Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.8.024.4312 is a compact four-pole industrial contactor featuring a 24 V AC coil, four normally open AgSnO2 contacts, 12 A AC-3 and 20 A AC-1 ratings, a 5.5 kW motor power rating and 35 mm DIN rail mounting for industrial motor control and electrical load switching.
£25.30
The Finder 6K.04.8.024.4312 is a compact four-pole industrial contactor from the Finder Series 6K range, designed for reliable motor control, electrical load switching and industrial automation applications. Featuring a 24 V AC operating coil, four normally open power contacts (4 NO / 4PST-NO) and a 12 A AC-3 operational current rating, it provides dependable switching for motors, pumps, machinery and electrical distribution equipment.
Designed for installation on a standard 35 mm DIN rail, the Finder 6K.04.8.024.4312 combines compact dimensions with industrial switching performance. Its 20 A AC-1 resistive current rating, 400 V AC rated operational voltage and 5.5 kW AC-3 motor switching capability make it suitable for a wide range of industrial electrical control applications.
The contactor incorporates silver tin oxide (AgSnO₂) contacts, selected for their resistance to electrical wear and contact welding under demanding switching conditions. With IP20 protection, screw terminals and a wide operating temperature range, the Finder Series 6K provides a practical solution for control panel manufacturers, machine builders and maintenance engineers requiring a compact, four-pole contactor.
The Finder 6K.04.8.024.4312 operates through an electromagnetic contactor mechanism. When the specified 24 V AC control voltage is applied to the coil, the contactor closes its four normally open power contacts. This allows the connected electrical circuits to be energised simultaneously. When the coil supply is removed, the contacts return to their normally open state.
Unlike a general-purpose control relay, the Finder Series 6K is designed for industrial contactor duties, including motor switching under the AC-3 utilisation category. The 12 A AC-3 rating applies to appropriately rated motor loads, while the 20 A AC-1 rating relates to non-inductive or slightly inductive loads. These ratings must not be treated as interchangeable because motor starting and switching conditions impose different electrical stresses on the contacts.
The contactor's AgSnO₂ contact material helps resist welding during switching, while its compact 35 mm DIN rail mounting supports efficient installation in industrial electrical panels. Its four-pole configuration can be used for three-phase circuits requiring an additional switched conductor, provided the complete design complies with the applicable electrical standards. Correct motor overload protection, short-circuit protection, conductor sizing and control circuit design remain essential.
Tick the specs you need, then view products that match.
| Device Type | Contactor | |
|---|---|---|
| Coil Type | AC | |
| Coil Voltage Range | 24 V | |
| Manufacturer | Finder | |
| Manufacturer Part Number | 6K.04.8.024.4312 | |
| Product Series | 6K | |
| Product Type | Mini industrial contactor | |
| Contactor Configuration | Four-pole | |
| Contact Arrangement | 4 NO / 4PST-NO | |
| Number of Main Poles | 4 | |
| Normal Contact State | Normally open | |
| Nominal Coil Voltage | 24 V AC | |
| Control Supply Type | Alternating current (AC) | |
| Rated Operational Voltage | 400 V AC | |
| Rated Operational Current, AC-1 | 20 A | |
| Rated Operational Current, AC-3 | 12 A | |
| Rated Motor Power, AC-3 | 5.5 kW at the manufacturer's specified operating voltage | |
| Contact Material | Silver tin oxide (AgSnO₂) | |
| Mounting Method | DIN rail | |
| Compatible DIN Rail | 35 mm, EN 60715 | |
| Electrical Termination | Screw terminals | |
| Terminal Tightening Torque | 0.8 Nm | |
| Conductor Cross-Section | 0.5–2.5 mm² | |
| Protection Rating | IP20 | |
| Typical Operate Time | 15 ms | |
| Typical Release Time | 8 ms | |
| Operating Temperature | −40 to +70 °C | |
| Product Width | 45 mm | |
| Product Height | 57.5 mm | |
| Applicable Contactor Standard | IEC/EN 60947-4-1 | |
| Compliance | CE, UKCA, RoHS | |
| Product Category | Industrial motor control and power switching |
The Finder 6K.04.8.024.4312 is a four-pole mini industrial contactor used for switching motors and electrical loads in machinery, pumps, generator systems and industrial control panels. It has a 12 A AC-3 motor switching rating and a 20 A AC-1 resistive load rating.
The contactor has a 24 V AC nominal operating coil. It requires a compatible alternating-current control supply and should not be connected directly to a 24 V DC supply.
The contactor features four normally open power contacts, identified as 4 NO or 4PST-NO. All four contacts close when the coil is energised.
The 20 A AC-1 rating applies to non-inductive or slightly inductive electrical loads, such as appropriately rated resistive heating circuits. The 12 A AC-3 rating applies to specified squirrel-cage motor switching duties, where motor starting currents and operating conditions place greater demands on the contactor.
The Finder 6K.04.8.024.4312 has a specified 5.5 kW AC-3 motor power rating under the manufacturer's rated operating conditions. Motor selection must also consider the motor's full-load current, starting characteristics and the required protection devices.
The contactor mounts onto a standard 35 mm DIN rail in accordance with EN 60715. Its compact design makes it suitable for industrial control cabinets and electrical distribution panels.
The Finder 6K.04.8.024.4312 uses silver tin oxide (AgSnO₂) contacts, which provide resistance to contact welding and electrical wear in appropriately rated power switching applications.
The contactor has an IP20 protection rating. It should be installed within a suitable electrical enclosure providing the additional protection required by the operating environment.
Yes. The contactor can be incorporated into a PLC-controlled system using a suitably rated output or interposing device capable of supplying its 24 V AC coil. The control circuit must be designed for the required coil load and switching characteristics.
The Finder 6K.04.8.024.4312 is specified for operation at ambient temperatures from −40 to +70 °C, subject to the manufacturer's applicable installation and electrical loading conditions.
Its four normally open poles can be incorporated into suitably designed multi-conductor switching circuits. However, whether a neutral conductor may be switched depends on the earthing arrangement, applicable wiring regulations and the complete equipment design. The contactor must not be used as a substitute for required motor overload or short-circuit protection.
Finder Series 6K mini industrial contactors provide compact, dependable switching solutions for motor control, industrial machinery and electrical distribution equipment. Their four-pole contact arrangements, DIN rail installation, AgSnO₂ contacts and clearly defined AC-1 and AC-3 ratings make them a practical choice for engineers, panel builders and OEM manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.