Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 6K.04.8.024.4309 is a four-pole industrial contactor with a 24 V AC coil, four normally open contacts, a 9 A AC-3 motor switching rating, 20 A AC-1 resistive load rating, 4 kW AC-3 motor switching power, AgSnO2 contacts and 35 mm DIN rail mounting.
£20.14
The Finder 6K.04.8.024.4309 is a compact four-pole industrial contactor designed for reliable switching of motors, electrical loads and industrial power circuits. Part of the Finder 6K Series, this model combines a 24 V AC operating coil, four normally open (4 NO) main contacts and a 9 A AC-3 motor switching rating in a practical DIN rail-mounted design.
Designed for industrial electrical installations, the Finder 6K.04.8.024.4309 offers a 20 A AC-1 resistive load rating and a 4 kW AC-3 motor switching capacity. Its silver tin oxide (AgSnO2) contacts provide a cadmium-free contact material suitable for demanding electrical switching applications.
With 35 mm DIN rail mounting, screw terminals and a compact 45 mm housing width, this contactor is well suited to machinery control panels, pump installations, power distribution assemblies and OEM industrial equipment.
The Finder 6K.04.8.024.4309 operates using a 24 V AC electromagnetic coil. When the coil is energised, the contactor closes its four normally open main contacts, allowing the connected circuits to conduct. When the coil supply is removed, the contacts return to their normally open positions.
The contactor's 9 A AC-3 rating makes it suitable for appropriately specified motor switching duties, while its 20 A AC-1 rating supports switching of resistive loads. These ratings apply to different load categories and should not be treated as interchangeable. Motor starting current, operating voltage, duty cycle and switching frequency must be considered when selecting the contactor.
The four-pole contact arrangement is useful in equipment requiring several circuits to be switched together. Depending on the installation design, the four normally open poles can be used for suitable multi-pole power switching arrangements, including applications where a fourth switched conductor is required.
Installation is simplified by the 35 mm DIN rail mounting system, compact housing and screw terminal connections. The IP20 enclosure makes the contactor suitable for installation inside appropriately protected electrical panels; it is not intended to provide unrestricted outdoor or wash-down protection.
Tick the specs you need, then view products that match.
| Terminal Type | Screw | |
|---|---|---|
| Device Type | Contactor | |
| Coil Type | AC | |
| Coil Voltage Range | 24 V | |
| Manufacturer | Finder | |
| Series | 6K Series | |
| Model | 6K.04.8.024.4309 | |
| Product type | Industrial power contactor | |
| Contact configuration | 4 NO (4PST-NO) | |
| Number of poles | 4 | |
| Normally open main contacts | 4 | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Nominal coil voltage | 24 V AC | |
| Coil supply type | AC | |
| Coil frequency | 50/60 Hz | |
| Rated operational current, AC-3 | 9 A | |
| Rated operational current, AC-1 | 20 A | |
| Rated operational voltage | 400 V AC | |
| Rated motor switching power, AC-3 | 4 kW | |
| Rated motor switching power at 440 V AC | 4 kW | |
| Rated motor switching power at 690 V AC | 4 kW | |
| Operate time | Approximately 15 ms | |
| Release time | Approximately 8 ms | |
| Protection rating | IP20 | |
| Operating temperature | −40 to +70 °C | |
| Mounting type | 35 mm DIN rail | |
| Mounting rail standard | EN 60715 | |
| Terminal type | Screw terminals | |
| Conductor cross-section | 0.5–2.5 mm² | |
| Terminal tightening torque | 0.8 Nm | |
| Housing width | 45 mm | |
| Protection against short circuits | Subject to appropriate upstream protective devices and coordination | |
| EAN | 8012823449968 |
The Finder 6K.04.8.024.4309 is a four-pole industrial contactor used for switching electrical loads in motor control systems, pumps, generators, machinery and electrical distribution panels. It has four normally open contacts and is designed for mounting on a 35 mm DIN rail.
It uses a 24 V AC nominal coil, suitable for compatible 50/60 Hz control supplies. It is not a 24 V DC coil contactor and should not be connected directly to a DC supply unless explicitly permitted by the manufacturer.
The 9 A AC-3 rating applies to specified motor switching duties, while the 20 A AC-1 rating applies to resistive or slightly inductive loads. The appropriate rating depends on the electrical characteristics of the connected equipment.
The contactor has four normally open main contacts (4 NO), also described as 4PST-NO. All four contacts operate together when the coil is energised or de-energised.
The contactor mounts onto a 35 mm DIN rail conforming to EN 60715. It uses screw terminals suitable for specified conductor sizes from 0.5 to 2.5 mm², with a stated terminal tightening torque of 0.8 Nm. Installation should be carried out in a suitable electrical enclosure by a competent person.
Finder 6K Series industrial contactors provide compact, dependable switching for motor control, power distribution and industrial automation. The Finder 6K.04.8.024.4309 combines four normally open contacts, a 24 V AC coil, 9 A AC-3 motor switching capability, 20 A AC-1 resistive load capacity and practical DIN rail mounting for modern electrical control panels.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.