Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.8.230.4312 is a four-pole industrial contactor with a 230 V AC coil, four normally open contacts, a 12 A AC-3 motor switching rating, 20 A AC-1 resistive load rating, 5.5 kW AC-3 motor switching power, AgSnO2 contacts and 35 mm DIN rail mounting.
£25.30
The Finder 6K.04.8.230.4312 is a compact four-pole industrial contactor designed for reliable switching of motors, electrical loads and industrial power circuits. Part of the Finder 6K Series, this model combines a 230 V AC operating coil, four normally open (4 NO) main contacts and a 12 A AC-3 motor switching rating in a space-saving DIN rail-mounted design.
Engineered for industrial electrical installations, the Finder 6K.04.8.230.4312 provides a 20 A AC-1 resistive load rating and a 5.5 kW AC-3 motor switching capacity under the manufacturer's specified conditions. Its silver tin oxide (AgSnO2) contacts offer cadmium-free contact construction suitable for demanding industrial switching applications.
With 35 mm DIN rail mounting, screw terminals and a compact 45 mm housing width, this contactor is an excellent choice for machinery control panels, pump installations, electrical distribution assemblies and OEM industrial equipment requiring dependable four-pole power switching.
The Finder 6K.04.8.230.4312 operates using a 230 V AC electromagnetic coil. When the coil is energised, the contactor closes its four normally open main contacts, allowing current to flow through the connected load circuits. When the coil supply is removed, the contacts return to their normally open positions.
The 12 A AC-3 rating makes this model suitable for appropriately specified motor control applications, while its 20 A AC-1 rating supports resistive and slightly inductive load switching. These ratings apply to different utilisation categories and must not be treated as interchangeable. Motor starting current, operating voltage, switching frequency and duty cycle should all be considered during contactor selection.
The four-pole contact arrangement provides flexibility in equipment requiring multiple circuits to be switched simultaneously. Depending on the installation design, the four normally open poles can be used in suitable three-phase switching arrangements where an additional switched conductor is required.
Installation is simplified by the 35 mm DIN rail mounting system, compact 45 mm housing and screw terminal connections. The IP20 protection rating makes the contactor appropriate for installation inside suitably protected electrical panels rather than unrestricted outdoor or wash-down environments.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | AC | |
| Coil Voltage Range | 200–250 V | |
| Manufacturer | Finder | |
| Series | 6K Series | |
| Model | 6K.04.8.230.4312 | |
| Product type | Industrial power contactor | |
| Contact configuration | 4 NO (4PST-NO) | |
| Number of poles | 4 | |
| Normally open main contacts | 4 | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Nominal coil voltage | 230 V AC | |
| Coil supply type | AC | |
| Rated operational current, AC-3 | 12 A | |
| Rated operational current, AC-1 | 20 A | |
| Rated operational voltage | 400 V AC | |
| Rated motor switching power, AC-3 | 5.5 kW | |
| Rated motor switching power at 440 V AC | 5.5 kW | |
| Operate time | Approximately 15 ms | |
| Release time | Approximately 8 ms | |
| Protection rating | IP20 | |
| Operating temperature | −40 to +70 °C | |
| Mounting type | 35 mm DIN rail | |
| Mounting rail standard | EN 60715 | |
| Terminal type | Screw terminals | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Housing width | 45 mm | |
| Housing height | 57.5 mm | |
| Short-circuit protection | Requires appropriately coordinated upstream protective devices | |
| Applicable contactor standard | IEC/EN 60947-4-1 | |
| EAN / GTIN | 8012823450056 |
The Finder 6K.04.8.230.4312 is a four-pole industrial contactor used for switching electrical loads in motor control systems, pumps, generators, machinery and electrical distribution panels. It features four normally open contacts and is designed for installation on a 35 mm DIN rail.
It uses a 230 V AC nominal operating coil for compatible AC control supplies. This is not a 230 V DC coil contactor, and it should only be connected to a supply that meets the manufacturer's specified coil requirements.
The 12 A AC-3 rating applies to specified motor switching duties, while the 20 A AC-1 rating applies to resistive or slightly inductive electrical loads. The appropriate rating depends on the load characteristics and the relevant utilisation category.
The contactor has four normally open main contacts (4 NO), also described as 4PST-NO. All four contacts operate together when the electromagnetic coil is energised or de-energised.
The contactor mounts onto a 35 mm DIN rail conforming to EN 60715. It uses screw terminals for specified conductor sizes from 0.5 to 2.5 mm², with a terminal tightening torque of 0.8 Nm. Installation should be completed inside a suitable electrical enclosure by a competent person.
Finder 6K Series industrial contactors provide compact, dependable switching for motor control, electrical distribution and industrial automation. The Finder 6K.04.8.230.4312 combines four normally open contacts, a 230 V AC coil, 12 A AC-3 motor switching capability, 20 A AC-1 resistive load capacity and practical DIN rail mounting for modern industrial control panels.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.