 utilisation categories is essential for correct selection. The 20 A AC-1 rating applies to suitable resistive or slightly inductive loads, while the 12 A AC-3 rating applies to the specified motor-switching duty. Motors draw substantially higher currents during starting than during normal running, making the AC-3 rating the more relevant selection criterion for many motor applications.
The published 5.5 kW AC-3 motor power rating makes the contactor suitable for consideration in compatible three-phase motor control circuits. However, selection should always account for the motor's nameplate current, starting characteristics, switching frequency, ambient temperature and required short-circuit protection. More demanding duties, such as frequent reversing, plugging or inching, may require a different utilisation category.
The AgSnO2 contact material supports robust switching performance and resistance to contact welding under suitable operating conditions. Combined with the 45 mm-wide DIN rail housing, screw-terminal connections and IP20 protection, the Finder 6K.04.9.024.4312 is well suited to installation in industrial control panels and OEM electrical assemblies.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | DC | |
| Coil Voltage Range | 24 V | |
| Manufacturer | Finder | |
| Series | 6K Series Industrial Contactors | |
| Manufacturer part number | 6K.04.9.024.4312 | |
| Product type | Industrial electromagnetic mini contactor | |
| Contact configuration | 4PST-NO (four-pole single-throw, normally open) | |
| Contact form | 4 Form A | |
| Number of poles | 4 | |
| Number of normally open contacts | 4 | |
| Nominal control voltage | 24 V DC | |
| Coil voltage type | DC | |
| Rated operational voltage | 400 V AC | |
| Rated operational current, AC-3 | 12 A | |
| Rated operational current, AC-1 | 20 A | |
| Rated motor power, AC-3 | 5.5 kW | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Operate time | Approximately 15 ms | |
| Release time | Approximately 8 ms | |
| Mounting type | DIN rail | |
| Compatible mounting rail | 35 mm DIN rail, EN 60715 | |
| Housing width | 45 mm | |
| Housing height | 57.5 mm | |
| Degree of protection | IP20 | |
| Terminal connection | Screw terminals | |
| Terminal tightening torque | 0.8 Nm | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Operating temperature range | −40 to +70 °C | |
| Short-circuit protection figure | 3 kA, subject to the specified protective-device arrangement and coordination requirements | |
| EAN | 8012823450070 | |
| Approximate gross weight | 180 g | |
| Operating mechanism | Electromagnetic, non-latching | |
| Relevant utilisation categories | AC-1 and AC-3 | |
| Referenced standards | IEC/EN 60947-4-1 | |
| Listed conformity and approvals | CE, UKCA, cULus and RoHS | |
| Application category | Industrial motor control, automation and electrical power switching |
The Finder 6K.04.9.024.4312 is a four-pole industrial contactor used for electrical switching in motor control, industrial automation, machinery and power distribution systems. It features a 24 V DC coil and four normally open contacts, making it suitable for compatible DC-controlled industrial installations.
The contactor requires a 24 V DC nominal control supply. It is designed for compatible DC control circuits, including industrial automation systems. The control output must be capable of supplying the coil's required current, and the installation should follow Finder's specified coil operating limits and suppression requirements.
The 12 A AC-3 rating applies to the specified motor-switching duty, which involves higher starting currents and demanding switching conditions. The 20 A AC-1 rating applies to appropriate resistive or slightly inductive loads. The correct rating must be selected according to the actual load characteristics and utilisation category.
Yes. The contactor has a 4PST-NO (4 Form A) configuration, providing four normally open switching contacts. All four contacts close when the 24 V DC coil is energised and open when the coil is de-energised. This arrangement supports coordinated four-pole switching in appropriately designed electrical systems.
The contactor is designed for 35 mm DIN rail mounting in accordance with EN 60715. It has a 45 mm-wide housing, IP20 protection and screw terminals suitable for conductors within the specified 0.5–2.5 mm² range. The published terminal tightening torque is 0.8 Nm. Installation should follow Finder's instructions and applicable electrical safety requirements.
Finder Series 6K industrial contactors provide compact electromechanical switching solutions for motor control, industrial automation and electrical power distribution. Combining a 24 V DC operating coil, four normally open AgSnO2 contacts, 12 A AC-3 motor-switching capability, 20 A AC-1 resistive-load capacity and convenient DIN rail mounting, the Finder 6K.04.9.024.4312 is a practical choice for electrical engineers, control panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.