Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.8.230.4709 is a four-pole industrial contactor with a 230 V AC coil, three normally open main contacts, one normally closed auxiliary contact, a 9 A AC-3 motor switching rating, 20 A AC-1 resistive load rating, 4 kW AC-3 motor switching power, AgSnO2 contacts and 35 mm DIN rail mounting.
£18.88
The Finder 6K.04.8.230.4709 is a compact four-pole industrial contactor designed for motor control, industrial automation and electrical power switching. Part of the Finder 6K Series, this model features a 230 V AC operating coil, three normally open (3 NO) main contacts and one normally closed (1 NC) auxiliary contact.
With a 9 A AC-3 motor switching rating, 20 A AC-1 resistive load rating and 4 kW AC-3 motor power rating at 400 V AC, the Finder 6K.04.8.230.4709 provides a practical switching solution for industrial motors, pumps, generators and machinery.
The contactor incorporates silver tin oxide (AgSnO2) contacts, a compact 45 mm housing width and 35 mm DIN rail mounting. Its additional normally closed auxiliary contact makes it especially useful in control circuits requiring contactor status indication, interlocking or feedback.
The Finder 6K.04.8.230.4709 operates using a 230 V AC electromagnetic coil. When the coil is energised, the three normally open main contacts close, allowing power to reach the connected load. At the same time, the normally closed auxiliary contact opens. When the coil is de-energised, the main contacts open and the auxiliary contact returns to its normally closed state.
This 3 NO + 1 NC arrangement is particularly useful in industrial motor control circuits. The three normally open contacts can be used to switch the phases of a suitable three-phase motor, while the auxiliary contact can provide a signal for interlocking, indication or control logic.
The 9 A AC-3 rating applies to specified motor switching duties, while the 20 A AC-1 rating applies to resistive or slightly inductive loads. The normally closed auxiliary contact has a separate rating and must not be treated as a fourth 9 A motor-switching pole.
Installation is straightforward thanks to the 35 mm DIN rail mounting arrangement, compact 45 mm housing and screw terminals. For motor applications, the contactor should be used with appropriately coordinated short-circuit and overload protection. Its IP20 construction is intended for installation inside a suitable electrical enclosure.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | AC | |
| Coil Voltage Range | 200–250 V | |
| Manufacturer | Finder | |
| Series | 6K Series | |
| Model | 6K.04.8.230.4709 | |
| Product type | Mini industrial contactor | |
| Number of poles | 4 | |
| Contact configuration | 3 NO + 1 NC | |
| Main contacts | 3 normally open | |
| Auxiliary contacts | 1 normally closed | |
| Auxiliary contact utilisation rating | 2 A AC-15, series specification | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Nominal coil voltage | 230 V AC | |
| Coil supply type | AC | |
| Rated operational current, AC-3 | 9 A | |
| Rated operational current, AC-1 | 20 A | |
| Rated operational voltage | 400 V AC | |
| Rated motor switching power, AC-3 | 4 kW at 400 V AC | |
| Operate time | Approximately 15 ms | |
| Release time | Approximately 8 ms | |
| Protection rating | IP20 | |
| Operating temperature | −40 to +70 °C | |
| Mounting type | 35 mm DIN rail | |
| Mounting rail standard | EN 60715 | |
| Terminal type | Screw terminals | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Housing width | 45 mm | |
| Housing height | 57.5 mm | |
| Short-circuit protection | Requires correctly selected and coordinated upstream protection | |
| Applicable contactor standard | IEC/EN 60947-4-1 | |
| EAN / GTIN | 8012823449777 |
The Finder 6K.04.8.230.4709 is an industrial contactor used for switching motors and other electrical loads in machinery, pumps, generators and control panels. It features three normally open main contacts and one normally closed auxiliary contact for suitable monitoring and control functions.
The contactor uses a 230 V AC nominal operating coil. It is intended for a compatible AC control supply and should not be connected directly to a DC supply.
The 4709 configuration identifies the 9 A AC-3 model with a 3 NO + 1 NC contact arrangement. The three normally open contacts are used for suitable power switching, while the normally closed auxiliary contact provides a separate control function.
The 9 A AC-3 rating applies to specified motor switching duties, while the 20 A AC-1 rating applies to resistive or slightly inductive loads. These ratings refer to different utilisation categories and are not interchangeable. The auxiliary contact also has its own separate electrical rating.
The contactor mounts onto a 35 mm DIN rail conforming to EN 60715 and uses screw terminals. The listed conductor connection range is 0.5–2.5 mm², with a terminal tightening torque of 0.8 Nm. Installation should be carried out inside a suitable electrical enclosure by a competent person.
Finder 6K Series industrial contactors provide compact and dependable switching for motor control, electrical distribution and industrial automation. The Finder 6K.04.8.230.4709 combines a 230 V AC coil, three normally open main contacts, one normally closed auxiliary contact, 9 A AC-3 motor switching capability and practical DIN rail mounting for modern industrial control panels.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.