Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.8.110.4309 is a compact four-pole industrial contactor featuring a 110 V AC coil, four normally open AgSnO2 contacts, a 9 A AC-3 rating, a 20 A AC-1 rating and 4 kW motor switching capability for DIN rail-mounted industrial control applications.
£20.14
The Finder 6K.04.8.110.4309 is a compact 9 A four-pole industrial contactor from the Finder 6K Series, designed for dependable electrical switching in motor control, industrial automation and power distribution applications. Featuring a 110 V AC operating coil, four normally open contacts and a compact DIN rail-mounted construction, this contactor provides a practical solution for industrial electrical control panels and OEM machinery.
The contactor incorporates a four-pole normally open (4 NO / 4PST-NO) contact configuration, allowing four electrical circuits to be switched simultaneously using a single control signal. Its silver tin oxide (AgSnO₂) contacts support reliable switching performance, while its electromagnetic operating mechanism provides straightforward, non-latching operation.
With a 9 A AC-3 operational current rating, 20 A AC-1 resistive load rating and 4 kW three-phase motor switching capability under specified AC-3 conditions, the Finder 6K.04.8.110.4309 is suitable for a range of industrial applications. Its 45 mm housing width, screw-terminal connections and 35 mm DIN rail mounting make it particularly useful where installation space is limited.
Industrial contactors enable electrical control circuits to switch higher-power loads through electromagnetically actuated contacts. When the 110 V AC coil of the Finder 6K.04.8.110.4309 is energised, its electromagnetic mechanism closes all four normally open contacts, allowing current to flow through the connected electrical circuits. When coil power is removed, the contacts return to their normally open positions.
The Finder 6K.04.8.110.4309 is particularly useful in industrial installations requiring four-pole switching, including machinery control, motor starters, pump systems and electrical distribution assemblies. Its 9 A AC-3 rating and 4 kW motor switching capability support appropriately rated motor applications, while the 20 A AC-1 rating provides additional flexibility for resistive loads.
Its compact DIN rail-mounted design makes it suitable for control cabinets where panel space is important. Electrical engineers should verify the motor full-load current, starting characteristics, switching frequency, protective device coordination and applicable utilisation category before installation. The contactor performs switching duties and does not replace the need for appropriate overload or short-circuit protection.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | AC | |
| Coil Voltage Range | 100–130 V | |
| Manufacturer | Finder | |
| Series | 6K Series | |
| Manufacturer part number | 6K.04.8.110.4309 | |
| Product type | Industrial electromagnetic contactor | |
| Number of poles | 4 | |
| Contact configuration | 4 normally open (4 NO / 4PST-NO) | |
| Nominal coil voltage | 110 V AC | |
| Coil supply frequency | 50/60 Hz | |
| AC coil operating range | 93.5–121 V AC at 50/60 Hz | |
| Nominal AC coil consumption | 4 VA at 50 Hz | |
| Rated operational voltage | 400 V AC | |
| Rated operational current (AC-3) | 9 A | |
| Rated operational current (AC-1) | 20 A | |
| Rated motor power (AC-3) | 4 kW | |
| Contact material | Silver tin oxide (AgSnO₂) | |
| Mounting type | 35 mm DIN rail | |
| Mounting standard | EN 60715 | |
| Connection type | Screw terminals | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Operate time | 15 ms | |
| Release time | 8 ms | |
| Mechanical endurance | 5,000,000 cycles under AC coil operation | |
| Degree of protection | IP20 | |
| Ambient operating temperature | −40 to +70 °C | |
| Housing width | 45 mm | |
| Housing height | 57.5 mm | |
| EAN | 8012823449982 |
The Finder 6K.04.8.110.4309 is a four-pole industrial contactor used for switching electrical loads in motor control, industrial automation, machinery, pump systems and electrical distribution applications.
The contactor operates using a 110 V AC nominal coil at 50/60 Hz. Its specified operating voltage range is 93.5–121 V AC under standard conditions.
The contactor has a 9 A AC-3 operational current rating and a 4 kW three-phase motor switching rating under specified operating conditions. It also provides a 20 A AC-1 rating for suitable resistive electrical loads.
The contactor features four normally open (4 NO / 4PST-NO) contacts, allowing four electrical circuits to be switched simultaneously when the operating coil is energised.
The contactor is designed for 35 mm DIN rail mounting and uses screw-terminal connections for suitable conductors. Its 45 mm housing width and IP20 protection make it suitable for installation within appropriately designed electrical control cabinets.
Finder 6K Series industrial contactors provide compact and dependable switching solutions for motor control, industrial automation and electrical power distribution. Featuring robust electromagnetic operation, AgSnO₂ contacts and practical DIN rail mounting, the range supports electrical engineers, panel builders, maintenance professionals and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.