Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.9.012.4309 is a Series 6K four-pole industrial contactor featuring a 12 V DC control coil, four normally open contacts, a 9 A AC-3 operational current rating and a 4 kW motor rating at 400 V AC.
£30.15
The Finder 6K.04.9.012.4309 is a compact four-pole industrial contactor from the Finder Series 6K, designed for electrical load switching in industrial automation, motor control and machinery applications. Featuring a 12 V DC nominal control coil, it is suitable for compatible low-voltage DC control systems requiring dependable electromagnetic switching.
The contactor incorporates four normally open contacts (4 NO / 4PST-NO) and belongs to the Series 6K 9 A contactor range. It provides a 9 A AC-3 operational current rating at 400 V AC and a 4 kW three-phase motor rating at 400 V AC, making it suitable for appropriately rated motor switching applications.
With silver tin oxide (AgSnO2) contacts, a compact housing and mounting on a standard 35 mm DIN rail, the Finder 6K.04.9.012.4309 offers a practical switching solution for industrial electrical panels and OEM equipment. Its four normally open contacts allow multiple circuits to be operated from a single control signal.
The Finder 6K.04.9.012.4309 uses a 12 V DC electromagnetic control coil to operate four normally open contacts. When the appropriate control voltage is applied, the contactor closes its contacts, allowing current to flow through the connected load circuits. When the control coil is de-energised, the contacts return to their normally open state.
The four-pole configuration provides flexibility for applications requiring simultaneous switching of several circuits. With its 9 A AC-3 rating, 4 kW motor rating and compact DIN rail-mounted construction, this contactor can be integrated into suitable motor control and industrial automation systems. Selection must account for the actual load characteristics, switching frequency, overload protection and short-circuit coordination.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | DC | |
| Coil Voltage Range | 12 V | |
| Manufacturer | Finder | |
| Manufacturer part number | 6K.04.9.012.4309 | |
| Product series | Series 6K | |
| Product type | Mini industrial contactor | |
| Product category | Industrial Contactors | |
| Nominal control voltage | 12 V DC | |
| Control supply type | Direct current | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO) | |
| Contact arrangement | 4PST-NO | |
| Rated operational current (AC-3, 400 V AC) | 9 A | |
| Rated motor power (AC-3, 400 V AC) | 4 kW | |
| Rated operational current (AC-1) | 20 A | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Mounting type | DIN rail mounting | |
| Compatible DIN rail | 35 mm, EN 60715 | |
| Terminal connection | Screw terminals | |
| Housing width | 45 mm | |
| Housing height | 57.5 mm | |
| Ingress protection | IP20 | |
| Operating temperature range | −40 to +70 °C | |
| EAN | 8012823457727 |
The Finder 6K.04.9.012.4309 is a four-pole industrial contactor used to switch electrical loads in industrial automation, motor control, machinery and electrical distribution applications.
The contactor has a 12 V DC nominal control coil. It should be supplied from a compatible DC control circuit within the manufacturer's permitted operating limits.
The Finder 6K.04.9.012.4309 has four normally open contacts (4 NO / 4PST-NO), allowing four electrical paths to be switched by the same electromagnetic mechanism.
The contactor has a 9 A AC-3 operational current rating at 400 V AC. This rating applies to the specified motor-switching utilisation category.
The Series 6K 9 A contactor has a 4 kW motor rating at 400 V AC under AC-3 conditions. The suitability of a particular motor must be checked against its electrical characteristics and operating duty.
The Finder Series 6K 9 A contactor has a 20 A AC-1 rating for suitable resistive loads. This should not be confused with its 9 A AC-3 motor-switching rating.
The contactor is designed for mounting on a standard 35 mm DIN rail in accordance with EN 60715, making it suitable for installation in compatible industrial electrical panels.
The contactor uses silver tin oxide (AgSnO2) contacts, a material used in industrial electrical switching equipment.
No. The 6K.04.9.012.4309 is a 12 V DC coil variant. An AC supply should not be substituted unless explicitly permitted by Finder.
Not directly. The Finder 6K.04.9.012.4309 requires a nominal 12 V DC control supply, whereas a 24 V DC contactor requires a different coil voltage. Contact configuration, switching ratings and mounting compatibility must also be checked.
Finder Series 6K industrial contactors provide compact electromechanical switching solutions for industrial automation, electrical panel building and OEM machinery applications. The Finder 6K.04.9.012.4309 combines a 12 V DC control coil, four normally open contacts, a 9 A AC-3 operational rating and DIN rail mounting for integration into compatible industrial electrical systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.