Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB AF190-30-11-14 industrial contactor with 250–500 V AC/DC electronic coil, 190 A AC-3 operational current and integrated auxiliary contacts for industrial motor control and automation systems.
£491.71
The ABB AF190-30-11-14, identified by product code 1SFL487002R1411, is a robust 3-pole power contactor designed for controlling large three-phase motors and switching industrial power circuits. Part of the advanced ABB AF contactor series, it is suitable for demanding motor starting, isolation, bypass and power distribution applications.
ABB AF technology uses an electronically controlled coil with a wide 250–500 V AC/DC control voltage range. This design supports reliable operation during control-voltage fluctuations, reduces coil energy consumption and helps minimise the number of contactor variants required in electrical panel inventories. Integrated surge suppression also protects connected control equipment from switching disturbances.
With a motor switching capacity of up to 90 kW at 400 V AC in AC-3 duty and the ability to switch power circuits up to 275 A in AC-1 duty, the AF190-30-11-14 is well suited to pumps, compressors, conveyors, ventilation equipment and heavy industrial machinery. Pre-mounted auxiliary contacts and main circuit bars help simplify installation within control panels and motor control centres.
Power contactors such as the ABB AF190-30-11-14 provide electrically controlled switching between an industrial power supply and a motor or other high-current load. This allows motors to be started, stopped and isolated through control devices such as push buttons, relays, programmable logic controllers and building-management systems.
The electronically controlled AF coil helps maintain stable contactor operation across a broad control-voltage range. Its reduced sensitivity to voltage variations can prevent unwanted coil drop-out or contact chatter, supporting consistent machine operation and helping reduce wear on the contactor and connected equipment.
Tick the specs you need, then view products that match.
| Terminal Type | Bar / bolt | |
|---|---|---|
| Coil Type | AC, AC/DC, DC | |
| Coil Voltage Range | 200–250 V, 380–440 V, 460–500 V | |
| Power | 90 kW | |
| Current | 190 A | |
| Voltage | 500 V | |
| Phase | Three Phase | |
| IP Rating | IP20 | |
| Poles | 3-pole | |
| Coil / Supply Voltage | 250 V DC, 380 V AC, 400 V AC, 415 V AC, 440 V AC, 480 V AC, 500 V AC | |
| Device Type | Contactor | |
| Auxiliary Contacts | 1NO + 1NC | |
| Current AC-1 | 275 A | |
| Series | AF Contactors | |
| Part number | 1SFL487002R1411 | |
| Product type | Industrial power contactor | |
| Number of poles | 3 | |
| Main contacts | 3 NO | |
| Auxiliary contacts | 1 NO + 1 NC | |
| Rated operational current AC-3 | 190 A | |
| Rated operational current AC-1 | 275 A | |
| Motor power rating | 90 kW at 400 V AC | |
| Maximum operational voltage | 1000 V IEC | |
| Control voltage | 250–500 V AC/DC | |
| Frequency | 50 / 60 Hz | |
| Mounting type | Panel mounting | |
| Terminal type | Main circuit bars | |
| Protection rating | IP20 at coil terminals | |
| Mechanical durability | up to 5 million operations | |
| Dimensions (H × W × D) | approx. 196 × 105 × 152 mm | |
| Weight | approx. 2.4 kg |
The contactor is used to start, stop and isolate large three-phase motors and to switch high-current power circuits in industrial control systems.
The AF190-30-11-14 can control motors rated up to approximately 90 kW at 400 V AC in AC-3 duty.
Its electronically controlled coil operates across a wide 250–500 V AC, 50 / 60 Hz, and DC range.
Yes. It is supplied with one normally open and one normally closed auxiliary contact for signalling, interlocking and control functions.
The AC-1 rating applies mainly to resistive or slightly inductive loads, while the AC-3 rating applies to starting and stopping squirrel-cage motors under normal operating conditions.
ABB AF contactors are widely specified by panel builders, machine manufacturers and automation engineers for dependable high-current switching, flexible coil control and reliable operation in industrial motor-control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.